eBay

Product Details

Overhaul Engine Rebuild Kit Fit 02-03 Dodge Ram 1500 Jeep Liberty 3.7. Designed using state-of-the-art technology and with customers in mind. This product is made of high-quality materials to serve you for years to come. It will meet your needs and deliver great quality at an affordable cost. Replace Part #: 5019316AA

Fits Following Models:
2002-2003 DODGE RAM 1500 3.7L 226CID V6 SOHC, (12 VALVE), VIN CODE "K" - JTEC DESIGN
2002-2003 JEEP LIBERTY 3.7L 226CID V6 SOHC, (12 VALVE), VIN CODE "K" - JTEC DESIGN

This item includes:

Full Gasket Set (Multiple Layers Steel (MLS) Head Gasket, Valve Cover Gasket, Valve Stem Seals, Intake Manifold Gasket, ..., Other Small Gaskets, RTV Silicone)
24 Cylinder Head Bolts (16 Long Bolts, 8 Short Bolts)
6 Pistons with Complete Ring Set (Sizes available: see option above)

Standard Bore Diameter: 93.00mm
1st Group: 1.50mm
2nd Group: 1.50mm
Oil Ring: 3.00mm

6 Piston Wrist Pins
12 Cir Clips
Main Bearing Set (Sizes available: see option above)
Rod Bearing Set (Sizes available: see option above)
Thrust Washer
1 Timing Chain Lower (primary 70 links)
2 Timing Chain (cam drive 94 links)
2 Tensioner (left & right)
1 Guide Rail Right (right chain fixed rail)
1 Guide Rail Left (left chain fixed rail)
2 Guide Rail (left & right tensioner rail)
1 Cam Sprocket Right (26 teeth has reluctor ring)
1 Cam Sprocket Left ( 26 teeth - JTEC power control module)
1 Crank Sprocket (25 teeth)
1 Idler Sprocket (primary 50 teeth)
Idler Sprocket & Blance Shaft Gears - are not included
Water Pump w/ Gasket
Oil Pump
12 Lifters / Lash Adjusters

Remark: If you want the oversize(s), please leave us a note in the "Add Message to Seller" box that eBay provided when you go to check out. Click the SAVE button in order for your note to be saved, and double check to make sure your note is lodged with your payment. For other oversizes please contact us for special order.

Piston Measurements

Piston Part #

UOM

STD

0.25

0.50

0.75

1.00

PS5037

93.000

93.250

93.500

93.750

94.000

3.661

3.671

3.681

3.691

3.701

Piston Ring Part#

Piston Information

RS5037

Specifications

Cylinder

Bore

93.000

3.661

Comp

31.800

1.252

Dist.	1
	2
	3

Length

53.900

2.122

Surface Treatment		Cir Clip
Head	Skirt
NONE	Moly Skirt
Remarks
Measure for CYL clearance	MM	IN	From Bottom of the Skirt
Measure for CYL clearance	13.000	0.512	From Bottom of the Skirt

Pin Length

59.000

2.323

Pin Diameter

24.022

0.946

1st

1.500

0.059

2nd

1.500

0.059

Oil Ring

3.000

0.118

CAUTION!!: Bore diameter is measured before skirt Surface Treatment. To Determine "Bore" to Diameter, add wall clearance of +0.04mm (0.00157") to maximum Bore Size.

Warranty

Warranty & Exchange

Mizumo Auto offers a Limited Warranty to entire products to be free from defects in workmanship and material under a normal service conditions for a period of 90 days whichever occurs form the original date of purchase.

The warranty is not transferable, is valid to original purchaser, and limited to the replacement of defective product only.

This Limited Warranty does not cover labor, damaged from accidents, alterations, misuse or modifications not intended by the manufacture, and other expenses such as towing loading fluids, oils or car rentals.

All warranty clams must be pre-authorized and returned prepaid to Mizumo Auto for inspection and approval.

No exchanges will be made for any product that has been damaged, misused or improper installed. We always recommend professional installation of our products.

The buyer assumes risk of damage caused by improper installation.