Key Point

☞ Bills go in automatically!

☞ When you press the password, the handle automatically rotates and opens!

☞ You can set your own password!

Password Settings

☞ Initial password : 0000

1. Open the door.

2. While pressing the * button, enter the 4-digit password, then press the # button.

3. Close the door.

Function

☞ Auto rotation : When you enter the password, the lock is unlocked, and the safe door opens with a soudnd effect as the handle rotates automatically.

☞ Burglar alarm working : When the burglar alarm is activated, the Pokemon theme song plays when the safe is lifted. (It is released by pressing the button once.)

☞ Counterfeit money detection : When the switch is pressed, the first lamp lights up, and at this time, it is possible to identify counterfeit bills by shining the bill on the light.

Cautions

☞ If the safe door is not closed after opening, the red ight will turn on every 15 seconds and an alarm will sound. (Please close the door.)

☞ When the batteries are replaced, the password is automatically reset to 0000.

☞ Please note that putting paper other than bills into the bill slot may cause a malfunction. If the battery is weak and the bill gets stuck in the middle while inserting the bill, replace it with a new battery and the bill will be inserted automatically, so do not forcefully remove it.

☞ If the batteries are weak, you may hear a sound but the door may not open. Replace the batteries.