Gripbond Pro Super Strong Adhesive Hybrid Polymer Sealant Silicone + Mastic Gun

Description:
A one part, high quality, high modulus sealing and bonding material based on advanced hybrid polymer technology. A
totally neutral “hybrid” sealant for use in areas requiring a tough elastic rubber joint or as an adhesive with superior
bonding strength. CE certification: EN 15651‐1: 2012

Benefits:
High modulus, remains permanently flexible.
 For sealing and bonding interior and exterior applications in
all weather conditions.
 Can be overpainted with water based paints.
 Non shrinking.
 Contains no isocyanates, solvents, silicone and phthalates.
 Rapid curing.
 Excellent adhesion to most surfaces (even moist surfaces).
Wet on wet application.
No odour.

Uses
Bond It GRIPBOND PRO can be used:
- For filling and sealing of connecting joints, cracks, holes, etc in
the building sector.
- For bonding metal to metal (can absorb vibration).
- As a universal waterproof construction adhesive for bonding
concrete, mirrors (note: not suitable for plastic backed/safety
mirrors), gypsum board, polycarbonates, polystyrene, PVC, many
plastics, ceramics, copper, lead, zinc, aluminum, stainless steel,
wood and glass.
We recommend that test areas be carried out prior to application
to ensure compatibility of materials
children, animals or the environment.
Remove any containers to a central disposal
point in accordance with local regulations.

Health & Safety
Please refer to separate material safety data
sheet for full handling, use and storage
instructions. Keep out of reach of children. It
is the users responsibility to determine

Specification Summary
Curing in 24 hours 2.5mm
Shrinkage Nil
Skinning Time approx 10 minutes
Hardness Shore A (DIN 53505) 45+/-4
Temperature Resistance
-30oC to +95oC
Application Temperature
+5oC to +40oC
Storage Temperature
+5oC to +25oC

Product Details:
Colour: Black
Code: BDMSPBL
Size: EU3
Barcoode: 5060021364883
Size: 600ml

Paintability: as quality and type of paint can vary, always test
compatibility before use but we only recommend use of
waterbased paints with this product.
Any mirror made with 6mm glass or thicker needs mechanical
fixing. Any mirror on a sloping wall or ceiling must have
mechanical fixings. Any mirror greater than 1m2 must have
mechanical fixings.

Preparation
Ensure all surfaces are clean and free from grease, oil or any other
contaminants that may hinder adhesion.

Application
Carefully cut the top of the cartridge taking care not to damage
the threaded area. Screw on the nozzle supplied and cut at an
angle approximately 45o
. Apply using a standard sealant gun.
As an adhesive: apply in beads or strips and bond the surfaces
together carefully and allow to cure.
As a sealant: apply in a continuous bead along the aperture and
leave to fully cure. Smooth the joint by tooling with a soapy
solution. Remove any excess material and clean tools immediately
with white spirit. Replace plastic cap after use.

Container Size
EU3 plastic cartridge and 600ml aluminum foil sausage

Colour
Available in white, crystal clear, grey and black.

Shelf Life
Clear: Use within 9 months.
Colours: Use within 12 months from date of manufacture.

Storage Conditions
Store in original, unopened cartridge, in a cool, dry place at a
temperature between
+5oC and +30oC.

Disposal of Containers
Do not leave empty containers where residue could be harmful to
suitability for use. If in doubt contact our
Technical Department for advice.
Note: this information is for general guidance
only, since site conditions and labour are beyond
our control. It is recommended that users make
their own tests to determine suitability.

Package Content
Gripbond Pro Super Strong Adhesive Hybrid Polymer Sealant Odourless Silicone New

===================================================================

Silicone Caulk Sealant Applicator Gun 300ml Sink Bath Sealing DIY Builder

PRODUCT DESCRIPTION
An economy extruder gun for use with cartridge products. All guns have an hexagonal drive bar for improved control and an anti-drip release feature.

APPLICATION
Use with all cartridge based silicones, sealants and adhesives.

Feature
New High Quality Trade Silicone Sealant Application Gun
Made by Bond-It – The UK manufactures of numerous Silicone sealants (see our shop)
Holds 310ml Cartridges (The most common size)
Easy Installation & Release of cartridges
Easy Trigger control
All Metal Construction
Ideal For Tradesmen & DIY’ers alike

Package Content
Silicone Caulk Sealant Applicator Gun 300ml Sink Bath Sealing DIY Builder