Tactical Scorpion Gear Laser Cut Ar500 3/8" Shooting Target Gong
Tactical Scorpion Gear Laser Cut One Ar500 3/8" Shooting Targets / Gong
Two 1/2″ mounting holes ( With thick
ears to take hits without breaking)
Hang from both holes for more stability but you can hang from a single hole. We
utilize a CNC laser cutting table for the cutting of all our AR500 products.
Plasma cutting cuts slowly, this puts a
lot of heat into the steel. ( Submerged plasma cutting machine is no better)
This excess heat can result in excessive chipping and damage near the cut edge
during use and easily shattering when shot. Plasma cutting generates large
amounts of heat that is deposited into the target, softening it’s edges. The
heat-affected zone (HAZ) generated by plasma cutting is the largest out of the
most commonly used methods for cutting abrasion resistant steel. Most AR500 is
cut with plasma cutters as they are cheap and relatively small compared to
other methods.
Superior Material : AR500 3/8″ steel
with 477 – 550 BHN
Minimum surface hardness of 477 BHN. Core hardness 450 min BHN
*3/8” AR500 steel targets work great
for the following calibers 223, 5.56, 5.45×39, 7.62×39 and 308. For velocities over 3000fps
MV use at 200 yards minimum. Handguns should be used no closer than 10 yards and rifles
100 yards.
*All targets are raw and unfinished
*All of our 3/8″ targets carry a limited lifetime guarantee from breakage
Tactical Scorpion Gear hanging target system Mounting Kit
- The only complete hanging target system pre-engineered , no need for additional hardware.
- For the mounting of one steel target to the Scorpion target stand or any similar steel target stand when hanging from wood member.
- Modular Quick assembly and disassembly
- Included hardware to hang 1 target
- Zinc plated
- Provided correct angles to targets
- 12" chain lengths
Tactical Scorpion Gear complete Add-on mounting kit . This kit has zinc plated components to provide you years of outdoor use. Contains all chain, quick links and eye hooks for a quick assembly.
The mounting kit is complete with
full instructions and CAD drawings for a quick and easy assembly.
Superior Material : Zinc plated components to provide years of outdoor service
*Design Patent Pending
*Targets and wood members not provided
Tactical Scorpion Gear modular complete hanging target system
- The only complete hanging target system available
- Pre-engineered components
- Modular Quick assembly and disassembly
- Included hardware to hang a minimum of 3 targets
- Powder coated and zinc plated
- Provided correct angles to targets
- 12" chain lengths
Tactical Scorpion Gear complete
modular hanging target system. This pre engineered system has powder coated and
zinc plated components to provide you years of outdoor use. Contains all chain,
quick links and eye hooks for a quick assembly. The "F" bracket
assemblies are laser cut from A565 steel providing unmatched strength and
versatility with the option of utilizing either 2x4 or 4x4 wood members for the
assembly. The heavy steel end-formed legs provide a tight fit to the
"F" bracket assemblies to lock out the weather and give a sturdy
stance.
The Target stand is complete with full instructions and CAD drawings for a
quick and easy assembly.
General Target Layout Guidelines: 2x4 wood member ( Up to 72" inches in length or 150 pounds of weight)
4x4 wood member ( Up to 144" inches in length or 350