Description
MSP430 Programmer Debugger Emulator USB-Debug-Interface MSP-FET430UIF Support JTAG+SBW+BSL
Description:
The MSP-FET430UIF is a powerful flash emulation tool to quickly begin application development on the MSP430 MCU. It includes USB debugging interface used to program and debug the MSP430 in-system through the JTAG interface or the pin saving Spy Bi-Wire (2-wire JTAG) protocol. The flash memory can be erased and programmed in seconds with only a few keystrokes, and since the MSP430 flash is ultra-low power, no external power supply is required.
The debugging tool interfaces the MSP430 to the included integrated software environment and includes code to start your design immediately. The MSP-FET430UIF development tools supports development with all MSP430 FLASH devices, including
Features:
- Support firmware online upgrading.
- Support IAR430, CCS, AQ430, HI-TECH, GCC, TI, and other third-party 5 and 6 series compiler integrated development environment. It enables real-time simulation, debugging, single-step execution, break-point setting, memory content viewing modification, etc.
- Support JTAG, SBWand BSL interfaces.
- Support for WINXP/7/10 32- & 64-bit (Drivers for WIN7, WIN10 need to be installed via universal driver).
Version Introduction:
The emulator firmware is divided into V2 and V3 versions.
The V2 version can only be used with IAR 5.3 and below. It can be automatically upgraded for IAR 5.4 and above. The VCP serial port is displayed in device manager (Please note that the serial port number is not too large between COM1-8. Otherwise IAR can't find it).
The default version is V2. The V2 version is used with IAR 5.3. If your computer is equipped with a pirated system or a GHOST system, then the V3 version of the emulator will not be able to install the driver due to the lack of files. In this case, you need to use universal driver to install it, which is more troublesome, so it is not recommended to upgrade to the V3 version.
The V3 version can only be used with IAR 5.4 and above, and is not compatible with IAR 5.3 and below. It can be downgraded for use with IAR 5.3 and below through third-party software, and the CDC serial port is displayed in the device manager. The emulator firmware is automatically upgraded. Please note that the upgrading time is longer, and IAR will appear suspended during the period. Please be patient. Please not connect it to target board during the upgrading process. Please not switch windows. Please not interrupt or interfere with the entire upgrading process.
Downgrading are available for third-party software. Please pay attention to the precautions which are the same as those of upgrading.
Interface Definition:
JTAG Interface:
SBW Interface:
Internal Circuit:
Package Included:
- 1 x MSP430 Programmer Emulator
- 1 x CD
Note: Please note that the default color is gray white. Thank you for your understanding.
Description:
The MSP-FET430UIF is a powerful flash emulation tool to quickly begin application development on the MSP430 MCU. It includes USB debugging interface used to program and debug the MSP430 in-system through the JTAG interface or the pin saving Spy Bi-Wire (2-wire JTAG) protocol. The flash memory can be erased and programmed in seconds with only a few keystrokes, and since the MSP430 flash is ultra-low power, no external power supply is required.
The debugging tool interfaces the MSP430 to the included integrated software environment and includes code to start your design immediately. The MSP-FET430UIF development tools supports development with all MSP430 FLASH devices, including
Features:
- Support firmware online upgrading.
- Support IAR430, CCS, AQ430, HI-TECH, GCC, TI, and other third-party 5 and 6 series compiler integrated development environment. It enables real-time simulation, debugging, single-step execution, break-point setting, memory content viewing modification, etc.
- Support JTAG, SBWand BSL interfaces.
- Support for WINXP/7/10 32- & 64-bit (Drivers for WIN7, WIN10 need to be installed via universal driver).
Version Introduction:
The emulator firmware is divided into V2 and V3 versions.
The V2 version can only be used with IAR 5.3 and below. It can be automatically upgraded for IAR 5.4 and above. The VCP serial port is displayed in device manager (Please note that the serial port number is not too large between COM1-8. Otherwise IAR can't find it).
The default version is V2. The V2 version is used with IAR 5.3. If your computer is equipped with a pirated system or a GHOST system, then the V3 version of the emulator will not be able to install the driver due to the lack of files. In this case, you need to use universal driver to install it, which is more troublesome, so it is not recommended to upgrade to the V3 version.
The V3 version can only be used with IAR 5.4 and above, and is not compatible with IAR 5.3 and below. It can be downgraded for use with IAR 5.3 and below through third-party software, and the CDC serial port is displayed in the device manager. The emulator firmware is automatically upgraded. Please note that the upgrading time is longer, and IAR will appear suspended during the period. Please be patient. Please not connect it to target board during the upgrading process. Please not switch windows. Please not interrupt or interfere with the entire upgrading process.
Downgrading are available for third-party software. Please pay attention to the precautions which are the same as those of upgrading.
Interface Definition:
JTAG Interface:
SBW Interface:
Internal Circuit:
Package Included:
- 1 x MSP430 Programmer Emulator
- 1 x CD
Note: Please note that the default color is gray white. Thank you for your understanding.
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.