Bond It PU30 30 Minute Rapid Polyurethane Multi Purpose Wood Adhesive Glue 750g

Description:
A one part, solvent‐free, quick setting, moisture curing polyurethane adhesive specially formulated for water‐
resistant bonding and fast setting. D4 water resistance classification to EN204 and EN205

Uses
Bond It PU30 RAPID WOOD ADHESIVE can be used in joinery and
carpentry, for bonding garden furniture, staircases, boats, wooden
constructions, sandwich panels and insulation materials. It has
excellent adhesion to wood, chipboard, laminate, metals,
polyurethane, expanded and extruded polystyrene foams, mineral
wool, concrete, stone, bricks, gypsum boards and all traditional
porous substrates.
The adhesive film has very good flexibility and can resist water
and frost.

Preparation
Ensure all surfaces are clean, dry and free from grease, oil or any
other contaminants that may hinder adhesion.

Application
WEAR PROTECTIVE GLOVES. Remove lid and cut the tip off the
nozzle to an angle of 45°.
Apply the adhesive onto one of the substrates, or to both if the
materials are porous. Assemble the parts immediately and clamp
for at least 3 hours to achieve maximum bond strength.
With the addition of water to one of the surfaces, the adhesive
will slightly expand, filling any irregularities in the substrate.

Setting Time
Bond It PU30 RAPID WOOD ADHESIVE has an open time of
approximately 15 minutes. Setting time will be achieved after 3
hours with final bond strength after 24 hours.

Coverage
120-150g per m2 depending on substrates.

Container Size
750g squeezy bottle.

Colour
Brown liquid.

Shelf Life
12 months from date of manufacture when stored in sealed,
original bottles.

Storage Conditions
Store in cool, dry and well ventilated conditions between 5-25oC.

Disposal of Containers
Do not leave empty containers where residue could be harmful to
children, animals or the environment. Remove any containers to a
central disposal point in accordance with local regulations.

Health & Safety
Please refer to separate material safety data sheet for full
handling, use and storage instructions. Keep out of reach of
children. It is the users responsibility to determine suitability for
use. If in doubt contact our Technical Department for advice.
Note: this information is for general guidance only, since site conditions
and labour are beyond our control. It is recommended that users make
their own tests to determine suitability.

HANDLING INSTRUCTIONS:
WEAR GLOVES/ SKIN COVERING AT ALL TIMES. However, if your
skin comes into contact with PU30 follow these instructions.
Please note in some cases skin turns black. If in any doubt contact
a medical professional, show the packaging and/or the MSDS
available for download from www.bonditgroup.com.

1. Wipe adhesive off with a dry cloth or paper towel. If you just
touched the glue, and it hasn’t yet begun to dry, you should be
able to remove it this way.

2. Wash your hands with soap and cold water. If the adhesive
hasn’t started hardening, you have a chance of washing it off. The
window for this is small so act quickly.

3. Exfoliate. Use a pumice stone or other gritty textured material
(eg. soap with sand in it) to rub at the glue until it comes off. Do
this slowly and patiently. Exfoliating too vigorously can damage or
burn your skin. Alternate between exfoliating and rubbing the
area with your own hand to reduce friction. The glue should begin
to ball up and come off.

4. Avoid acetone (nail varnish remover). Acetone will make the glue stick to your skin as it removes your natural oils. Only consider
acetone if two body parts are stuck together in such a way that
exfoliating is not possible. If this is the case, soak the areas in pure
acetone until the glue dissolves enough to pull the skin apart.
Forcing this process can tear open the skin, so be patient and work
the skin apart slowly.

5. Use a cotton ball dipped in olive oil or vegetable oil to rub off the
last remaining bits. This allows you to scrub a little harder without
tearing your skin open with the exfoliate. The oil will also act as a
moisturiser to your skin.

6. Wash your hands thoroughly. Once you have removed all the
glue, it is important to wash your hands thoroughly with soap and
water to remove any remaining chemical residue.

7. Moisturise. PU5 glue will dry out your skin, coupled with
vigorous exfoliation and hand washing, the natural oils in your skin
will likely be stripped causing mild irritations. Use a good hand
lotion to soothe the area.

Specification Summary
Open Time @ 20oC 15 minutes
Pressing Time @ 20oC 3 hours
Full Cure @ 20oC Approx 24 hours
Density 1.13±0.04 g/cm33
Application Temperature Limits +5 to 35oC
Temperature Resistance -30 to + 100oC
UFI 6590-G0HY-M00W-UDMX

Product Details:
Part of the Bond It Glues & Adhesives Range
Colour: Brown
Code: BDAPU375
Size: 750g
Barcode: 5060021369338

Package Content:
Bond It PU30 30 Minute Rapid Polyurethane Multi Purpose Wood Adhesive Glue 750g