1-10pcs HA6 Silicone Sealant RTV Marine Aquarium Safe Fish Tank Salt Water Seal

 Description:
A high quality, non‐shrinking, marine quality, automotive silicone sealant. Surpasses the requirements of
EN15651‐1,2:2012

Uses
HA6 is unaffected by UV, ozone, salt water immersion and
extremes of temperature and is non-slumping in paste form.
HA6 contains no fungicides or oils which may leach into water and
is therefore recommended for bonding, bedding and sealing glass
in aquarium construction. HA6 is also recommended for the
manufacture of in-situ gaskets and seals for pumps and pipework
to prevent water ingression and as a dust and weatherproofing
seal for cabinets in dirty environments or external applications.
It is ideal for use on: glass; ceramics; anodised aluminium; primed
metals and timber and many plastics.

Preparation
Ensure all surfaces are clean, dry and free from grease, oil or any
other contaminants that may hinder adhesion. Prime porous
surfaces and metals other than anodised aluminium or stainless
steel for optimum adhesion.

Application
Apply using a standard sealant gun with the nozzle cut at an angle
of 45°, and to an opening slightly larger than the joint to be
sealed.
For sealing and bedding apply in the
normal fashion and tool to a smooth
finish one or two minutes after
gunning. As an adhesive bring the two
surfaces together before skinning
commences and do not stress the joint
before the silicone has developed
strength. As a gasket apply to one surface and if the joint is to be
broken allow a strong skin to develop before compressing for
permanent gaskets the joint can be sealed immediately. Clean
away any excess with white spirit.
When using in aquarium assembly please refer to separate sheet
for instructions which can be downloaded from our website.

Limitations
For concrete and cement surfaces Bond It LN7
neutral cure silicone is recommended. Do not use
on surfaces where water can penetrate through
porous materials to the bond interface without
first carrying out remedial work.Not suitable for
use on bitumen, asphalt, natural stone or
unprimed metals. Do not use as a mirror adhesive,
use Bond It MIRROR PRO or GLASS-MATE and do
not apply at temperatures below 5oC or above 30oC.

Colour
HA6 comes in 4 colours: white, translucent, black and grey.

Container Size
310ml plastic cartridge.

Shelf Life
24 months from date of manufacture when stored in original
unopened cartridges.

Storage Conditions
Store in cool, dry conditions at a temperature between 5 and25oC.

Disposal of Containers
Do not leave empty containers where residue could be harmful to
children, animals or the environment. Remove any containers to a
central disposal point in accordance with local regulations.

Health & Safety
Please refer to separate material safety data sheet for full
handling, use and storage instructions. Keep out of reach of
children. It is the users responsibility to determine suitability for
use. If in doubt contact our Technical Department for advice.
Note: this information is for general guidance only, since site conditions
and labour are beyond our control. It is recommended that users make
their own tests to determine suitability.

Specification Summary
Flammability Non-flammable
Tooling Time 5-10 minutes
Tack Free 10-20 minutes
Full Cure 3mm depth per day
Application Temperature +5oC to +30oC

Rubber
Hardness Shore A: <25
Maximum Extensibility 300%
Joint Movement Capability 25% by ISO methods
Service Temperature Limits -60oC to +180oC. Short periods over200o
C are not detrimental to sealant performance

Product Details:
Colour: Black Brown Grey Translucent White
Code: BDHA6BL BDHA6BR BDHA6GR BDHA6T BDHA6WH
Size: 310ml 310ml 310ml 310ml
Barcode: 5060021360045 5060021360052 5060021360069 5060021360076

Package Content
Bond It HA6 RTV Marine Water Fish Tank Grade Silicone Seawater Gasket Sealant UK