A Set of 4 Good Quality Closed End Replacement Wheel Nuts

Please note the nuts supplied is exactly as shown in the photo, these after market nuts may look different compared to the Original Mazda Nuts, but the thread, seating and Hex size are all the same.

Fits All the following Mazda Models With Alloy & Steel Wheels

Mazda 121 models from 1990 to 1996

Mazda 2 models from 2002 onwards

Mazda 3 models from 2004 onwards

Mazda 5 models from 2005 onwards

Mazda 6 models from 2004 onwards

Mazda 323 models from 1980 to 2005

Mazda 626 models from 1983 to 2004

Mazda CX-3 models from 2015 onwards

Mazda CX-5 models from 2013 onwards

This Ad is for a Set of 4 Nuts

Technical Specification

Chrome Plated, 12x1.5mm Thread, 26mm Deep with closed end, overall length 29mm Taper Seat & Uses a 21mm Socket/Wrench OE Size

Important Information

Always compare the seating and thread with the original equipment fitted, The Manufacturer Strongly recommends that each installation should be inspected during fitment and thoroughly checked after fitment (by spinning the wheel if necessary) after 200 miles or 300km use. Torque settings should be in accordance with vehicle manufacturers recommendations. If you are unsure about any aspect of fitting do not attempt to fit but contact your local dealer. Your wheel hubs or brakes may be adversely affected by wrongly fitted wheel nuts. Do not use air guns to fit.

Fitment: If no choices are shown in the compatibility "Notes" field then this product should be correct for the vehicle you have selected. If you need any help please contact us through the "contact seller" tab, please include your vehicle registration number and the parts you require, we can then send you links to the correct items for your vehicle.

 

Legal Information & Product Fitment – All data in this ad is taken via third party databases, the company makes every effort to ensure the listings are accurate but responsibility will not be accepted for errors or omissions with-in the listings. You should always check the product being fitted against the part being removed and check that they are of the same specification, if you are unsure you should consult your vehicle dealership for advice. “The Company” cannot be held responsible for any consequential loss or damage caused by the incorrect fitting of a part or fitting a part that is not suitable for the vehicle application – If you are unsure you should always seek the advice and opinion of a qualified vehicle mechanic.  Any purchase made through this ad constitutes the acceptance of these terms and conditions.