The DiamondF4 Flight controller and The Mobeetle6 were inspired from Angry Don FPV, we really appreciated for his help to Happymodel and to this hobby. We also very expecting to the performance of this BNF with the new Diamond F4 ELRS flight controller.
Specifications:
Brand Name: Happymodel
Item Name: Mobeetle6 whoop and toothpick 2-IN-1 FPV Racer Drone
Wheelbase: 65mm
Size: 80mm*80mm*30mm
Weight: 17.5g (without battery)
Features:
The lightest 1S Whoop and Toothpick 2-IN-1 fpv drone
Comes with tooth pick frame for convert
Powerful and efficiency
The lightest 1s AIO 5IN1 F4 flight controller
New Unibell SE0702 brushless motors with pcb wire board
Built-in OPENVTX up to 400mw
Low profile Canopy design
Package includes:
Item Name | Qty |
65mm whoop Frame (Mobula6 frame) | 1 |
65mm toothpick frame(Mobeetle6 frame) | 1 |
Option1: DiamondF4 ELRS built-in SPI ELRS receiver | 1 |
SE0702 KV23000 Unibell brushless motor | 4 |
Gemfan 1210 31mm propeller(4cw+4ccw) | 1 |
Runcam Nano3 | 1 |
Built-in 5.8G 48ch 25mw-400mw OPENVTX | 1 |
1s 300mah Lipo battery | 2 |
Mobula6 canopy | 1 |
Propeller disassemble tool | 1 |
Screwdriver | 1 |
Spare parts specifications:
Motor | Mode:SE0702 KV23000 |
Propeller | Weight:0.19g Props Dia:30mm |
Flight controller | (ELRS SPI RX version)DiamondF4 ELRS FC Firmware target: CrazybeeF4SX1280 (Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR |
Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Current: 5A continuous peak 6A (3 seconds) |
Onboard SPI ExpressLRS 2.4GHz Receiver | Packet Rate option: 50Hz/150Hz/250Hz/500Hz |
Onboard Frsky SPI D8 receiver Version | SPI BUS receiver Frsky D8 compatible Channels: 8ch |
Onboard 5.8g OPENVTX | Firmware version: OPENVTX |
Runcam Nano3 | Model: RunCam Nano 3 Image Sensor: 1/3" CMOS Horizontal Resolution: 800TVL Lens : 2.3mm(M6.5) FOV 140° Signal System: NTSC S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: 0.01Lux@1.2F D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V 120mA@3.3V Housing Material: ABS Net Weight: 1.2g Dimensions: L14mm*W14mm*H9mm |
Lipo Battery | Capacity:300mAh Connector: PH2.0 |