Bond It 2.5KG Seal Acrylic Roof Repair Paint Grey Roofing Waterproofed Seal acrylic

Description
A one component, UV stable, solvent‐based, multi‐purpose roof coating membrane. Designed to prevent the ingress of

water whilst allowing any trapped moisture to escape and evaporate naturally. Manufactured with fibre reinforcement pre‐

dispersed in the can for ease of application.



Benefits
Excellent adhesion.

Application in damp weather.

Instant protection.

Superb solar reflectivity.

Reinforced membrane.

One coat application.

Seamless.

Fully flexible.

Unaffected by temperature.

Economical.



Uses
For renovation of all types of roof structure. Provides waterproof

protection of: flat and pitched roofs, corrugated asbestos, roof

lights, flashings, roofing felt, gutters, slate, asphalt, lead,

glasshouses, metal and fibre glass. Will also bridge small gaps and

cracks.



Preparation
All surfaces must be structurally sound, clean,

dry and free from surface contaminants such

as grease, rust and dirt. Clean metals with a

wire brush to remove contamination and to

provide a key. If necessary, remove any

organic growth i.e. moss or lichen, with a

fungicidal wash such as Bond It MOULD STOP.

Make good all cracks, splits, small holes and

flashings and ensure the area to be treated is

free from standing water. SEALACRYL requires no primer on

most surfaces and will tolerate damp surfaces although with any

application for best results apply to a dry surface if possible. Carry

out an adhesion test prior to application to determine if use of a

primer is necessary.



Application
Do not thin. Apply SEALACRYL using either a brush or roller. Treat

all details first, in areas where excessive movement may occur

additional reinforcement can be incorporated into the coating.

SEALACRYL can be applied in one coat, but experience has shown

that a two coat application ensures a greater uniformity of coating

thickness



Drying Time
Normally 24 hours dependant on ambient temperature and

ventilation.



Limitations
Not suitable for use on balconies and walkways. This product

contains solvent and can attack certain materials, if in doubt

please test before use.



Coverage
Average coverage is approximately 1-2Kg per square metre. Thick

coatings may take up to a week to dry. The product may remain

slightly soft for a period of time after application. This will not

affect its waterproofing properties.



Cleaning Of Tools
Clean with Bond It WHITE SPIRIT.



Colour:
Grey



Storage Life
24 months from date of manufacture under good storage

conditions in original unopened containers.



Storage Conditions
Store under cover away from sources of heat and ignition. Store

between 5-20oC. Keep containers sealed when not in use.



Health & Safety
Please refer to separate material safety data sheet for full

handling, use and storage instructions. Keep out of reach of

children. It is the users responsibility to determine suitability for

use. If in doubt contact our Technical Department for advice.



Note
This information is for general guidance only, since site conditions

and labour are beyond our control. It is recommended that users make

their own tests to determine suitability.



Specification Summary
Type of Solvent White Spirit/ pma

Approximate Specific Gravity 1.2

Approximate Coverage Average coverage is approximately 1-2Kg per m2

Service Temperature Limits -10oC to + 85oC depending on operating conditions

Application Temperature Limits Normally 5oC to 25oC

Chemical Resistance Resistant to: most salt solutions, dilute acids and alkalis.

Not resistant to: oils, solvents, some detergent solutions and some glass

cleaning compounds

UFI 4800-D0RS-R005-D73J



Product Details:
Size: 2.5Kg

Code: SA2P5GR

Colour: Grey

Barcode: 5056437401083



Package Content:
Bond It 2.5KG Seal Acryl Roof Repair Paint Roofing Waterproofing Seal acrylic