Note:
Our machines are constantly improving. The actual received accessories will be slightly different from the pictures on our web pages. The accessories we send can guarantee the normal use of boring machine. Please refer to the actual product when you receive the accessories. If you have any questions, you can contact us at any time. |
|
|
1.By adopting 220V continuous current motor with characteristics of low-speed of revolution and high torque, the complete machine can realize stationary machining in superior performance.
2.Feeding and processing can realize electrodeless speed regulation. Feeding process can be set according to demands, and processing can automatically stop after reaching the limit switch.
3.Boring bar adopting high-strength alloy and structural steel is featured with high hardness, high accuracy, high tenacity, good abrasion resistance, etc.
4.The boring bar can be disassembled separately to make installation convenient.
5.The control cabinet is installed below the main engine to be beneficial to safety operation.
6.Electric motor controller is equipped with dynamic delay brake program to avoid vibration in shutdown.
Main Technical Parameters:
The maximum processing hole diameter: Ф260mm
The minimum processing hole diameter: Ф55mm
The maximum processing travel: 380mm
The maximum feed depth: 2mm on one side (A3 steel)
Surface roughness: Ra3.2
Deviation from circular form≤0.02mm
Gross weight of equipment: 95.65KG
Rotate speed: 0-83RPM
Boring bar: 50*1500MM
1. Supporting seat A
2. Boring bar
3. Supporting seat B
4. Rack
5. DC motor
6. Emergency stop switch
Equipment Maintenance In order to ensure the use of hole drilling machine for engineering machinery become more convenient and rapid and every component can work smoothly, regular cleaning and maintenance have to be done to hole drilling machine.
Slushing oil should be painted to boring bar and feed screw which are not used very often.
Appropriate grease oil should be added to the feed box every half a year.
Spindle box and feed box should be stored by sealing if these parts are not used for a long time.
Appropriate grease oil should be added to guide post and screw before processing.
Boring bar should be hanged for hoisting to avoid deformation when it is not processed.
It has many advantages, such as small size, light weight, easy to carry, good welding quality, and has less demanding on the environment and the use of space.
It is widely used in large-scale equipment, pin hole construction machinery, such as the hole in the bearing bore welding repair, a short distance of the longitudinal seam weld.
In short, the portable automatic bore welding is an essential tool for the mining industry and the maintenance of the project site.
Specification:
Operating Voltage:AC 220V/60hz
Maximum Power:100W
Total Weight:23.5KG
Spindle Speed:CVT 0--40r/min
Welding Range:Φ55-220mm
Axial Travel:0-280mm
Wire Diameter:1.0mm
Welding machine: European connector
Note:
This machine needs to be used with a boring machine.
If you are not a boring machine purchased from our company, please pay attention to the supporting dimensions of the boring machine.
Work Environment:
Ambient Temperature:-10℃~+55℃
Storage temperature:-25℃~+70℃
Relative humidity:≤85%
Direction: