001-checked.png

Get a strong 2mm thick floor, anything below that is considered a paint coating.

001-checked.png

Perfect for light marble effect floors and metallic epoxy design floor

001-checked.png

White floors ready with good UV resistance for improved performance and longevity.

001-checked.png

Minimise imperfections and coating problems with 3 layer metallic system

001-checked.png

Top Coat PU Clear/Matt/Gloss abrasion protection & good UV Resistance


NEED TO APPLY A FLOOR COATING?

SINDEC Metallic Epoxy Floor Coating system:

1 - SUBSTRATE / SUBFLOOR

Min. compressive strength 25N|mm2 - Dust Free - Must be Level - Crack Free
Moisture below 4%, in case moisture is higher than 4% a DPM must be used

2 - PRIMER COAT
Aqua Shield Primer - 230g per m2

3 - BASE COAT
EP321 - 600-700g per m2 (recommendation, higher if light coloured)

4 - DESIGN COAT
Epoxy T-800 or T-1000 - 1kg per m2

5 - TOP COAT SEALER
Water Based PU CLEAR/SATIN/GLOSS - 200g per m2