Specifications:

♦ Input Voltage: 12V
♦ Output power: 35W
♦ Cold start Current: 4.50 A
♦ Operating current: 3.35 ~ 3.55 A
♦ Enclosure Temperature: -40 ℃ ± 105 ℃
♦ Life: Over 3200 hours
♦ Compatibility: Cars, motorcycles, electric cars

♦ Heat Control: Aviation aluminum
♦ Warranty: 5 Years

Features:
● Most sellers in the market are different from the C/R/S interface. This product we produce is integrated with the C/R/S five ports, which greatly reduces the pressure of overseas inventory;
● Mercedes-Benz, BMW, Audi and other cars can be dedicated to high brightness,10 times brighter and more penetrating than halogen lamps;
● High efficiency, environmental protection, long life, is 10 times the life of halogen lamp;
● Applicable to a wide range of voltage, can maintain normal work under low battery voltage;
● Suitable for all kinds of high and low temperature and humid environment;
● Good shockproof function to avoid light flashing on bumpy road surface;
● Good sealing, 100% waterproof, dustproof, weatherproof;
● It does not generate unwanted glare and does not interfere with oncoming drivers
●100% plug and play, installation only takes 15 minutes
●Product quality is very stable, low repair rate;

Automotive HID headlamps advantages:
1. 300% brighter than the traditional halogen lamp.
2. White light source, easy to accept by human eyes, will not feel tired.
3. Light source material, original imported xenon pill Dow Corning Glue is imported from USA .
4. Built-in drive, EMC anti-interference, high voltage protection, high temperature protection, short circuit pr otection, non-polarity setting, high temperature resistance pure copper wire, the original car level standard joint .
5. Light body standard, temperature resistance of 150 degrees PP material match the original car quick five general chuck, 7071 superconducting heat dissipation pure aluminum, civil aviation equipment special heat conduction silicone grease
6. Aging test standard, 12-step test (material to finished product shipment), 30 minutes aging (20 minutes long light, 10 minutes strobbing), quality department approved top integrity system standar.

7.with explosion-proof, shockproof, high temperature resistance, high pressure resistance and other characteristics

Install Caution:

    1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
    2. Put the vehicle into park or make sure it is securely in gear.
    3. Make sure to have the ignition turned off and the keys removed.
    4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
    5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
    6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
    7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

Package include:Specifications:

    2 x D1S 8000K Bulbs