DUO 2 in1 Wood PVA Glue Water Resistant D3 Rapid Bond Adhesive 125/500ml/1/5/25L
Description:
A ready to use, PVA timber adhesive which is suitable for use in damp and humid conditions. Meets the
requirements of BS 4701 Creep Resistance standard and EN 204 D3.
Uses
DUO “2 IN 1” WOOD GLUE can be used as a general purpose, joinery
adhesive, or for applications where long term resistance to
moisture is a pre-requisite of the adhesive. Suitable for hard and
soft woods, decorative laminates, chipboard blockwood and other
engineered timber panels. It is also suitable for use with RF
bonding machinery. Not suitable for permanent immersion in
water.
Preparation
Surfaces to be bonded must be clean, dry and free from dust,
grease or contaminants that may hinder adhesion.
Application
Apply the adhesive to one surface only and bring the two surfaces
together within 3-4 minutes and clamp for approximately 1 hour.
After 1 hour careful handling is permissible. Glued components
should be left overnight before machining. Remove excess
adhesive whilst wet using a damp cloth.
When using RF bonding techniques the user must explore the
most efficient combination of glue application, power and dwell
time as each of these varies with different machinery and
constructions.
Limitations
Do not use on surfaces below 5o
C except with RF heating or on
timber with a moisture content of above 12% Timber which in
use will be permanently wet and stressed should be glued with a
thermosetting adhesive.
Container Size
Available in 8 sizes, see reverse.
Colour
White in colour.
Coverage
Surface bonding 70-150g/m2 (1L will cover 6m2-14m2).
Assembly bonding 150-190g/m2 (1L will cover 5m2-6m2).
Shelf Life
12 months from date of manufacture, when stored in original,
unopened containers.
Storage Conditions
Store in cool, dry conditions between a temperature of 5°C and
35°C. Protect from frost and direct sunlight.
Disposal of Containers
Do not leave empty containers where residue could be harmful to
children, animals or the environment. Replace lids and remove
any containers to a central disposal point in accordance with local
regulations.
Any spilt material should be mopped up immediately with an inert
absorbent material, such as sand.
Health & Safety
Please refer to separate material safety data sheet for full
handling, use and storage instructions. Keep out of reach of
children. It is the users responsibility to determine suitability for
use. If in doubt contact our Technical Department for advice.
Note: this information is for general guidance only, since site conditions
and labour are beyond our control. It is recommended that users make
their own tests to determine suitability
Specification Summary
Chemical Composition Aqueous Polyvinyl Acetate Dispersion
Total Solids 50 +/- 1%
Particle Size Range 0.1-2 microns
Specific Gravity @ 25oC 1.10
Appearance White liquid
Solubility in Water Miscible
pH 2.8-3.6
Viscosity @ 25o
C Brookfield RVT spindle 6 20 rpm 9,000 - 15,000 mPas
Minimum Film Forming Temperature 4oC
Shear Strength (wood to wood) 10N/mm2
Full Strength Obtained 24-48 hours after bonding
Product Details:
Code: BDA05
Size: 125/250/500ml/1/2.5/5/25L
Package Content
Wood Glue Duo 2 in 1 Rapid Bond Adhesive D3 Internal External Fast Drying
Available Sizes
125/250/500ml/1/2.5/5/25L
- 1. Any Confuse Or Dissatisfied About Our Products Please Contact Us. Please Do Not Leave Casual Neutral/Negative Feedback.
- 2. Free Postage To UK Mainland, Postage To Any Other Islands & Northern Islands Charges Apply
- 3. Please allow 1-3mm error due to manual measurement.
- 4. Due to the light and screen setting difference, the item's color may be slightly different from the pictures
- 5. We will carefully test every item before shipment. The quality is guaranteed!