Product Description
Bluetooth 5.0 Audio AUX Cable Adapter For Fiat 500/Grande Punto/Qubo/Fiorino
Feature:
1. Bluetooth 5.0 AUX adapter, backward compatible with 2.0 3.0 4.0 and so on. Plug and play, convenient to use.
2. Allows you to listen to music from your phone/pad/mp3 (with Bluetooth function), strong practicality.
3. Support common MP3 format audio, and also support WMA, WAV, FLAC and other high‑quality audio format decoding.
4. Supports DSD large‑capacity transmission, stable and fidelity data transmission between devices. Support to answer calls, which has clear sound.
5. Pair your phone or tablet with the Bluetooth module, select Aux in the radio, and you can use your phone to play music through the car speakers.
Specification:
Item Type: Bluetooth AUX Cable
Material: ABS
Voltage: DC12V
Fitment:
Replacement for ALFA ROMEO 159 built from 09/2005
Replacement for FIAT 500 built from 10/2007
Replacement for FIAT Grande Punto (Typ 199) from year 09/2005
Replacement for Fiat New Panda ISO 6pin port
Replacement for Fiat G.Punto Evo ISO 6pin port
Replacement for Fiat New Croma ISO 6pin port
Replacement for Fiat Qubo ISO 6pin port
Replacement for Fiat Fiorino 2010->
Replacement for LANCIA Musa (type 350) from year 09/2004
Replacement for LANCIA Ypsilon (type 843) from year 10/2003
Replacement for LANCIA Ypsilon (type 846) from year 07/2011
Replacement for SMART Fortwo (model 451) from year 03/2007Adapter fits on all radios with AUX-IN preparation
Installation Guide
Before installation, Please read this manual carefully.
2.1 Installation Preparation
1. This product operates on a vehicle with 12 volt or 5 volt DC negative ground system. Do not use it on other voltage system.
2. This product only fits OEM or aftermarket car stereo with CD changer port and different solutions of Bluetooth adapter would be adopted according to different brands of vehicles or different car radios.
3. Make sure car stereo is powered off before installation. Otherwise the car stereo may be damaged. It is suggested to install it a car dealer shop or professional car stereo store.
4. Usually, the car stereo needs to be removed so as to plug Bluetooth kit main connector into CD changer port on radio pack. For some car models, Bluetooth kit can be installed in glove box or trunk where external CD changer port is located.
5. Please read the car stereo wiring diagram carefully before installation (normally on the top side of car stereo). Check and confirm where are the following ports on back of the stereo:CD changer port, B+/Ub+/12V ACC port(different car stereos has different names. such as: BAT, Bup+,B-U,MEM +12, KL.30) and GND port.
2.2 Installation Steps
1. Turn off car engine and remove key from ignition, if car radio uses a security code, make sure that you have the code before unplugging the radio.
2. Unmount the radio from the dash in order to get access to the back side of the radio, and find CD Changer port at the back of the radio. For details of unmount, please refer to car user manual or car stereo manual, or ask professional staff to unmount the radio.
3. Connect wire harness to car stereo radio module unit in advance. Be sure to make a firm connection. Then attach the wire harness connector to the back of stereo to the CD changer port.
4. For some car models, connect the red wire to B+/Ub+/12V ACC port (different car stereos has different names. such as: BAT, Bup+,B-U,MEM +12, KL.30) or other correct ACC power or 5 / 12V battery power. Connect the black wire to GND port of head unit power module unit.
5. Turn on the car and power on car Head Unit, press CD (or Disc / Mode / CDC / SOURCE / AUX) button for once or twice to switch to music play mode.
6. Turn on the Bluetooth function of mobile phone, search and pair with Bluetooth device named “BT5909”, Mobile phone will be able to connect to BTA after paired successfully. Test with mobile phone to confirm whether Bluetooth music work normally.
7. After successful test, re-assemble the radio, and put wire harness and module unit box in proper place (glove box, storage box, etc.), fasten screws between module unit and wire harness. Put back car head unit into original position. Now the installation is finished.
2.3 Important Installation Notes
1. As to some vehicles with external CD Changer, which occupies original CD
changer port, Parallel Harness is needed to keep the use of original CD changer (For some models only). Installation refers to former diagram.
2. As for Audi factory radio of mini ISO 8 pin, its CDC connector is 20-pin block
connector, in order to install our Bluetooth kit, it requires to cut the 8-pin part or connect with special Audi 20-pin adapter cable.
3. As for Clarion protocol radios, such as some Subaru radio and Suzuki radio, it requires to totally unplug the wire harness from car power before installation.
Moreover, it is easy to plug connector in the opposite direction on Clarion radios, which causes short circuit. Make sure the connector is plugged in correct direction.
4. As for installation on CAN-Bus radios of Peugeot/Citroen, Renault, Ford (new) and Mazda (new) and Opel, it is required to unplug the radio from the power before installation. Otherwise, Bluetooth kit might not work properly or the radio might be damaged. Regarding Peugeot/Citroen without pre-installed CD Changer, to enable Bluetooth kit to work, the CD Changer function must be activated by professional tools. Please enquire the Peugeot/Citroen dealer on how to activate the CD Changer function.
5. As per BMW radios with CD Changer, the CD Changer must be completely
disconnected before installation (The 3-pin and the 6-pin connector, both are
located in the trunk, must be disconnected), otherwise Bluetooth kit will not be
recognized. Besides, if the BMW radios are with DSP, extra DSP kit and specific Bluetooth kit would be used.
3 Applicable Car Models
Toyota Honda Volkswagen Audi Benz Suzuki Nissan Porsche
Ford Fiat Acura BMW Wolvo Mazda Skoda Peugeot Renault
Citroen Opel,etc
This product only needs to have AUX interface or the criginal
Car CD player can be used with AUX interface.
(Please consult or confirm that you have an AUX interface
before purchasing)
1. Not compatible with stereos that have 6 CD Player built into the the stereo
2. Not compatible with the “blue & me “ Bluetooth audio streaming feature
Also many devices from 2007 in connection with the Bluetooth model KCE-400BT.
Package List:
1 x Bluetooth AUX Adapter
1 x Microphone