1080P HDMI Extender Repeater with IR over RJ45 Cat5e/6 Cables up to 60m HDTV
Detail Information
Overview:
The HDMI network extender replaces the HDMI cable over a CAT5e or CAT6 cable (recommended) and can extend the HDMI signal for 60 meters, reducing costs. As HDMI cables are expensive, it is very difficult to transmit HDMI signals over long distances. The purpose of the extender is to achieve long-distance signal transmission with low-cost wires.
Feature:
1. 1080p 3D, Category 6 cable transmission distance of 60 meters
2. a single six cable instead of HDMI cable to achieve long-distance transmission
3. network cable using standard IEEE-568B Ethernet connection, easy to use
4. support Full HD, 1080P
5. real-time transmission of HDMI high-definition video signal, the video clear and stable
6. support two-way infrared transmission
7. transfer rate bandwidth 10.2Gbps
8. comply with HDMI1.3b standard, HDCP1.2 protocol
9. built-in ESD protection circuit, can effectively prevent static damage
10. on-site installation: simple and convenient, plug and play, no need to set
Specifications:
range of working temperature：-5 to + 35 ° C
Operating humidity range：5 to 90% RH (no condensation)
Input video signal：0.5-1.0 volts p-p
Enter the DDC signal：5 volts p-p (TTL)
Video format support：DTV / HDTV;1080P / 1080i / 720P / 576P / 480P/ 576i / 480i
Output video：HDMI 1.3b
Output audio：Support DTS-HD, Dolby-HD
The maximum transmission distance：1080p Category 6 cable 40 meters
Enter the power：DC 5V, positive and negative inside
Power consumption：Transmitter 2.5W;Receiver 2.5W
Dimensions：82mmH × 46mmW × 24mmD
Note:
EDID copy mode: connect the display to the HDMI input port, then press the key, it'll copy the EDID to the extender;
Reset EDID: press the key for 3 seconds, it'll reset the EDID to 1080P 3D stereo. Here The HDMI port of HDMI TX is connected to the display screen with HDMI cable, and then the board is powered on. After pressing the key for about 3 seconds, the indicator light flashes quickly to learn EDID.
Package Contents:
HDMI transmitter x 1 PCS
HDMI receiver X 1 PCS
IR-TX cable x 1PCS
IR-RX cable x 1PCS
Power adapter 5V / 1A X2PCS
User Manual X 1 PCS
The HDMI network extender replaces the HDMI cable over a CAT5e or CAT6 cable (recommended) and can extend the HDMI signal for 60 meters, reducing costs. As HDMI cables are expensive, it is very difficult to transmit HDMI signals over long distances. The purpose of the extender is to achieve long-distance signal transmission with low-cost wires.
Feature:
1. 1080p 3D, Category 6 cable transmission distance of 60 meters
2. a single six cable instead of HDMI cable to achieve long-distance transmission
3. network cable using standard IEEE-568B Ethernet connection, easy to use
4. support Full HD, 1080P
5. real-time transmission of HDMI high-definition video signal, the video clear and stable
6. support two-way infrared transmission
7. transfer rate bandwidth 10.2Gbps
8. comply with HDMI1.3b standard, HDCP1.2 protocol
9. built-in ESD protection circuit, can effectively prevent static damage
10. on-site installation: simple and convenient, plug and play, no need to set
Specifications:
range of working temperature：-5 to + 35 ° C
Operating humidity range：5 to 90% RH (no condensation)
Input video signal：0.5-1.0 volts p-p
Enter the DDC signal：5 volts p-p (TTL)
Video format support：DTV / HDTV;1080P / 1080i / 720P / 576P / 480P/ 576i / 480i
Output video：HDMI 1.3b
Output audio：Support DTS-HD, Dolby-HD
The maximum transmission distance：1080p Category 6 cable 40 meters
Enter the power：DC 5V, positive and negative inside
Power consumption：Transmitter 2.5W;Receiver 2.5W
Dimensions：82mmH × 46mmW × 24mmD
Note:
EDID copy mode: connect the display to the HDMI input port, then press the key, it'll copy the EDID to the extender;
Reset EDID: press the key for 3 seconds, it'll reset the EDID to 1080P 3D stereo. Here The HDMI port of HDMI TX is connected to the display screen with HDMI cable, and then the board is powered on. After pressing the key for about 3 seconds, the indicator light flashes quickly to learn EDID.
Package Contents:
HDMI transmitter x 1 PCS
HDMI receiver X 1 PCS
IR-TX cable x 1PCS
IR-RX cable x 1PCS
Power adapter 5V / 1A X2PCS
User Manual X 1 PCS
1080P HDMI Extender Repeater with IR over RJ45 Cat5e/6 Cables up to 60m HDTV
Product Overview
Detail Information
Overview:
The HDMI network extender replaces the HDMI cable over a CAT5e or CAT6 cable (recommended) and can extend the HDMI signal for 60 meters, reducing costs. As HDMI cables are expensive, it is very difficult to transmit HDMI signals over long distances. The purpose of the extender is to achieve long-distance signal transmission with low-cost wires.
Feature:
1. 1080p 3D, Category 6 cable transmission distance of 60 meters
2. a single six cable instead of HDMI cable to achieve long-distance transmission
3. network cable using standard IEEE-568B Ethernet connection, easy to use
4. support Full HD, 1080P
5. real-time transmission of HDMI high-definition video signal, the video clear and stable
6. support two-way infrared transmission
7. transfer rate bandwidth 10.2Gbps
8. comply with HDMI1.3b standard, HDCP1.2 protocol
9. built-in ESD protection circuit, can effectively prevent static damage
10. on-site installation: simple and convenient, plug and play, no need to set
Specifications:
range of working temperature：-5 to + 35 ° C
Operating humidity range：5 to 90% RH (no condensation)
Input video signal：0.5-1.0 volts p-p
Enter the DDC signal：5 volts p-p (TTL)
Video format support：DTV / HDTV;1080P / 1080i / 720P / 576P / 480P/ 576i / 480i
Output video：HDMI 1.3b
Output audio：Support DTS-HD, Dolby-HD
The maximum transmission distance：1080p Category 6 cable 40 meters
Enter the power：DC 5V, positive and negative inside
Power consumption：Transmitter 2.5W;Receiver 2.5W
Dimensions：82mmH × 46mmW × 24mmD
Note:
EDID copy mode: connect the display to the HDMI input port, then press the key, it'll copy the EDID to the extender;
Reset EDID: press the key for 3 seconds, it'll reset the EDID to 1080P 3D stereo. Here The HDMI port of HDMI TX is connected to the display screen with HDMI cable, and then the board is powered on. After pressing the key for about 3 seconds, the indicator light flashes quickly to learn EDID.
Package Contents:
HDMI transmitter x 1 PCS
HDMI receiver X 1 PCS
IR-TX cable x 1PCS
IR-RX cable x 1PCS
Power adapter 5V / 1A X2PCS
User Manual X 1 PCS
The HDMI network extender replaces the HDMI cable over a CAT5e or CAT6 cable (recommended) and can extend the HDMI signal for 60 meters, reducing costs. As HDMI cables are expensive, it is very difficult to transmit HDMI signals over long distances. The purpose of the extender is to achieve long-distance signal transmission with low-cost wires.
Feature:
1. 1080p 3D, Category 6 cable transmission distance of 60 meters
2. a single six cable instead of HDMI cable to achieve long-distance transmission
3. network cable using standard IEEE-568B Ethernet connection, easy to use
4. support Full HD, 1080P
5. real-time transmission of HDMI high-definition video signal, the video clear and stable
6. support two-way infrared transmission
7. transfer rate bandwidth 10.2Gbps
8. comply with HDMI1.3b standard, HDCP1.2 protocol
9. built-in ESD protection circuit, can effectively prevent static damage
10. on-site installation: simple and convenient, plug and play, no need to set
Specifications:
range of working temperature：-5 to + 35 ° C
Operating humidity range：5 to 90% RH (no condensation)
Input video signal：0.5-1.0 volts p-p
Enter the DDC signal：5 volts p-p (TTL)
Video format support：DTV / HDTV;1080P / 1080i / 720P / 576P / 480P/ 576i / 480i
Output video：HDMI 1.3b
Output audio：Support DTS-HD, Dolby-HD
The maximum transmission distance：1080p Category 6 cable 40 meters
Enter the power：DC 5V, positive and negative inside
Power consumption：Transmitter 2.5W;Receiver 2.5W
Dimensions：82mmH × 46mmW × 24mmD
Note:
EDID copy mode: connect the display to the HDMI input port, then press the key, it'll copy the EDID to the extender;
Reset EDID: press the key for 3 seconds, it'll reset the EDID to 1080P 3D stereo. Here The HDMI port of HDMI TX is connected to the display screen with HDMI cable, and then the board is powered on. After pressing the key for about 3 seconds, the indicator light flashes quickly to learn EDID.
Package Contents:
HDMI transmitter x 1 PCS
HDMI receiver X 1 PCS
IR-TX cable x 1PCS
IR-RX cable x 1PCS
Power adapter 5V / 1A X2PCS
User Manual X 1 PCS
On 26-Jul-2023 at 13:38:02 BST, seller added the following information: