6 Pin MICRO USB
Description:
1, the original chip CP2102, generate COM port after installing the driver.2, then the standard input MICRO MINI-USB cable connected to the computer USB interface, with 3.3V and 5V two power output3, with a resettable fuse. In the event of accidental short-circuit can effectively protect your device and computer USB port to download4, on-board status indicators, receiving indicator properly installed drive status indicator remains, send and receive indicator flashes when the communication with run LED indicator.5, supports baud rates from 300bps ~ 1Mbps between6, the communication format support: 1) data bits 5,6,7,8; 2) support 1.5, 2 stop bits; 3) odd, even, mark, space, none parity7, supported operating systems: windows 8.1 / 7 / vista / xp / 98, Mac OS-X / OS-9, Linux8, USB seat MICRO MINI-USB interface Block9, chip components for the regular company of welding, stable quality, beautiful appearance10 with DTR trigger signal output can be directly arduino pro mini ATMEGA328P and other Arduino board download traffic.11, module size: 16mm * 20mm super small.
Features:
1. embedded USB transceiver, no external circuit device2. containing clock circuit, no external circuit device3. contains power-on reset circuitThe on-chip voltage regulator within the 3.3V output5. Meet the USB2.0 specification requirements6.SUSPEND pins support USB suspend state7. asynchronous serial data bus compatible with all handshakes and modulation controller interface signals8. Support data format is 8 data bits, 1 stop bit and the parity bit9. connotation 512 byte receive buffer and 512 byte transmit buffer10. Supports hardware or X-ON / X-OFF Handshake
How to install the driver
win7 / win81, first open the package, like the way next, remember installation directory2, according to the following method to start the service3. Locate the driver in Device Manager, select Update Driver, browse my computer for driver,select the directory just installed, determine waiting like win8.1
Right update drivers automatically find the drivers, it will prompt the driving data is invalid, in fact, the problem often encountered in windows8, the drive is no problem, the beginning has been installed on, and later discovered may be a hardware incompatibility.If you are using Windows8 or windows 8.1, but is non-genuine ghost or other systems, and uses a variety of optimization tools Streamlining system, then in the process of installing the driver, you may encounter the "Data invalid" wrong"Invalid Data" solutions are as follows:
1, press Winkey + R on the keyboard, the pop-up "Run" dialog, enter "services.msc",
also by under "Computer Management" window, find the "service";
2, found in the list of services "Device Install Service" and "Device Setup Manager" two service items,
make sure these two services is turned on, if not open, you can click the left side of the "Start" service.
Driver Download:check here
Package Included:
1PCS*MICRO USB to UART TTL Module 6Pin Serial Converter CP2102 STC Replace FT232
5PIN USB2.0 with Metal case
Features:
Stable and reliable chipset CP2102
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 5pin connector. 5pins for 3.3V,TXD,RXD,GND & 5V
All handshaking and modem interface signals
Baud rates: 300 bps to 1.0Mbps.
Byte receive buffer; 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range: -40℃ to +85℃.
Supports Windows 98SE, 2003, XP, Vista, Window7, Mac OSX , Linux 2.6.x and 2.4.36
Maximum baud rate 115200 perfect support! No longer distressed STC12 Series, STC11, STC15 series Burn!
Package Included:
1 x USB2.0 to TTL UART 5PIN Module Serial Converter CP2102 STC PRGMR with Metal case
6 Pin USB 2.0 with Cable
Feature:
This is a USB 2.0 to TTL UART 6PIN CP2102 Module Serial Converter. Connect MCU easily to your computer!
Stable and reliable chipset CP2102
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 6pin connector. 6pins for 3.3V, RST, TXD, RXD, GND & 5V.
All handshaking and modem interface signals.
Baud rates: 300 bps to 1.5 Mbps.
Byte receive buffer; 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range: -40 to +85.
Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40.
Package included:
1PCS x USB 2.0 to TTL UART CP2102 Module 6Pin Serial Converter Free Cables
1 X 4 PIN Cables
5 Pin USB 2.0 with Cable
Stable and reliable chipset CP2102
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB type A male and TTL 5pin connector. 5pins for 3.3V,TXD,RXD,GND & 5V
All handshaking and modem interface signals
Baud rates: 300 bps to 1.5 Mbps.
Byte receive buffer; 640 byte transmit buffer.
Hardware or X-On/X-Off handshaking supported.
Event character support Line break transmission.
USB suspend states supported via SUSPEND pins.
Temperature Range: -40℃to +85℃
Supports Windows 98SE, 2003, XP, Vista, Window7, Mac OSX , Linux 2.6.x and 2.4.36
main color:Red
size:about45*14*8mm
Package Included:
1 x USB 2.0 to TTL UART 5PIN Module Serial Converter CP2102 STC PRGMR Free cable
6 Pin USB 2.0
Description :
PCB Dimensions: 26.5* 15.6mm
With 3.3V and 5V dual power output
With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
With self-recovery fuse. In the event of accidental short circuit, it can effectively protect your computer USB port and Downloader
With reset signal output, etc. directly to the Arduino board Promini download!
Supported operating systems:
Windows 98/Me/2000/7
MAC OS-9
MAC OS
X-Windows CE
Linux 2.40 or later
Feature:
Brand new and high quality
Included USB transceiver, without external circuit device
Includes a clock circuit and power-on reset circuit
Meet the USB2.0 specification requirements
SUSPEND pin supports USB suspend state
Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
Supported data format is 8 data bits, 1 stop bit and parity bits
Connotation 512 byte receive buffer and 512 byte transmit buffer
Supports hardware handshaking or X-ON/X-OFF
Package Included:
1 x 6Pin USB 2.0 to TTL UART Module Converter CP2102 STC Replace FT232 CF