Soldered and tested winding for the deep frame of a Pulse Induction metal detector 1.5x1.5m (10 turns with a soft RVV cable 20AWG), without a tube frameA soft multi-core cable 12 * 0.5 mm square was used for the manufacture. 10 turns are soldered in series in a sealed sleeve with cable glands PG. (8 turns of 1x0.5mm + 2 turns in parallel 2x0.5mm) = 10 turns.
The frame can work with pulse metal detectors: Clone Pi W, Clona PI AVR, Pirat, Koshey, K-5i, Tracker PI and others.
From the frame to the control unit there is a cable 2 meters long with a connector GX16-2p; the counterpart of the connector will be complete with a deep cable reel.
To work with this frame, you will need to make a frame from plastic pipes, or wood, without using metal near the search cable! Examples of designs in the photo gallery!
A frame made of pipes is not included in the delivery, only a cable deep coil with a size of 1.5 x 1.5 meters square as in the main photo!