Bond It 1 Litre  Proofer & Hardener Concentrate Power Proof Cement 1L

Description:
A premium quality, concentrate additive that increases frost resistance and accelerates the setting time of
cements by improving the rate of hydration. 5 x stronger than standard formulation. Conforms to EN934‐2:2009.

Benefits:
w Developed for brick laying and rendering subjected to low and
sub‐zero temperatures.
w Increases rate of curing of mortar to reduce the possibility of
cracking caused by frost.
w Chloride‐free formulation.
w Non‐corrosive.
w Will not degrade steel wall ties, reinforcements
and other steel items.
w Works by exothermic reaction.

Uses
To facilitate all year round construction where low, ambient
temperature may normally cause a lull in the rate of production.
Bond It POWER-FROST increases the rate of hydration, accelerating
the rate of cure as well as allowing a reduction in the total volume
of gauging water required, therefore, improving the frost
resistance of the mortar/concrete.
Due to the final mortar/concrete being more dense the final result
is an improved oil and water resistant product. When mixed neat
with Portland cement it can be used to plug holes caused by
pressure leaks.
Added to the mix POWER-PROOF will improve workability and
increase strength gain and resistance to water penetration. It
allows up to 15% reduction in gauging water, and can also reduce
curing times and shrinkage.

Application
SHAKE WELL BEFORE USE. Add POWER-PROOF to gauging water at
a rate of 500ml (half a bottle) per 25Kg of cement.
After laying of the mortar/concrete take usual precautions for
protection against climatic conditions. For plugging pressure leaks
mix neat with ordinary Portland cement to a putty like consistency
before pressing into the hole immediately as this will begin to cure
within 2 to 5 minutes of mixing under normal conditions.

Limitations
For use below 4°C hot water is recommended. Do not use if
temperature is 2o
C and falling.

Coverage
500ml POWER-PROOF for every 25Kgs of cement.
Container Size
1L plastic bottle.

Shelf Life
2 years from date of manufacture when stored in sealed bottles.

Storage Conditions
Store in cool, dry conditions in sealed bottles. Protect from frost.
Disposal of Containers
Do not leave empty containers where residue could be harmful to
children, animals or the environment. Remove any containers to a
central disposal point in accordance with local regulations.

Health & Safety
Please refer to separate material safety data sheet for full
handling, use and storage instructions. Keep out of reach of
children. It is the users responsibility to determine suitability for
use. If in doubt contact our Technical Department for advice.
Note: this information is for general guidance only, since site conditions
and labour are beyond our control. It is recommended that users make
their own tests to determine suitability.

Specification Summary
Appearance Pale blue liquid
Flammability Non-flammable
pH 7-9
Solubility in water Soluble

Product Details:
Code: POWP1
Size: 1L


Package Content:
Bond It 1 Litre  Proofer & Hardener Concentrate Power Proof Cement