Pro Mate Low Modulus Acetoxy LMA Glazing Silicone Sealant Sealing Doors Windows

Description
A low modulus, acetoxy glazing silicone sealant. Suitable for exterior and interior applications where the
joint movement does not exceed 20% and where the long term durability of silicone is required.
Conforms to EN15651­1,2.

Uses
Bond It PRO­MATE is suitable for sealing around
doors and windows and for general building
maintenance.
It is ideal for use on:
glass to glass
glass to aluminium
glass
ceramics
Most common building materials.

Preparation
Ensure all surfaces are clean, dry and free from
grease or any contaminants that may hinder
adhesion. Cement, concrete and bare metal must
be primed, or a neutral cure silicone such as Bond
It ULTI­MATE or LN7 used. Movement joints should
have a bond breaking backer tape or rod applied.

Application
Apply using a standard sealant gun. Cut tip from
cartridge, be careful not to damage the screw
thread. Cut the nozzle at an angle of 45° and fix to
cartridge. Using a caulking gun apply sealant to the
joint. Tool within 5 minutes using a tooling rod or
wet spatula, for reasons of health and safety do not
tool with finger.

Limitations
Not suitable for use on unprimed metals, cements
or concrete. In areas subject to fungal or mould
growth Bond It MULTI­MATE silicone should be
applied. Joints in which water generates a
hydrostatic pressure through the substrates on the
sealant bond require remedial work before
application. Please note this product is NOT
recommended for bedding in double glazed units.

Container Size
EU3 plastic cartridge.

Colours
PRO­MATE comes in 2 colours: white and
translucent.

Shelf Life
Use within 2 years from date of manufacture.
Store in unopened cartridges.
Storage Conditions
Store in cool, dry conditions.

Disposal of Containers
Do not leave empty containers where residue
could be harmful to children, animals or the
environment. Replace lids and remove any
containers to a central disposal point in
accordance with local regulations.

Health & Safety
Please refer to separate material safety data
sheet for full handling, use and storage
instructions. Keep out of reach of children. It is
the users responsibility to determine suitability
for use. If in doubt contact our Technical
Department for advice.

Note: this information is for general guidance only,
since site conditions and labour are beyond our
control. It is recommended that users make their own
tests to determine suitability

Specification Summary
Skinning Time Less than 10 minutes
Full Cure 24­48 hours depending on conditions and bead
depth
Extensibility Up to 400% at breaking point
Application Temperature +5 to + 30oC
Service Temperature ­40 to + 100oC
Adhesion Good to glass, ceramics, and many
plastics

Container Sizes:
Colour: Transluscent White
Code: BDPMT BDPMWH
Size: EU3 EU3
Barcode: 5060021364869 5060021361936

Package Content
Pro Mate Low Modulus Acetoxy LMA Glazing Silicone Sealant Sealing Doors Windows