50g Bond It HVC16 Super Glue High Viscosity Cyanoacrylate Adhesive Strong Bottle

Description:
A high viscosity ethyl cyanoacrylate adhesive with gap filling properties.
HVC16 combines high tensile strength with improved impact
resistance resulting in a toughened bond. HVC16 higher viscosity
enables it to be used on porous and vertical surfaces without
excessive penetration or running.

Uses
The high viscosity is particularly suitable for use with foam
products. Bond It HVC16 SUPERGLUE can be used for bonding:
PVC
trims.
Rubbers.
Timbers.
Many plastics.

Preparation
Surfaces to be bonded must be clean, dry and free from dust,
grease, oil or any other contaminants that may hinder adhesion.

Application
HVC16 permits readjustment of components before bonding
commences.
Apply a thin film to one side only and bring together immediately.
Reposition within 2-3 seconds. Maintain light pressure without
movement of joint for at least 10 seconds, do not handle until
bonding time stated above has expired. Clamp or hold for a few
seconds.
As the polymerisation of cyanoacrylates is initiated by moisture
from the atmosphere best results will be obtained if the relative
humidity is in excess of 50%. Higher levels of humidity reduce the
opportunity for monomer evaporation thus limiting fume build up.
If bonding is continuous process good ventilation must be
ensured.

Limitations
Not suitable for permanent glass bonding. Oily or greasy surfaces
cannot be bonded. Olefinic or fluro polymers may require
specialised bonding techniques.

Container Size
Available in 50g and 20g plastic bottles.

Shelf Life
6 months from date of manufacture when stored in unopened
bottles.

Storage Conditions
Store in a closed upright container between 3 and 20°C in dry dark
conditions. At low temperatures the shelf life will be prolonged.

Disposal of Containers
Do not leave empty containers where residue could be harmful to
children, animals or the environment. Replace lids and remove
any containers to a central disposal point in accordance with local
regulations.

Health & Safety
Cyanoacrylate.
Danger.
Bonds skin and eyes in seconds.
Please refer to separate material safety data sheet for full
handling, use and storage instructions. Keep out of reach of
children. It is the users responsibility to determine suitability for
use. If in doubt contact our Technical Department for advice.
Note: this information is for general guidance only, since site conditions
and labour are beyond our control. It is recommended that users make
their own tests to determine suitability.

Specification Summary
Chemical Composition Ethyl Cyanoacrylate
Flash Point >85oC
Flammability Capable of combustion
Boiling Point >150oC
Solubility in Water Polymerises
Grab Very high initial grab
Appearance Colourless liquid of medium viscosity
Viscosity 1000-1500 mPa.s
Specific Gravity 1.05 g/ml

CURED ADHESIVE
Service Temperature Range + 55 to 80°C
UFI 7E00-E04V-W001-Q315
Cure speed and adhesive property info available on request from our
technical department.

Product Details:
Colour: Clear
Code: HVC1650
Size: 50g
Barcode: 5060021361097

Package Content
50g Bond It HVC16 Super Glue High Viscosity Cyanoacrylate Adhesive Strong Bottle


Available Packs:

1,2,3,4,5,6,8 & 10