Description
10S 36V Electric Skateboard Controller Dual Motor Driven Type with Remote ESC Substitute
Description:
The electric longboard skateboard control system comes with a latest remote controller. This control module would be more stable and cheaper. It supports dual motors.
Features:
- A sine wave scheme makes it work more stable than the ESC and it is not easy to burn out
- Low speed but with high torque
- Two-way Communication: You can check the power of the skateboard through the remote control
- Multiple Protections: It features low-voltage alarm function, under-voltage and power-failure protections
- Max. Load Capacity: 120kg
- Fit Hub Motor RC Motors: 5055 5065 6354 6364 6374 6384
How to Connect the Remote Control and the Controller Board:
1. Connect the control board to power source.
2. Turn the control board power on, wait for 2 seconds. Then press and hold the switch for about 6 seconds till the power indication light flickers.
3. Turn on the remote control and use a small screwdriver to press the code synchronize switch in the lower left corner of the remote control.
4. Turn off the remote for two seconds and then turn it on. Wait for the remote control signal light and the switch signal light to flash at the same time, which means that the match is finished.
Specifications:
- Item Name: Four-wheel Skateboard Longboard Controller Set
- Rated Voltage: 36V 10S
- Sensing Mode: Hall
- Material: Plastic Shell
- Max Load Capacity: 120kg
- G.W.: 0.5kg
Package Included:
- 1 x Remote controller
- 1 x Control Panel
- 1 x Thermal Baffle
Note: Please not connect motor cables in parallel to make single driver to drive two motors.
Instructions for Changing the Voltage of the Controller:
6S 24V: Connect Point 1, Disconnect Point 2
7S 29.4V: Connect Point 2, Disconnect Point 1
10S 36V: Disconnect Point 1, Disconnect Point 2
Hall Sensor Connection:
3: Black (-) – GND
4: Orange (C) – W
5: White (B) – V
6: Yellow (A) – U
7: Red (+) – 5V
8 & 9: Connect the Switch (No distinction between positive and negative)
10: Switch Indication Light GND (-)
11: Switch Indication Light +
Description:
The electric longboard skateboard control system comes with a latest remote controller. This control module would be more stable and cheaper. It supports dual motors.
Features:
- A sine wave scheme makes it work more stable than the ESC and it is not easy to burn out
- Low speed but with high torque
- Two-way Communication: You can check the power of the skateboard through the remote control
- Multiple Protections: It features low-voltage alarm function, under-voltage and power-failure protections
- Max. Load Capacity: 120kg
- Fit Hub Motor RC Motors: 5055 5065 6354 6364 6374 6384
How to Connect the Remote Control and the Controller Board:
1. Connect the control board to power source.
2. Turn the control board power on, wait for 2 seconds. Then press and hold the switch for about 6 seconds till the power indication light flickers.
3. Turn on the remote control and use a small screwdriver to press the code synchronize switch in the lower left corner of the remote control.
4. Turn off the remote for two seconds and then turn it on. Wait for the remote control signal light and the switch signal light to flash at the same time, which means that the match is finished.
Specifications:
- Item Name: Four-wheel Skateboard Longboard Controller Set
- Rated Voltage: 36V 10S
- Sensing Mode: Hall
- Material: Plastic Shell
- Max Load Capacity: 120kg
- G.W.: 0.5kg
Package Included:
- 1 x Remote controller
- 1 x Control Panel
- 1 x Thermal Baffle
Note: Please not connect motor cables in parallel to make single driver to drive two motors.
Instructions for Changing the Voltage of the Controller:
6S 24V: Connect Point 1, Disconnect Point 2
7S 29.4V: Connect Point 2, Disconnect Point 1
10S 36V: Disconnect Point 1, Disconnect Point 2
Hall Sensor Connection:
3: Black (-) – GND
4: Orange (C) – W
5: White (B) – V
6: Yellow (A) – U
7: Red (+) – 5V
8 & 9: Connect the Switch (No distinction between positive and negative)
10: Switch Indication Light GND (-)
11: Switch Indication Light +
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
