2x Tubes PU18 Polyurethane Adhesive Sealant High Strength Marine Auto Car Grey
Description:
A one part moisture curing polyurethane adhesive/sealant for the construction and transport industries. PU18 produces tough, elastic seals and joints with excellent adhesion characteristics and resistance to most chemicals. PU18 is also oil resistant making it ideal for the engineering industry. Conforms to BS EN 15651‐1,4:2012.
Uses:
Bond It PU18 can be used for sealing and bonding in engineering, construction, automotive and marine applications.
It is ideal for use on: concrete; wood; metals; GRP; glass; rubbers; and most common building materials.
Preparation:
Ensure all surfaces are clean, dry and free from grease, oil or any other contaminants that may hinder adhesion.
Application:
Puncture seal at the base of the nozzle screw. Apply using a standard sealant gun.
When bonding bring two components together before the product skins.
When using as a sealant tool with detergent solution within 10 minutes.
PU18 is over paintable with water based paints, however, tests should be carried out with solvent based paints to determine suitability.
Limitations:
Do not use for aquarium construction. Do not use with bitumen or asphalt. Not suitable for joints with movement greater than 15%.
Discoloration of Grey shades may occur when exposed to UV.
Colour
PU18 is in Grey Colour
Container Size 310ml metal cartridge.
Shelf Life:
12 months from date of manufacture when stored in original unopened cartridges.
Storage Conditions
Store in cool, dry conditions at a temperature between and 25oC.
Disposal of Containers:
Do not leave empty containers where residue could be harmful to children, animals or the environment. Remove any containers to a central disposal point in accordance with local regulations.
Health & Safety:
Contains isocyanates.
Please refer to separate material safety data sheet for full
handling, use and storage instructions. Keep out of reach of children. It is the users responsibility to determine suitability for use. If in doubt contact our Technical Department for advice.
Note: this information is for general guidance only, since site conditions and labor are beyond our control. It is recommended that users make their own tests to determine suitability.
Specification Summary:
Form Thixotropic paste
Skinning Time @ 20o
C, 65% RH 15 minutes
Thickness polymerised after 24 hours @ 23o
C 50%RH 2-3mm
Application Temperature
+5oC to +35oC
Density 1.2 g/cm3
On a polymerised joint
Shore A Hardness 150 868 - 3 seconds ca 40
Modulus @ 100% (ISO8339) 0.4 N/mm2
Elongation At Break ISO 8339 >500%
Service Temperature Range
-30oC to +80oC
Product Details:
Colour: Grey
Code: BDPU18GR-2PC
Size: 310ml
Barcode: 5060021362414
Package Content:
PU18 Polyurethane Adhesive & Sealant High Strength Marine Window Boat Pond Grey
- 1. Any Confuse Or Dissatisfied About Our Products Please Contact Us. Please Do Not Leave Casual Neutral/Negative Feedback.
- 2. Free Postage To UK Mainland, Postage To Any Other Islands & Northern Islands Charges Apply
- 3. Please allow 1-3mm error due to manual measurement.
- 4. Due to the light and screen setting difference, the item's color may be slightly different from the pictures
- 5. We will carefully test every item before shipment. The quality is guaranteed!