ACD_RemanDes: No
Adjustable: Yes
AltPA_107_mm: 362
AltPA_108_mm: 204.8
AltPA_3042_mm: 566.8
AltPA_52_mm: 53
Body Diameter: 2.087
Coil Over Springs Included: No
Compressed Length: 14.252
Dust Shield: Yes
FAQ - A1: Yes. Although shocks and struts perform a similar function, they vary greatly in their design. The major difference between shocks and struts is that a strut is a structural part of the vehicles suspension system where a shock is not. A strut is also a crucial part of the vehicles steering system and greatly affects alignment angles.
FAQ - A2: Yes. You should have your vehicle aligned if you are replacing your vehicle's struts. However, it is not necessary to get your vehicle aligned when replacing your vehicle's shocks unless there was a previous issue.
FAQ - A3: Yes. It is important to choose the correct shock or strut for your vehicle model and year, as well as for the location in the vehicle.
FAQ - Q1: Is there a difference between a shock and a strut?
FAQ - Q2: Should I have my vehicle aligned after replacing my shocks or struts?
FAQ - Q3: Do I need different shocks for front, rear, left, or right applications?
Features & Benefits - B1: Helps absorb and dampen road input into your vehicle's suspension
Features & Benefits - B2: GM-recommended replacement part for your GM vehicle's original factory component
Features & Benefits - B3: Offering the quality, reliability, and durability of GM OE
Features & Benefits - B4: Manufactured to GM OE specification for fit, form, and function
Good Maintenance Practices - S1 B1: Ball joints and other suspension components
Good Maintenance Practices - S1 B2: Brakes
Good Maintenance Practices - S1 B3: Tires
Good Maintenance Practices - S1 H: Your vehicle's shocks slowly deteriorate over time, though this wear is normally difficult to detect. Worn shocks can also cause additional wear to other vehicle components, so to maximize your vehicle's ride comfort, it is recommended to inspect your vehicle's shocks every year. Be sure to always refer to your Vehicle Owner's manual for additional vehicle maintenance practices. Potentially affected components include but are not limited to:
Good Maintenance Practices - S2 B1: Leaking oil or wetness along the body of the shock or strut
Good Maintenance Practices - S2 B2: Broken mounts
Good Maintenance Practices - S2 B3: Broken, damaged, or missing mounting hardware
Good Maintenance Practices - S2 B4: Dented reservoir tube
Good Maintenance Practices - S2 B5: Bent or scratched piston rod
Good Maintenance Practices - S2 B6: Cupped tire wear
Good Maintenance Practices - S2 B7: Damaged spring seat, spring, and spring isolator
Good Maintenance Practices - S2 H: To inspect your shocks to gauge wear, check for:
Height: 6.5
Length: 26.8
Lower Mount Type: Eyelet
Marketing Statement - Product Line: Stay with the parts brand your General Motors vehicle came with and get the quality you know and trust with ACDelco GM Original Equipment Suspension Components. ACDelco GM OE replacement parts give you the peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Suspension Components are manufactured for many makes and models of GM car, light duty truck, and sport utility vehicle.
Mkt_State_Warranty_CA: Limited Lifetime (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_US: Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details.
Product Description: ACDelco GM Original Equipment Shock Absorbers are GM-recommended replacements for your vehicle's original components. Shock absorbers help absorb and dampen road input into your vehicle's suspension, helping provide proper feel and control of your vehicle. These original equipment shock absorbers have been manufactured to fit your GM vehicle, providing the same performance, durability and service life you expect from General Motors.
Programming Required: NO
Shock Absorber Body End Measuring Point: Center of Bolt Hole
Shock Absorber Rod End Measuring Point: Center of Eyelet
Signs of Wear & Troubleshooting - S1 B1: Vehicle pulls while braking
Signs of Wear & Troubleshooting - S1 B2: Worn suspension components
Signs of Wear & Troubleshooting - S1 B3: Excessive nose dive while braking
Signs of Wear & Troubleshooting - S1 B4: Vehicle has 'acceleration squat'
Signs of Wear & Troubleshooting - S1 B5: Vehicle does not sit level
Signs of Wear & Troubleshooting - S1 B6: Vehicle steering pulls
Signs of Wear & Troubleshooting - S1 H: Signs of wear for shock absorbers include but are not limited to:
Signs of Wear & Troubleshooting - S2 B1: Your ride is harsh, bumpy or shaky
Signs of Wear & Troubleshooting - S2 B2: Your vehicle bounces excessively
Signs of Wear & Troubleshooting - S2 B3: Your vehicle leans or sways while turning
Signs of Wear & Troubleshooting - S2 B4: Your vehicle bottoms out
Signs of Wear & Troubleshooting - S2 H: It could be time to replace your shocks if, when driving on a surface with bumps and/or dips:
Signs of Wear & Troubleshooting - S3 B1: You notice fluid leakage from your vehicle's shocks
Signs of Wear & Troubleshooting - S3 B2: Your vehicle's shocks have dented or heavily scratched housings or mounts
Signs of Wear & Troubleshooting - S3 H: Uneven patches of wear on the edges of your tire can be a sign of weak ride control (shocks or struts). This wear, called cupping, appears as scalloped dips around the surface of the tread. Other signs it could be time to replace your shocks or struts include but are not limited to:
Travel Length: 8.063
Upper Mount Type: 2 Bolt
Vintage_Part_Indicator: N
Weight: 6.97
Width: 6.5

Please review our interchange above in the compatibility table to verify proper fitment of your vehicle. Or contact us for a quick response.
Keep in mind interchange tables apply only to American Market vehicles. If you live outside of the USA please research and verify it fits your vehicle before purchasing.