350W 24/36V Electric Mountain Bike Drive Motor Conversion Set Left Chain Drives
 
 
 
350W 24V/36V Electric Conversion Kit Left Chain Drive For Common Bike Custom USA
Important NOTE:

This item is for the bike that uses the hub diameter less than 36mm.

This item doesn't include battery or charger.

This is our newest kit for electric common bike, this kit mounts the sprocket on the wheel spokes, so it fits most of bicycle wheel.

Motor use freewheel so when wheel rotating, the motor will not rotate, just like a normal bike, this can reduce resistance.

The twist/thumb throttle kit includes:

1. 1x brush motor with freewheel

2. 1x Chain

3. 1x Customized sprocket & components

4. 1x Motor controller

5. 1x Mounting plate + bolts

6. 1x Twist throttle /thumb throttle(with battery indicator & key switch)
 
Note: During installation, the two transmission wheels need to be adjusted to a straight line. The deviation of flywheel angle will tilt the flywheel stress point to one side, causing flywheel damage. The flywheel angle is generally adjusted through the mounting bracket of the motor.
During installation, it is necessary to adjust the angle to ensure that the front and rear wheels are in a straight line. If the angle is not correct, it can be adjusted by adding or removing shims under the mounting plate at the axle position. If the front and rear wheels are not in a straight line, the chain will tilt to one side. This causes the force to tilt to one side all the time when the flywheel rotates, making it easy for the flywheel to be damaged.

 
 
 
 
 
 
 
 
 
 
 
 
PushAuction
 

 


On 05-Sep-2023 at 08:39:50 BST, seller added the following information:

 

DataCaciques

 


On 07-Nov-2023 at 02:38:08 GMT, seller added the following information:

 

DataCaciques


On 02-Jan-2024 at 04:10:46 GMT, seller added the following information:

DataCaciques