Description

A preamp pedal that contains the sound of that amp that became the foundation of modern high-gain sound, bearing the name of a Dutch-born guitarist who laid the foundation for modern technical play styles!
The Mooer Micro Preamp 005 is a mini-sized preamp pedal that captures the sound of that amp that laid the foundation for modern high-gain sound, bearing the name of a Dutch-born guitarist who laid the foundation for modern technical playing styles.
The amp has continued to evolve over the years, and is still highly popular as a standard high-gain amp. The tone of a high-gain amp known for being a signature model, but also used by artists around the world. This is packed into the Mooer Micro Preamp 005.

●Micro Preamp
The Mooer Micro Preamp series is a digital preamp pedal that contains the sound of various vacuum tube amps in a mini size housing. "Intelligent Amplifier Modeling" technology captures the sound, dynamics and response of a real tube amp.

A small housing is packed with functions. It has a 3-band EQ, two selectable channels, and a built-in cabinet simulator. The footswitch can be used not only as an active/bypass switch but also as a channel switch.

The Micro Preamp series pedals can be used not only as an effector, but also connected to the effect return or power amp input to directly drive the power amp of the amp. Furthermore, line recording using a speaker simulator is also possible. You can even output directly to a PA or monitor.

Completely independent dual channel
The Micro Preamp series can select two independent channels. Although the control knob for operation is common, the operation of the knob does not affect between the two channels. Switching channels with the CH/CAB button or footswitch will load the previous setting regardless of the current knob position.
In other words, once you create a sound, it will not be affected even if you switch channels and move the knobs.
The LED color changes when you switch channels, so you can tell at a glance which channel you're on.

●Cabinet simulator
The Micro Preamp series has a built-in speaker simulator that simulates the sound output from the speakers, and can be directly connected to a PA, monitor, audio interface, etc. ON/OFF of the speaker simulator is switched by pressing and holding the CH/CAB button. The LED will flash slowly while the cabinet simulator is ON.

●Control
・VOL: Adjust the volume.
・GAIN: Adjusts the intensity of distortion.
・TRE: Adjusts the output of high frequencies.
・MID: Adjusts the output of the midrange.
・BASS: Adjusts the appearance of low frequencies.
・CH/CAB: Switch channels by pushing. Also, a long press for 2 seconds toggles the cabinet simulator ON/OFF.
・Foot switch: It has two operation modes. Press and hold the footswitch for 2 seconds to switch between operating modes.
Active/Bypass: Pressing the footswitch toggles the preamp between active and bypass. It can be used like a normal effector.
Channel Switching: Switch between two channels by pressing the footswitch. Effective when used as a preamp that is always ON.

● Connection
・DCIN: Connect the center minus DC9V adapter. Current consumption is 220mA.
・INPUT: Connect the instrument cable. When using as a preamplifier, it is also effective to connect a distortion effector etc. in the previous stage.
・OUTPUT: Connect the cable of the amplifier and PA side. Connect to your amp's input, effects return, PA, etc. It is effective to connect spatial effects etc. later.
Main Specifications

Input 1/4 inch mono audio jack (impedance: 1 MΩ)
Output 1/4 inch monaural audio jack (impedance: 100Ω)
Power supply Regulated center negative DC9V adapter (batteries cannot be used)
Current consumption 220mA
Size 93.5mm(D)×42mm(W)×52mm(H)
Weight 160g

Payment

Please pay within 4 days after purchase.

Shipping

Please refer to Shipping and handling.

About other area, please ask me.

Returns

Returns are accepted ONLY if the item was not the item described.

International Buyers - Please Note: 

* Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. 
* Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
* These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.