PRIMUS 1020 991 992 filler cap with Pressure gauge Lantern and Stove

Description


We have a shop in Japan and have sold many products!


About This Items

  1. This is a filler cap with air gauge for the following burners and lanterns common to Optimus, Radius, and Primus.
  2. The window is made of glass for high visibility.
  3. The size is 33mm.
  4. It is one size larger than the ones you can find on ebay or other shopping sites, and has a well-balanced and high-class feeling.
  5. It also has a PSI display, which is the same as that of bicycle and motorcycle air gauges, and a Kg/㎠ display, which is also used in Europe and the U.S. It has two types of displays.
  6. The accuracy is also one rank higher.
  7. The air gauge uses the Bourdon tube method, and as shown in the image, the piping is thick and solid.
  8. As a result, the weight is about 10 g heavier than other models, and the difference is immediately apparent when you hold it in your hand.

Condition

  1.  New.

Compatible models
PRIMUS   1020,1320,1321,991,992
OPTIMUS 111,930,535
RADIUS   119,R10,48
※Optimus 930 may not fit depending on the age.
   Please refer to the separate image.
  1. It is an external product.
  2. Proper gauge pressure is in the following range: 1-3 kg/㎠ 14PSI-40PSI
  3. 1-3 kg/㎠ 14PSI-40PSI

  1. Accuracy: FS±2.5%.
  2. Manometer Specifications
  3. SizeTable diameter: 33mm

  1. Case & Bezel Material： Stainless steel

  1. Lens Material： Glass

  1. Lens Material： Glass ◇Pressure gauge

  1. Accuracy (%): FS ± 2.5
  2. Pressure range: 0 to 0.4 MPa (0 to 4 kg/cm2)
  3. Ambient Operation Temp.(F): 5 to 60°C
  4. O-Ring Material: Viton
  5. Size 33mm

  1. Weight 40g

    ■Unit
    1. 0.1 Mpa=1.02 kg/cm2（kilogram per square centimeter)
    2. 10 PSI=0.7 kg/cm2
    3. 1 BAR=1.02 kg/cm2
    4. 1 BAR=14.50 PSI
    5. 1 BAR=100 Kpa (kilopascal)
    6. 1 atm=1.03 kg/cm2
    7. PSI: (Psi/lb/square inch: 1 weight pound per square inch)
    8. BAR:(bar)

      ※Caution
      1. Do not use the pressure gauge for any purpose other than for lantern burners.
      2. *When removing the pressure gauge, remove it while slowly releasing air.
      3. *Do not apply pressure higher than the maximum pressure (pressure on the maximum scale).
      4. Do not apply excessive pressure, vibration, or shock.
      5. *Use the product within the normal temperature range.
      6. Please do not return or exchange the product due to minor scratches, scuffs, etc.
      7. Please refrain from purchasing if you are concerned about it.