1L PC101 BUILDCERT APPROVED INHIBITOR Central Heating High Performance System

Description:
A Build Cert performance, standard inhibitor against formation of scale, rust corrosion, hydrogen gassing, growth
and boiler noise. Helps maintain and improve system efficiency and fuel conservation.

Uses
PC101 INHIBITOR is suitable for all metals including
aluminium. Once added PC101 does not need to be
replaced unless the system is drained down. For best results,
systems should be first cleansed and flushed in accordance
with BS7593:2006.

Application
Filling the system: Open systems should be dosed via the
filling and expansion tank. If system is full, draining at a low
point should be carried out to ensure product enters the
circulatory system. Sealed systems should be filled via filling
loop or a drained radiator.
Dosage: PC101 for optimum efficiency should be dosed
@1.43% of system volume i.e. 1L per 70L of system water.
Generally 1 bottle contains enough chemical for a typical
system with a 14.5Kw Boiler (50,000 Btu/hr) domestic hot
water cylinder and up to 10 radiators. For larger systems an
extra bottle will be required - overdosing will not cause any
problems or detrimental affects to the system.
Please note: where a thermal storage appliance is fitted
allowance must be made for the extra volume of primary
water. The concentration can be checked with a conductivity
meter.

Limitations
DO NOT ADD TO PRIMATIC SYSTEM.

Container Size
1L plastic bottles.

Colour
Straw coloured liquid.

Shelf Life
12 months from date of manufacture when stored in
original, sealed containers.

Storage Conditions
Store in cool, dry conditions in tightly sealed container. Store
above +5o
C and below +30o
C. Do not allow to freeze.

Disposal of Containers
Do not leave empty containers where residue could be
harmful to children, animals or the environment. Replace
lids and remove any containers to a central disposal point in
accordance with local regulations.

Health & Safety
Please refer to separate material safety data sheet for full
handling, use and storage instructions. Keep out of reach of
children. It is the users responsibility to determine
suitability for use. If in doubt contact our Technical
Department for advice.
Note: this information is for general guidance only, since site
conditions and labour are beyond our control. It is recommended
that users make their own tests to determine suitability.

Specification Summary
Flashpoint None
Appearance Straw coloured
Odour Mild aromatic
Specific Gravity 1.04
pH 8

Product Details:
Code: BDPC101
Colour: Straw
Size: 1L
Barcode: 5060021368522

Package Content
1L PC101 BUILDCERT APPROVED INHIBITOR Central Heating High Performance System