Scheda audio stereo wireless MINI 50W Bluetooth 5.0 Amplificatore da 3,5 mm
Description: The potentiometer adjusts the volume, with a switch, to control the volume, very suitable for DIY speakers. If it is a metal box, you need to lead out the Bluetooth antenna. It adopts copper DC connector, which can withstand large current and does not generate heat. Capacitor 470uf35V solid capacitor, to ensure power storage and heat dissipation capacity, stable and continuous power supply is the premise of good sound quality. The DC head wire is sent, which is compatible with the input power interface of this product, even if you do not have a DC head adapter or battery, you can also connect easily. 5.0 Bluetooth version, higher transmission efficiency and longer transmission distance.
Question and answer: 1. How to choose a power supply? The power supply with the board is critical. The higher the voltage, the higher the current and the better the output power. If you only have 12V 1A, you can bring a 3-4 inch speaker. If you are 19V 5A or above, there is no problem with 8-10 inches, and the power supply must be highly valued. If the voltage is too low, the sound will be distorted after the sound is amplified. If the current is too small, the speaker will pull the voltage low, work abnormally or the sound quality will deteriorate. It is recommended to use 18V19V24V power supply with current above 3A. If you only have 9V12V or 1A 2A power supply, it can also be used but the power is small. Please pay attention to the maximum volume when using it, which may affect the sound quality.
2. How to choose a speaker? Commonly used speakers are generally 8 ohms, can not distinguish between positive and negative, the effect is the same, 4 ohm speakers can also be used. If your speaker power is small, it may be used between 10W-30W. The power supply voltage is small to prevent the amplifier from burning out after burning. For example, select a power supply below 15V. If you are a 50W-200w speaker, don't worry about the speaker burnout. You can choose 12-24V power supply. The higher the voltage you choose, the louder the output sound or power.
3. How to connect to Bluetooth? Power on the power amplifier, connect the speaker, turn the audio knob blue light to turn on, turn on the phone settings - Bluetooth - search for "BT-WUZHI", and then click the connection, there will be a beep when the connection is successful, this When it is in Bluetooth mode, you can play music. The next time you power on, it will automatically connect with the phone. 4. When the sound becomes louder, the phenomenon of turbid sound appears. The sound is distorted. Please change the adapter power supply with a higher voltage rating. 5. After the sound becomes louder, the sound is stuck. The input power is insufficient, and the power supply itself is intermittently powered off. Please replace the power supply with a larger power. Or the output power is too large, the power amplifier board is seriously heated, and thermal protection occurs, reducing power usage or enhancing heat dissipation.
Specifications: Name: Mini version 2*50W Bluetooth digital power amplifier board Adaptation power supply voltage: 5-24V Adapted speakers: 30W-200W, 4Ω, 8Ω Channel: left and right dual channels Bluetooth version: 5.0
Package Included:1x Bluetooth digital power amplifier board
Notes: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 0.1-2cm measuring deviation due to manual measurement.
Il 31-mag-2023 alle 02:55:15 CEST, il venditore ha aggiunto le seguenti informazioni sulloggetto:
