International Buyers – Please Note:
If you need to return the item for some reasons, please contact us via eBay message at the first time to get return address instead of sending back directly without permission,thank you!
This item Locates in Czech Republic, Only Ship to Buyers from Member Country of European Union.
Godiag GT106 24V to 12V Heavy Duty Truck Adapter for X431 for Truck
Converter Heavy Duty Vehicles Diagnosis Support ThinkCar, Thinkcar2,
Thinkdiag
Product Introduction:
Godiag GT106 heavy truck power module converter can convert heavy truck
diagnostic interface from 24v to 12v, used for X431 easydiag 3.0,
easydiag 2.0, Golo Carcare 3, ICARSCAN golo technician box, ThinkCar,
Thinkcar2, Thinkcar pro, Thinkdiag, Thinkdiag mini, Thinkdriver obd2
diagnostic Bluetooth head for truck diagnosis. Godiag GT106 supports any
device as long as the truck software can be added on it.
It helps to convert the truck 24v K-Line communication protocol to 12v
K-Line, so that the launch vehicle equipment can be used, and the launch
12v diagnostic head will not be burned.
Product Function:
1.Convert the 24v voltage of the diagnostic interface of heavy trucks,
light trucks, pickups, etc. into 12v voltage that can be used by
diagnostic equipment.
2.Convert The 24v truck k-line communication protocol into the 12v k-line communication protocol.
3.When inputting 24v voltage, the screen will display the input voltage is 24v, and the switch button pops up.
4.When outputting 12v voltage, the screen will display the output voltage is 24v, and the switch button is pressed down.
5.The communication protocol indicator light shows that when the device
is communicating, and it can display the communication status.
Product Comparison:
| Product Name | Godiag GT106 24v to 12v adapter | Other 24v to 12v adapters |
| Diagnosis port 24v to 12v | √ | √ |
| Input voltage display | √ | × |
| Output voltage display | √ | × |
| 24v K-line protocol to 12v K-line protocol | √ | × |
| Communication protocol indicator | √ | × |
| Power DC interface | √ | × |
Works with the following scanners:
EasyDiag, EasyDiag 3.0, Golo Green Adition, M-DIAG, IDIAG, ICarScan, Diagun, GOLO, DBScar II
Product Features:
1. Our voltage is 12.5v, which is to simulate the real voltage after
starting the vehicle. The similar products are 12v, but the normal car
is about 12.5v after starting.
2.Let the diagnostic software better recognize the ignition voltage of
the vehicle. Because some car models have requirements for the ignition
voltage, and when the 12v decays a little to about 11v, some software
with stricter requirements will alarm or stop the diagnosis.
Supported Trucks or Heavy Duty Vehicles
ABS (HD), ALLISON (HD), BENDIX ABS (HD), BONLUCK (HD), BOSCH (HD),
CATERPILLAR (HD), CHAOCHAI (HD), CHRYSLER (DIESEL) CITROEN (DIESEL),
CTRUCKTY (HD), CTRUCKZY (HD), CUMMINS (HD), DACHAI (HD), DAF (HD), DAYUN
(HD), DEMO (HD), DETROIT (HD), DFL (HD), DongFeng (HD), EATON (HD), FAW
(HD), for FIAT (DIESEL), for FORD (DIESEL), for FOTONAUMAN (HD), FREIGHTLINER (HD),
GM (DIESEL), Great WalI (DIESEL), HALDEX ABS (HD), HIGER (HD), HINO
(HD), HONGYAN (HD), for HUANGHAI (HD), for HYUNDAI (HD), INTERNATIONAL (HD),
for ISUZU (HD), IVECO (HD), JAC (DIESEL), JAC (HD), JAC LIGHT (HD), JMC
(HD), KAMA (HD), KARRY (HD), KARRY TRUCK (HD), KENWORTH (HD), for KINGLONG
(HD), KOBELCO (HD), LAIDONG (HD), MACK (HD), MAN (HD), MAXUS (DIESEL),
MAXXFORCE (HD), for MAZDA (DIESEL), for MERCEDES (HD), for MITSUBISHI (DIESEL),
for MITSUBISHI FUSO (HD), for NISSAN (DIESEL), OBD (HD), for OPEL (DIESEL), PACCAR
(HD), PETERBILT (HD), for PEUGEOT (DIESEL), QUANCHAI (HD), RENAULT (HD),
SCANIA (HD), SCR (HD), SHACMAN (HD), SHANGCHAI (HD), SINOTRUK (HD),
SPRINTER (DIESEL), STERLING (HD), SUNWIN (HD), for TOYOTA (DIESEL), UD (HD),
for VOLVO (HD), For V-W (DIESEL), WABCO ABS (HD), WAW (HD), WEICHAI (HD),
WESTERN STAR (HD), WUZHOULONG (HD),XICHAI (HD), YANGCHAI (HD), YQSH
(HD), YUCHAI (HD), YUNNEI (HD), YUTONG (HD), ZHONGTONG (HD)
Package Includes:
1pc x Godiag GT106 24V to 12V Heavy Duty Truck Adapter
