THIS IS TRADE IN SERVICE

Please read this listing carefully and do not complete purchase unless you agree with all terms!

If you are not sure what part you need, PLEASE ASK!

BATTERY CHARGER BOARD: 46-288786 G2

USED IN: GE AMX4 and AMX4 PLUS PORTABLE UNITS

IMPORTANT NOTICE!!

This module will not be shipped until your old module is received in repairable condition!

ALL CORE returns must match the replacement shipped and be in repairable condition. Burnt, cracked, liquid spill or damage from an attempted repair is NOT considered an acceptable core return. 

TRADE IN SERVICE PROCESS

How does this repair service work?

1. First make a purchase for this repair service

2. You will then receive an automated message from eBay with the required shipping information and how to package your module(s) (please check your spam folder if you do not see it after 30 minutes)

3. Write the ticket number that was provided in step #2 on your board and the shipping box

4. You then ship your defective module(s) to our facility using the address provided in the message from eBay

5. We ship to you an original rebuilt module after we received your old module.

When you purchase this part, if you need it, you will also get full technical support!

NOBODY WILL EVER DO THAT!

This module is original rebuilt with 60 days replacement warranty.  Please if you are not sure what do you need, ask before you place a bid.

Repair Service:

We also offer a repair service for this part, if you have 1 or more parts you want for us to repair, we can handle it. If you have a large quantity of parts that need reparation, we can agree to a discount.

Battery Charger Board failures our service covers:

• Charge word limit after completing calibration
• Trips the circuit breaker when you turn on the unit
• Unit not displays at all
• X-ray disabled message when unit is turned ON
• 0.00 VDC on display unit when calibrating voltmeter
• Blown fuses F1-F2 when plugged in AC power
• CAL chgr Error 3 when calibrating battery charger
• When CAL battery charger 0.00 VDC on Voltmeter
• Voltmeter Error 4
• Voltmeter Error 1
• Regulator over Voltage
• Voltage on Voltmeter stays on 0.5 VDC during battery charger calibration
• Missing 6.6 PFD volts on the power supply, unit does not turn on

If there are any error that are not mentioned here, surely we can repair it just mention us about it.

Tambien hablamos español.