"1951 TRAXXAS
Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal U-joints (4)" "Long half shaft set includes two external and two internal-splined shafts and four metal crosses
Replacement part for these models:
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Ford® F-150 Raptor
Nitro Rustler®
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash
Stampede® VXL
Stampede®"
1953 TRAXXAS Half shaft pro-pack (internal-splined (6)/ external-splined (6) (plastic shafts only) "Half shaft pro-pack includes six internal and six external-splined half shafts.
Replacement part for these models:
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Ford® F-150 Raptor
Nitro Rustler®
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash
Stampede® VXL
Stampede®"
"2062 TRAXXAS
Gear set (for 2060 sub-micro servo)" Gear set for 2060 sub-micro servo
2064 TRAXXAS Traxxas – 2064 Set ingranaggi Sub-Micro Cod TRX2064 "Set di ingranaggi (per servo sub-micro impermeabile 2065)
PARTE DI RICAMBIO PER QUESTI MODELLI:
1-1/18 LaTrax® Desert Prerunner
1/18 LaTrax® Desert Prerunner2 1/18 LaTrax® Desert Prerunner (Modello # 76064-5)
3 1/18 LaTrax® Rally
1/18 LaTrax® Rally4 1/18 LaTrax® Rally (Modello # 75054-5)
1/18 LaTrax® Rally VR46
1/18 LaTrax® Rally VR465 1/18 LaTrax® Rally VR46 (Modello # 75064-5)
1/18 LaTrax® Teton
1/18 LaTrax® Teton6 1/18 LaTrax® Teton (Modello # 76054-1)
7 1/18 LaTrax® Teton (Modello # 76054-5)
Vertice
Giacca sportiva Chevrolet TRX-4® 1979
Giacca sportiva Chevrolet TRX-4® 1979: radio TQi Traxxas abilitata per collegamento a 2,4 GHz (modello n. 82076-4)
TRX-4® Ford Bronco
TRX-4® Ford BroncoTRX-4® Ford Bronco: radio TQi Traxxas Link abilitata a 2,4 GHz (Modello n. 82046-4)
TRX-4® Mercedes-Benz® G 500® 4X4²
TRX-4® Mercedes-Benz® G 500® 4X4²TRX-4® Mercedes-Benz® G 500® 4X4²: radio TQi Traxxas abilitata per collegamento a 2,4 GHz (modello n. 82096-4)
Cingolo TRX-4® Scale and Trail ™
Cingolo TRX-4® Scale and Trail ™Crawler TRX-4® Scale and Trail ™: radio TQi Traxxas Link abilitata a 2,4 GHz (Modello n. 82056-4)
Kit non assemblato TRX-4®
Kit non assemblato TRX-4®Kit non assemblato TRX-4®: radio TQi Traxxas Link abilitata a 2,4 GHz (modello n. 82016-4)
TRX-6 ™ Mercedes-Benz® G 63® AMG 6X6
TRX-6 ™ Mercedes-Benz® G 63® AMG 6X6TRX-6 ™ Mercedes-Benz® G 63® AMG 6X6: radio TQi Traxxas abilitata per collegamento 2.4GHz (Modello # 88096-4)
PARTE ACCESSORIA PER QUESTI MODELLI:
Kit smontato per lo sport TRX-4®
Kit smontato per lo sport TRX-4®1 TRX-4® Sport Unassembled Kit (Modello # 82010-4)
TRX-4® Sport
TRX-4® Sport2 TRX-4® Sport: Radio TQ 2.4 GHz (Modello # 82024-4)
TRX-4® con All-Terrain Traxx ™
TRX-4® con All-Terrain Traxx ™: Radio TQ 2.4 GHz (Modello # 82034-4)"
2082 TRAXXAS Gear set (for 2080 waterproof micro servo) Replacement gear set for standard 2080 micro servo. Does not fit 2080A or 2080X servos.
2581 TRAXXAS Screws, 3x25mm button-head machine (hex drive) (6) "3x25 mm button-head machine screws with hex drive heads. Set of six.
Replacement part for these models:
E-Revo® VXL Brushless
Maxx®
Revo®
Slayer® Pro 4X4
Sledge®
Summit
TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™
TRX-4® 1979 Chevrolet® Blazer®
TRX-4® 1979 Ford® Bronco®
TRX-4® Chevrolet® K10 High Trail Edition™
TRX-4® Equipped with Traxx®
TRX-4® Ford® Bronco®
TRX-4® Ford® F-150® High Trail Edition™
TRX-4® Land Rover® Defender®
TRX-4® Sport High Trail Edition™
TRX-4® Sport Unassembled Kit
TRX-4® Sport
TRX-4® Unassembled Kit
TRX-6® Mercedes-Benz® G 63® AMG 6X6
TRX-6® Ultimate RC Hauler
Unlimited Desert Racer®
X-Maxx®
XRT®"
2728 TRAXXAS Ball bearings (5x8x2.5mm) (2) "Steel ball bearings deliver more speed and increase the life of moving parts by reducing friction. Bearings also last longer and require less maintenance than bushings.
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Chevrolet® Corvette® Stingray
Drag Slash 1967 Chevrolet® C10 Truck
Drag Slash Ford® Mustang® 5.0
Factory Five '33 Hot Rod Coupe
Factory Five '35 Hot Rod Truck
Ford Fiesta® ST Rally
Ford® F-150® Raptor R™ 4X4
Ford® Fiesta® ST Rally
Ford® GT
Ford® Mustang GT®
Maxx®
Nitro Rustler®
Slash 4X4 VXL
Slash 4X4
Slash® 4X4 Brushless
Toyota® GR Supra GT4®
XO-1®
Accessory part for these models:
Bandit® VXL
Bigfoot® Officially Licensed Replica
Ford Fiesta® ST Rally
Nitro Rustler®
Nitro Slash
TRX® 2.5R
TRX® 3.3
TRX® Pro .15
XO-1®"
"2743 TRAXXAS
Set (grub) screws, 3mm hardened (12)" "Set of twelve 3 mm hardened steel grub screws
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
Bandit®
DCB M41 Widebody
Drag Slash 1967 Chevrolet® C10 Truck
Drag Slash Ford® Mustang® 5.0
Ford Fiesta® ST Rally
Ford® F-150 Raptor
Ford® F-150® Raptor R™ 4X4
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Nitro Slash
Revo®
Rustler® 4X4 Brushless
Rustler® 4X4 VXL
Rustler® 4X4
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Slash VXL
Slash
Slash® 4X4 Brushless
Slash® 4X4 Ultimate
Slash® 4X4 VXL
Slash® VXL
Slash®
Slayer® Pro 4X4
Stampede® 4X4 Brushless
Stampede® 4X4 VXL
Stampede® 4X4
Stampede® VXL
Summit
T-Maxx®
X-Maxx®
XRT®"
3184 TRAXXAS Spring, throttle (3) "Set of three springs for throttle, brake, or shift linkages
Replacement part for these models:
Nitro Rustler®
Nitro Slash
T-Maxx®"
"3195 TRAXXAS
Top drive gear, steel (22-tooth)" "Replacement 22-tooth steel top drive gear for standard Magnum 272 transmission
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Ford® F-150 Raptor
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash
Slash®
Stampede® VXL
Stampede®"
"3235 TRAXXAS
G-spring retainers (wrist pin keepers) (3)" "Set of three G-spring retainers (wrist pin keepers) for connecting rods
Replacement part for these models:
TRX® Pro .15"
3621 TRAXXAS Bumper, front / bumper mount, front / 4x23mm RM (2)/ 3x10mm RST (2) (black) "Black front bumper and bumper mount. Includes 4x23 mm screws (2) and 3x10 mm screws (2).
Replacement part for these models:
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica"
3623 TRAXXAS Skid plates, front & rear (black) "Black front and rear skid plates for Traxxas 2WD Stampede models.
Replacement part for these models:
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Stampede® VXL
Stampede®"
"3631 TRAXXAS
Suspension arms (front) (2)" "Black front suspension arms (L&R)
Replacement part for these models:
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Ford® F-150 Raptor
Nitro Slash
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Slash® VXL
Slash®
Stampede® VXL
Stampede®"
"3638 TRAXXAS
Shock tower (rear)" "Replacement rear shock tower
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Ford® F-150 Raptor
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Slash® VXL
Slash®
Stampede® VXL
Stampede®"
3670 TRAXXAS Traxxas 2.2 inch Monster Truck Tires for Stampede #3670 "This is a pack of two Traxxas 2.2 inch Monster Truck Tires, and are intended for use with the Traxxas Stampede monster truck.
Feature:
For: Traxxas Stampede / Rustler
Material: Rubber
Color: Black
Include:
2.2"" Monster Truck Tire (2 pcs)"
3696 TRAXXAS Idler gear, steel (30-tooth) "Replacement 30-tooth steel idler gear for the Magnum 272 transmission. Does not fit Magnum 272R transmission.
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Ford® F-150 Raptor
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash
Slash®
Stampede® VXL
Stampede®"
3740 TRAXXAS Suspension pins, 2.5x31.5mm (king pins) w/ E-clips (2) (strengthens caster blocks) "Replace the stock screw pins with these heavy-duty steel suspension pins that are stronger, fit more precisely, and pivot with less friction. These are required hardware for installing the 2532 tie bar.
Replacement part for these models:
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Rustler®
Stampede®
Accessory part for these models:
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Rustler®
Stampede®"
"3768 TRAXXAS
Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))" "Upper and lower spring retainers for Ultra Shocks with 2-hole pistons (2) and 3-hole pistons (2)
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Drag Slash 1967 Chevrolet® C10 Truck
Drag Slash Ford® Mustang® 5.0
Ford Fiesta® ST Rally
Ford® F-150 Raptor
Ford® F-150® Raptor R™ 4X4
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Nitro Rustler®
Nitro Slash
Rustler® 4X4 Brushless
Rustler® 4X4 VXL
Rustler® 4X4
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash 4X4 VXL
Slash 4X4
Slash VXL
Slash
Slash® 4X4 Brushless
Slash® 4X4 VXL
Slash® VXL
Slash®
Stampede® 4X4 Brushless
Stampede® 4X4 VXL
Stampede® 4X4
Stampede® VXL
Stampede®
T-Maxx®
Accessory part for these models:
Slash 4X4 Ultimate
Slash® 4X4 Ultimate"
3925 TRAXXAS Seal kit, receiver box (includes o-ring, seals, and silicone grease) "Refresh your 3924 sealed receiver box with this seal kit. Includes new O-ring, foam seal, and silicone grease
Replacement part for these models:
Blast
Slash 4X4 VXL
Slash 4X4
Slash® 4X4 Brushless
Slash® 4X4 VXL
"
3952 TRAXXAS TRAXXAS 3952 - PIGNONE 22 DENTI CON GRANO
3982 TRAXXAS Washer, PTFE-coated 6x8x0.5 (10) "Set of ten 6x8x0.5 mm PTFE-coated washers
Replacement part for these models:
Nitro Slash
Revo®
Slayer® Pro 4X4
Summit
T-Maxx®"
3984 TRAXXAS TRAXXAS 3984 - INGRANAGGIO 1° MARCIA E-MAXX 36T
"4013 TRAXXAS
Gasket, back plate" "Backplate gasket for the TRX® Pro.15 nitro engine
Replacement part for these models:
TRX® Pro .15"
4091 TRAXXAS VINTAGE Traxxas 4091 Nitro DIGITAL ON BOARD TEMPERATURE GAUGE dovrebbe essere questo, domani continuo
"4676 TRAXXAS
Spur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch)" "76-tooth spur gear (48-pitch) for Torque Control slipper clutches. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.
Replacement part for these models:
Bandit® VXL
Drag Slash 1967 Chevrolet® C10 Truck
Drag Slash Ford® Mustang® 5.0
Rustler® VXL
Accessory part for these models:
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Ford Fiesta® ST Rally
Ford® Fiesta® ST Rally
Rustler® VXL
Rustler®
Slash VXL
Slash® VXL
Stampede® VXL
Stampede®
"
4886 TRAXXAS TRAXXAS 4886 Corona 2° Marcia 37 denti 4TEC/GEAR 2ST 37-TOOTH TRAXXAS "CORONA 2° MARCIA 4TEC TRAXXAS/GEAR 2ST 37-TOOTH TRAXXAS
Modello: CORONA 2° MARCIA 4 TEC 37 Denti ( STANDARD )
Colore: ( COME FOTO)
Corona 2° Marcia 4 TEC 37 Denti TRAXXAS
Cod.Prod.TRAXXAS 4886"
4915 TRAXXAS Body washers, foam adhesive (10) "Set of 10 adhesive foam body washers help protect your custom paint work by providing a cushion between the body and body post for more secure mounting and less rattling.
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
Revo®
Slayer® Pro 4X4
Summit
T-Maxx®
TRX-4® 1979 Chevrolet® Blazer®
TRX-4® 1979 Ford® Bronco®
TRX-4® Equipped with Traxx®
TRX-4® Land Rover® Defender®
TRX-4® Sport High Trail Edition™
TRX-4® Sport Unassembled Kit
TRX-4® Sport
TRX-6® Mercedes-Benz® G 63® AMG 6X6
TRX-6® Ultimate RC Hauler
Accessory part for these models:
TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™
TRX-4® Chevrolet® K10 High Trail Edition™
TRX-4® Ford® F-150® High Trail Edition™
TRX-4® Unassembled Kit
"
4948 TRAXXAS Fuel Tank (125cc) "125 cc fuel tank complete with cap
Replacement part for these models:
T-Maxx®"
5116 TRAXXAS Ball bearings, blue rubber sealed (5x11x4mm) (2) "Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction.
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Chevrolet® Corvette® Stingray
Drag Slash 1967 Chevrolet® C10 Truck
Drag Slash Ford® Mustang® 5.0
E-Revo® VXL Brushless
Factory Five '33 Hot Rod Coupe
Factory Five '35 Hot Rod Truck
Ford Fiesta® ST Rally
Ford® F-150 Raptor
Ford® F-150® Raptor R™ 4X4
Ford® Fiesta® ST Rally
Ford® GT
Ford® Mustang GT®
Hoss® 4X4 VXL
Jato®
Nitro Slash
Revo®
Rustler® 4X4 Brushless
Rustler® 4X4 VXL
Rustler® 4X4
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Slash VXL
Slash
Slash® 4X4 Brushless
Slash® 4X4 Ultimate
Slash® 4X4 VXL
Slash® VXL
Slash®
Slayer® Pro 4X4
Stampede® 4X4 Brushless
Stampede® 4X4 VXL
Stampede® 4X4
Stampede® VXL
Stampede®
Summit
T-Maxx®
Toyota® GR Supra GT4®
X-Maxx®
XRT®
Accessory part for these models:
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Rustler®
Stampede®
Nitro Rustler®"
5117 TRAXXAS Ball bearings, blue rubber sealed (6x12x4mm) (2) "Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction.
Replacement part for these models:
Ford Fiesta® ST Rally
Ford® F-150® Raptor R™ 4X4
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Revo®
Rustler® 4X4 Brushless
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Slash® 4X4 Brushless
Slash® 4X4 Ultimate
Slash® 4X4 VXL
Slayer® Pro 4X4
Stampede® 4X4 Brushless
Stampede® 4X4 VXL
Stampede® 4X4
Summit
T-Maxx®
XO-1®
Accessory part for these models:
Stampede® 4X4"
5129 TRAXXAS Rebuild kit (for Revo®/E-Revo® (first generation)/T-Maxx®/E-Maxx steel constant-velocity driveshafts) (includes pins, dustboots, & lube for 2 driveshafts assemblies) "Rebuild kit (for Revo/Maxx steel constant-velocity driveshafts) (includes pins, dustboots, & lube for 2 driveshafts assemblies)
Accessory part for these models:
Revo®
T-Maxx®
"
"5140 TRAXXAS
Header, aluminum (T-Maxx®) (for rear exhaust engines only) (TRX 2.5, 2.5R, 3.3)" "Replacement aluminum exhaust header for T-Maxx® with TRX® 2.5 and 3.3 engines.
Replacement part for these models:
T-Maxx®
TRX® 2.5R
TRX® 3.3"
5148 TRAXXAS Grease, white lithium "Tube of white lithium grease
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Drag Slash 1967 Chevrolet® C10 Truck
Drag Slash Ford® Mustang® 5.0
Ford Fiesta® ST Rally
Ford® F-150 Raptor
Ford® F-150® Raptor R™ 4X4
Ford® Fiesta® ST Rally
Hoss® 4X4 VXL
Nitro Rustler®
Nitro Slash
Rustler® 4X4 Brushless
Rustler® 4X4 VXL
Rustler® 4X4
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Slash VXL
Slash
Slash® 4X4 Brushless
Slash® 4X4 Ultimate
Slash® 4X4 VXL
Slash® VXL
Slash®
Stampede® 4X4 Brushless
Stampede® 4X4 VXL
Stampede® 4X4
Stampede® VXL
Stampede®
T-Maxx®
TRX® 2.5R
TRX® 3.3
XO-1®
Accessory part for these models:
Jato®
Revo®
Slayer® Pro 4X4
TRX® 2.5R
TRX® 3.3"
5150 TRAXXAS E-clips, 1.5mm (24) "Set of 24 1.5 mm E-clips
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
E-Revo® VXL Brushless
Jato®
Revo®
Slayer® Pro 4X4
Summit
T-Maxx®
TRX-4® Equipped with Traxx®
TRX-4® Traxx® All-Terrain Track Set"
5167 TRAXXAS Slide carb linkage bellcrank post/ 5x8x2.5 plastic bushing (2)/ bellcrank/ 5x8x0.5 fiber washer (2)/ 3x10 WM "Replacement slide carb bellcrank with bellcrank post, 5x8x2.5 mm bushings (2), 5x8x0.5 mm washers (2), and 3x10 screws (2).
Replacement part for these models:
T-Maxx®"
"5168 TRAXXAS
Slide carb linkage set (throttle link, brake link, and hardware)" "Replacement slide carburetor linkage set includes throttle link, brake link, and hardware.
Replacement part for these models:
T-Maxx®"
5224 TRAXXAS Rod, connecting (TRX® 2.5, 2.5R, 3.3) "Replacement connecting rod for TRX® 2.5 and 3.3 engines.
Replacement part for these models:
TRX® 2.5R
TRX® 3.3"
"5235 TRAXXAS Wrist pin clips (3) (TRX® 2.5, 2.5R, 3.3)
" "Pack of three wrist pin clips (G-springs) for TRX® 2.5, 2.5R, and 3.3 engines.
Replacement part for these models:
TRX® 2.5R
TRX® 3.3
"
5245 TRAXXAS Pipe coupler, molded (blue)/ exhaust deflecter (rubber, blue)/ cable ties, long (2)/ cable ties, short (2) "Blue molded rubber pipe coupler and deflector with 2 long and 2 short cable ties
Replacement part for these models:
Jato®
Revo®
Slayer® Pro 4X4
TRX® 2.5R
TRX® 3.3"
"5256 TRAXXAS
O-ring, header 12.2x1mm (TRX® 2.5)" "Replacement 12.2x1 mm header O-ring for TRX® 2.5, 2.5R, and 3.3 engines.
Replacement part for these models:
Jato®
Revo®
Slayer® Pro 4X4
T-Maxx®
TRX® 2.5R
TRX® 3.3"
5263 TRAXXAS Air filter oil "Traxxas air filter oil is specially made for filtration, not lubrication. It's extra-sticky to trap extremely small particles of dust and dirt in the foam element.
Replacement part for these models:
Jato®
Nitro Rustler®
Nitro Slash
Revo®
Slayer® Pro 4X4
T-Maxx®
TRX® 2.5R
TRX® 3.3
Accessory part for these models:
Jato®
Revo®
Slayer® Pro 4X4
TRX® 2.5R
TRX® 3.3
TRX® Pro .15"
5265 TRAXXAS Air filter housing/ foam insert/ Jato® air filter base (long, straight)/ cable tie (1-each) (TRX® 2.5) "Straight air filter housing with foam insert and cable tie. Fits Jato® with the TRX® 2.5, 2.5R, or 3.3 engine.
Replacement part for these models:
Jato®
TRX® 2.5R
TRX® 3.3"
5266 TRAXXAS Air filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/ Revo® air filter base (angled)/wire mount/hardware (1 each) (TRX® Engines) "Angled high-volume air filter housing with foam insert and cable tie. Includes wire support. Fits TRX® 2.5, 2.5R, or 3.3 engines.
Replacement part for these models:
Revo®
Accessory part for these models:
Slayer® Pro 4X4"
5267 TRAXXAS Air filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/ filter base (angled)/wire mount/hardware (1 each) (Fits Maxx® trucks) "Angled high-volume air filter housing with foam insert and cable tie. Includes wire support. Fits T-Maxx® trucks with TRX® 2.5, 2.5R, or 3.3 engines.
Replacement part for these models:
T-Maxx®
Accessory part for these models:
T-Maxx®"
"5276 TRAXXAS
Gear set (complete) (EZ-Start® 2)" "Complete EZ-Start® 2 replacement gear set
Replacement part for these models:
Jato®
Nitro Rustler®
Nitro Slash
Revo®
Slayer® Pro 4X4
T-Maxx®
TRX® 2.5R
TRX® 3.3"
5280 TRAXXAS Control box (complete) (EZ-Start® 2) "Replacement starter control box for the EZ-Start® 2 starter.
Replacement part for these models:
Jato®
Nitro Rustler®
Nitro Slash
Revo®
Slayer® Pro 4X4
T-Maxx®
TRX® 2.5R
TRX® 3.3"
5292 TRAXXAS Gaskets, cooling head: 0.20, 0.30, 0.40mm (1 each) (0.30mm stock) (TRX® 3.3) "Gaskets, cooling head: 0.20, 0.30, 0.40mm (1 each) (0.30mm stock) (TRX® 3.3)
Replacement part for these models:
TRX® 3.3"
5329 TRAXXAS Bulkhead, rear (L&R halves)/ diff retainer, rear/ 4x14mm BCS (2) "Rear left and right bulkhead halves with differential retainer and 4x14 screws (4)
Replacement part for these models:
Revo®
Slayer® Pro 4X4"
5330 TRAXXAS Bulkhead, front (L&R halves)/ diff retainer/ 4x14mm BCS (4) "Front left and right bulkhead halves with differential retainer and 4x14 screws (4)
Replacement part for these models:
Revo®
Slayer® Pro 4X4
"
5334 TRAXXAS Axle carriers, left & right (1 each) "Left and right axle carriers
Replacement part for these models:
T-Maxx®"
"5337 TRAXXAS
Skid plate set, front (2 pieces, plastic)/ skid plate, rear (1 piece, plastic)" "Skid plate set includes front and rear skid plates.
Replacement part for these models:
Revo®
Slayer® Pro 4X4
Summit"
5344 TRAXXAS Steering arm (upper & lower)/ servo saver/ servo saver spring/ steering arm shaft "Upper and lower steering arms with integrated servo saver, servo saver spring, and steering arm shaft.
Replacement part for these models:
E-Revo® VXL Brushless
Slayer® Pro 4X4
Summit"
5347 TRAXXAS Rod ends, Revo® (large) with hollow balls (12) "Set of twelve large Revo®-style rod ends with hollow balls.
Replacement part for these models:
Bandit® VXL
Drag Slash 1967 Chevrolet® C10 Truck
Drag Slash Ford® Mustang® 5.0
Ford® F-150 Raptor
Nitro Slash
Revo®
Rustler® VXL
Slash 2WD Unassembled Kit
Slash VXL
Slash
Slash® VXL
Slash®
Slayer® Pro 4X4
Stampede® VXL
Summit
T-Maxx®
Accessory part for these models:
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Rustler®
Slayer® Pro 4X4
Stampede®"
5351 TRAXXAS Slipper pressure plate and hub (alloy) "Heavy-duty pressure plate and hub for the 5352X or 5352R slipper clutch rebuild kits. Does not fit #5552X standard-duty clutch rebuild kit.
Replacement part for these models:
Revo®
Rustler® 4X4 Brushless
Rustler® 4X4 VXL
Rustler® 4X4
Slayer® Pro 4X4
Stampede® 4X4 Brushless
Summit
T-Maxx®
Accessory part for these models:
Ford Fiesta® ST Rally
Ford® F-150® Raptor R™ 4X4
Ford® Fiesta® ST Rally
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Slash® 4X4 Brushless
Slash® 4X4 Ultimate
Slash® 4X4 VXL
Stampede® 4X4 VXL
Stampede® 4X4"
"5359 TRAXXAS
Rocker arm set, progressive-3 (90-T) (requires pushrods part #5319 or 5319X)" "Progressive-rate 3 rocker arms determine how much the compressive force at the wheel will vary with suspension travel. The higher the rate, the more the suspension will stiffen as the wheel moves upward. Rocker arms are available in 3 progressive rates with 1 having softest rate and 3 being the stiffest. Progressive-3 rockers reduce body lean and brake dive and provide the most responsive handling. Progressive 3 rockers require new push rods (sold separately). Use push rods 5319 or 5319X.
Accessory part for these models:
Revo®
Slayer® Pro 4X4
Summit
"
"5495 TRAXXAS
Linkage, front sway bar (Revo®) (3x70mm turnbuckle) (2) (assembled with rod ends, hollow balls and ball stud)" "Pair of front sway bar linkages comes assembled with rod ends, hollow balls, and ball studs.
Accessory part for these models:
Revo®
Slayer® Pro 4X4"
5497 TRAXXAS VINTAGE Traxxas 5497 Sway Bar Linkage links REAR Revo 3.3 Slayer Pro 4x4 RARE "TRAXXAS REAR SWAY BAR LINKAGE
FOR SLAYER AND REVO 5497 VINTAGE RARE FACTORY PACKAGED
Linkage , rear sway bar (Revo / Slayer) (3x50mm turnbuckle) (2) (assembled with rod ends , hollow balls and ball stud)"
5523 TRAXXAS CHASSIS TOP PLATE "Replacement chassis top plate
Replacement part for these models:
Jato®"
5573 TRAXXAS Tires & wheels, assembled, glued (Jato® twin-spoke wheels, Victory tires, foam inserts) (rear) (2) "Victory® tires come mounted and pre-glued to 2.8″ chrome Twin-Spoke wheels with foam inserts for no-hassle bolt-on traction. Rear Victory tires are ideal for medium to hard packed surfaces with their medium sized ""V"" pins and larger directional ""V"" treads down the inner, outer, and center-line of the tire. Tires come pre-glued and mounted to 2.8″ chrome twin spoke wheels with a brilliant mirror-chrome face and a natural nylon bead for fast, easy tire gluing. The horizontal bead helps grab the tire, reducing the stress placed on the glue joint by tire expansion. Fits 12 mm hex, nitro rear.
Accessory part for these models:
Jato®
Nitro Rustler®"
"5575 TRAXXAS
Tires & wheels, assembled, glued (Jato® twin-spoke wheels, Victory tires, foam inserts) (front) (2)" "Victory® tires come mounted and pre-glued to 2.8″ chrome Twin-Spoke wheels with foam inserts for no-hassle bolt-on traction. Victory tires are ideal for medium to hard packed surfaces with their medium sized ""V"" pins and larger directional ""V"" treads down the inner, outer, and center-line of the tire. Tires come pre-glued and mounted to 2.8″ chrome twin spoke wheels with a brilliant mirror-chrome face and a natural nylon bead for fast, easy tire gluing. Fits nitro front.
Accessory part for these models:
Jato®
Nitro Rustler®
"
"5581 TRAXXAS
Gaskets, differential/transmission" "Set of differential and transmission gaskets
Replacement part for these models:
Jato®"
5627 TRAXXAS Door, battery compartment (2) (fits right or left side) "Battery compartment doors (2) fit right or left side
Replacement part for these models:
E-Revo® VXL Brushless
Summit"
5637 TRAXXAS SKIDPLATE SOTTOTELAIO EREVO "Replacement part for these models:
E-Revo® VXL Brushless
Summit"
5723 TRAXXAS Hatch post/hull water outlet/foam pads (10)/ washer (1)/ 4x8mm BCS, stainless steel/ 3x4mm BCS, stainless steel "Hatch post with hull water outlet, foam pads (10), washer, 4x8 mm stainless screw and 3x4 mm stainless screw
Replacement part for these models:
DCB M41 Widebody
Spartan®"
"5725 TRAXXAS
Seal, stuffing tube (1)/ push rod (1)" "Stuffing tube seal and push rod hull seal
Replacement part for these models:
DCB M41 Widebody
Spartan®"
"5734 TRAXXAS
Stuffing tube (assembled with liner)" "Replacement stuffing tube assembled with liner
Replacement part for these models:
Spartan®"
5761 TRAXXAS Motor coupler, collet style/ GS 4x3 (with threadlock) (1)/ Wrench, 10mm (2) "Collet-style motor coupler with 4x3 stainless grub screw with applied threadlock and 10 mm wrenches (2)
Replacement part for these models:
DCB M41 Widebody
Spartan®"
5873 TRAXXAS Tires & wheels, assembled, glued (SCT, satin chrome wheels, beadlock type (dual profile 2.2" outer 3.0" inner), SCT off-road tires, foam inserts) (2) (Rear) (TSM® rated) "Replacement part for these models:
Slash
Slash® 4X4 VXL
Slash®
Accessory part for these models:
Ford® F-150 Raptor
Nitro Slash
Slash 2WD Unassembled Kit
Slash 4X4 VXL
Slash 4X4
Slash VXL
Slash
Slash® 4X4 Brushless
Slash® VXL"
5875 TRAXXAS Tires & wheels, assembled, glued (SCT, satin chrome wheels, beadlock type (dual profile 2.2" outer 3.0" inner), SCT off-road tires, foam inserts) (2) (Front) "Pair of SCT off-road tires come pre-glued and mounted with foam inserts to satin-chrome dual-profile SCT wheels with beadlock-style trim. Fits 12 mm hex, 2WD front only.
Replacement part for these models:
Slash
Slash®
Accessory part for these models:
Ford® F-150 Raptor
Nitro Slash
Slash 2WD Unassembled Kit
Slash VXL
Slash
Slash® VXL"
6433 TRAXXAS Splitter extension / canards, left and right / 4x12mm CCS (4)/ 3x10mm CCS (2) Replacement splitter extension with left and right canards, 4x12 mm screws (4) and 3x10 mm screws (2)
6488 TRAXXAS TRAXXAS XO-1 MOD 1 PINION GEAR 14T "This is a replacement Traxxas 14 Tooth Mod 1 Pinion Gear, and is intended for use with the Traxxas XO-1.
Feature:
For: Traxxas XO-1
Material: Steel
Color: Gun-metal
Specification:
Turn: 14
Include:
Traxxas XO-1 Mod 1 Pinion Gear 14T (1 set)
"
"6492 TRAXXAS
Gear, 29-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw" "29-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models:
XO-1®
"
"6493 TRAXXAS
Gear, 34-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw" "34-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Replacement part for these models:
XO-1®"
6877 TRAXXAS Cover, gear/ motor wire hold-down clip "Replacement gear cover with motor wire hold-down clip. Replacement part for these models:
Ford® F-150® Raptor R™ 4X4
Hoss® 4X4 VXL
Slash 4X4 VXL
Slash 4X4
Slash® 4X4 Brushless
Slash® 4X4 VXL
Stampede® 4X4 Brushless
Stampede® 4X4 VXL
Stampede® 4X4"
7023 TRAXXAS Bulkhead tie bars, front & rear (blue-anodized aluminum)/ 2.5x6 CS (1) "Front and rear blue-anodized aluminum bulkhead tie bars with 2.5x6 mm screw. Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™"
7033 TRAXXAS Pivot balls (4)/ pivot ball caps (4) "Set of four steel pivot balls with pivot ball caps (4)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™"
7034 TRAXXAS Axle carriers, left & right (2 each) "Set of four replacement axle carriers, 2 left and 2 right. Fits front or rear.
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™"
"7051 TRAXXAS
Driveshaft assembly (1) left or right (1/16 Slash) (fully assembled, ready to install)/ 3x10mm screw pin (1)" "The fully-assembled driveshaft comes complete and ready to install with 3x10 mm screw pin. Fits left or right side.
Replacement part for these models:
1/16 Slash 4WD"
7059 TRAXXAS Rod ends (8)/ hollow balls (8) (fits 1/16 and 1/18 accessory suspension links) "Set of eight rod ends with hollow balls
Accessory part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™
TRX-4M™ 1/18 Ford® Bronco®
TRX-4M™ 1/18 Land Rover® Defender®"
"7150 TRAXXAS
Half shafts, left or right (internal splined half shaft (2)/external splined half shaft) (2))/ metal u-joints (4)" "Set of two half shafts includes internal shafts (2) and external shafts (2) with metal crosses (4)
Replacement part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®"
7315 TRAXXAS Body mount, rear/ body mount posts, front (2)/body washer, rear (2) Front and rear body mounts with rear body washers (2)
7317 TRAXXAS TRAXXAS WING FORD FIESTA (BLACK) - 7317 TRAXXAS WING FORD FIESTA (BLACK) - 7317 or 38-7317 or TRA7317
"2336A TRAXXAS
Turnbuckles, aluminum (blue-anodized), toe links, 61mm (2) (assembled w/ rod ends & hollow balls) (fits Stampede®) (requires 5mm aluminum wrench #5477)" "These 61 mm aluminum toe links add strength and adjustability to your Traxxas model. The turnbuckles come in a brilliant anodized finish for stunning looks. Use the 5477 5 mm aluminum wrench to prevent marring the finish. Toe links come assembled with rod ends & hollow balls.
Accessory part for these models:
Bigfoot® Officially Licensed Replica
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Stampede® VXL
Stampede®
"
2381X TRAXXAS Main diff with steel ring gear/ side cover plate/ screws (Bandit, Stampede®, Rustler®) "Replacement metal-gear differential case with side plate and screws for Magnum 272™ transmissions. Internal gears sold separately. Does not fit Magnum 272R transmission
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Ford® F-150 Raptor
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Slash® VXL
Slash®
Stampede® VXL
Stampede®"
2742X TRAXXAS Rod Ends, short (6)/ hollow balls (6) "Set of six short rod ends with hollow ball connectors
Replacement part for these models:
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Chevrolet® Corvette® Stingray
Drag Slash 1967 Chevrolet® C10 Truck
Drag Slash Ford® Mustang® 5.0
Ford Fiesta® ST Rally
Ford® F-150 Raptor
Ford® F-150® Raptor R™ 4X4
Ford® Fiesta® ST Rally
Ford® GT
Ford® Mustang GT®
Hoss® 4X4 VXL
Nitro Rustler®
Nitro Slash
Rustler® 4X4 Brushless
Rustler® 4X4 VXL
Rustler® 4X4
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Slash VXL
Slash
Slash® 4X4 Brushless
Slash® 4X4 Ultimate
Slash® 4X4 VXL
Slash® VXL
Slash®
Stampede® 4X4 Brushless
Stampede® 4X4 VXL
Stampede® 4X4
Stampede® VXL
Stampede®
T-Maxx®
Toyota® GR Supra GT4®
Accessory part for these models:
Slash 4X4 Ultimate
Slash® 4X4 Ultimate"
2753X TRAXXAS Stub axles, rear (2) "Set of two replacement rear stub axles
Replacement part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Ford® F-150 Raptor
Nitro Rustler®
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash
Slash®
Stampede® VXL
Stampede®"
3623A TRAXXAS Skid plates, front & rear (green) "Green front and rear skid plates for Traxxas 2WD Stampede models.
Accessory part for these models:
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Stampede® VXL
Stampede®"
3636X TRAXXAS Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4 "Traxxas aluminum steering blocks improve the appearance, ruggedness, and control of your Traxxas model. The machined billet 6061-T6 aluminum construction adds strength and precision where you want it most with a brilliant anodized finish. Four 5x11 mm rubber-sealed ball bearings are included for smooth performance, reduced friction, and longer life.
Accessory part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Drag Slash 1967 Chevrolet® C10 Truck
Drag Slash Ford® Mustang® 5.0
Ford® F-150 Raptor
Nitro Slash
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Slash® VXL
Slash®
Stampede® VXL
Stampede®"
3652A TRAXXAS Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (blue-anodized)/ 5x11mm ball bearings (4) "Traxxas aluminum stub axle carriers improve the appearance and ruggedness of your Traxxas model. The machined billet 6061-T6 aluminum construction adds superior strength with a brilliant anodized finish. The included 5x11 mm rubber-sealed ball bearings provide smooth performance, reduced friction, and long life.
Accessory part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Drag Slash 1967 Chevrolet® C10 Truck
Drag Slash Ford® Mustang® 5.0
Ford® F-150 Raptor
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Slash® VXL
Slash®
Stampede® VXL
Stampede®"
3652X TRAXXAS Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4) "Traxxas aluminum stub axle carriers improve the appearance and ruggedness of your Traxxas model. The machined billet 6061-T6 aluminum construction adds superior strength with a brilliant anodized finish. The included 5x11 mm rubber-sealed ball bearings provide smooth performance, reduced friction, and long life.
Accessory part for these models:
Bandit® VXL
Bandit®
BIGFOOT® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Drag Slash 1967 Chevrolet® C10 Truck
Drag Slash Ford® Mustang® 5.0
Ford® F-150 Raptor
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Slash® VXL
Slash®
Stampede® VXL
Stampede®"
3777A TRAXXAS Tires & wheels, assembled, glued (All-Star black chrome wheels, Anaconda® tires, foam inserts) (nitro front) (1 left, 1 right) "Anaconda® performance street tires feature a specially formulated tire compound providing exceptional wear and sticky traction. Anaconda tires are mounted and pre-glued on futuristic 2.8″ All-Star™ black chrome wheels for no-hassle, out-of-the-box bolt-on traction. Molded-foam inserts coupled with the directional tread design provide a balanced feel for the ultimate high-speed on-road experience. Fits nitro front.
Accessory part for these models:
Jato®
Nitro Rustler®"
"3975R TRAXXAS
Motor, Titan 550, reverse rotation (21-turns/ 14 volts) (1)" "The Titan® 550 reverse-rotation motor is a 21-turn fan-cooled 550 size powerhouse capable of handling 14.4 volts. This powerful motor has a 30% longer armature than a standard 540 size motor for extreme monster torque.
Replacement part for these models:
TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™
TRX-4® 1979 Chevrolet® Blazer®
TRX-4® 1979 Ford® Bronco®
TRX-4® Chevrolet® K10 High Trail Edition™
TRX-4® Equipped with Traxx®
TRX-4® Ford® Bronco®
TRX-4® Ford® F-150® High Trail Edition™
TRX-4® Land Rover® Defender®
TRX-4® Sport High Trail Edition™
TRX-4® Sport
TRX-4® Unassembled Kit
TRX-6® Mercedes-Benz® G 63® AMG 6X6
TRX-6® Ultimate RC Hauler
Accessory part for these models:
TRX-4® Sport Unassembled Kit"
"4928X TRAXXAS
Differential output yokes (Heavy-duty) (2)/ set screw yoke pins, M4/10 (2)" "Heavy-duty differential output tokes (2) with set screw yoke pins
Replacement part for these models:
T-Maxx®"
4935X TRAXXAS Bumpers, 6061-T6, brushed aluminum front/rear "Informazione prodotto ""Bumpers, 6061-T6, brushed aluminum front/rear""
fits to:
Traxxas E-Maxx
Accessory part - Traxxas E-Maxx
#TRX39036-1 #TRX39036-4 #TRX39086-4 #TRX39087-3
Traxxas T-Maxx 3.3
Accessory part - Traxxas T-Maxx 3.3
#TRX49077-1 #TRX49077-3
Traxxas T-Maxx 3.3
Replacement part - Traxxas T-Maxx 3.3
#TRX49077-3
Traxxas T-Maxx 3.3
Accessory part - Traxxas T-Maxx 3.3
#TRX49104-1"
4949R TRAXXAS Traxxas – Cardani E-Maxx centrali metallo Cod. 4949R "Alberi di trasmissione, centrale, T-Maxx® (acciaio a velocità costante) anteriore (1) / posteriore (1) (montato con parapolvere interno ed esterno, per T-Maxx® con trasmissione Optidrive)
Durante la sostituzione di questo optional state attenti a lubrificare i particolari soggetti ad atriti come da istruzioni all’interno della confezione o tramite i manuoli forniti on-line.
Serrate bene le viti di fissaggio della trasmissione per evitare che si svitino durante il funzionamento causando gravi danni.
Tramite il nostro centro assistenza potete avvalervi di un servizio di assistenza preparato e autorizzato per svolgere manutenzione sui modelli Traxxas, risparmiando tempo e soldi avrete il vostro mezzo nuovamente pronto per darvi prestazioni super.
Utilizzate solamente ricambi originali per evitare di danneggiare i componenti interni della macchina creando ulteriori danni.
Per maggiori dettagli consultate il manuale in dotazione alla vostra Traxxas RC.
Parte Optional per questi modelli:
E-Maxx Brushless
E-Maxx Brushless(modello # 39087)
E-Maxx Brushless(modello n. 39087-1)
E-Maxx Brushless(modello n. 39087-3)
E-Maxx Brushless(Modello # 39086-4)
Alberi di trasmissione, centro, T-Maxx® (acciaio a velocità costante) anteriore (1) / posteriore (1) (assemblato con parapolvere interno ed esterno, per T-Maxx® con trasmissione Optidrive)
Alberi di trasmissione, centro T-Maxx (acciaio a velocità costante) anteriore (1) / posteriore (1) (assemblato con parapolvere interno ed esterno, per T-Maxx con trasmissione Optidrive)"
4973R TRAXXAS Tires & wheels, assembled, glued (Hurricane chrome wheels, Maxx® tires (6.3" outer diameter), foam inserts) (2) (fits Revo®/T-Maxx®/E-Maxx with 6mm axle and 14mm hex) "The massive 6.3″ Maxx wheel and tire combo deliver incredible grip off-road and increased ground clearance to overcome deep ruts and huge obstacles. They come pre-glued to 3.8″ chrome Hurricane wheels and are designed with a unique soft compound to maximize performance in a wide variety conditions. On off-road terrain the aggressive treads dig deep providing superior bite and massive roosts. On pavement the balanced grip allows just the right amount of scrub to maintain a sure-footed neutral feel. (Requires 14 mm wheel hubs)
Replacement part for these models:
T-Maxx®
Accessory part for these models:
Revo®
Summit
T-Maxx®"
5136X TRAXXAS Differential oil kit (1 each: 10K, 30K, 50K weights) "Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds.
Accessory part for these models:
Revo®
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™
4-Tec® 2.0 AWD Chassis
4-Tec® 2.0 VXL AWD Chassis
Chevrolet® Corvette® Stingray
E-Revo® VXL Brushless
Factory Five '33 Hot Rod Coupe
Factory Five '35 Hot Rod Truck
Ford Fiesta® ST Rally
Ford® F-150® Raptor R™ 4X4
Ford® Fiesta® ST Rally
Ford® GT
Ford® Mustang GT®
Hoss® 4X4 VXL
Jato®
Maxx®
Rustler® 4X4 Brushless
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash® 4X4 Brushless
Slash® 4X4 Ultimate
Slash® 4X4 VXL
Slayer® Pro 4X4
Sledge®
Stampede® 4X4 Brushless
Stampede® 4X4 VXL
Stampede® 4X4
Summit
T-Maxx®
Toyota® GR Supra GT4®
Unlimited Desert Racer®
X-Maxx®
XO-1®
XRT®"
"5344X TRAXXAS
Servo saver spring, heavy duty (for use with metal-gear servos)" "The heavy duty servo saver spring provides protection to metal gear servo drivetrains while providing crisp steering response.
Accessory part for these models:
Summit
E-Revo® VXL Brushless
Revo®
Slayer® Pro 4X4"
5360X TRAXXAS Big block conversion kit (engine mount and required hardware, Forward Conversion Kit for Transmission) "The big block installation kit makes it easy to bolt big block engine torque into your Traxxas truck. The kit includes all the components and hardware necessary for a factory-engineered, quality installation.
Replacement part for these models:
TRX® 2.5R
TRX® 3.3
Accessory part for these models:
TRX® 2.5R
Revo®
Slayer® Pro 4X4"
"5374A TRAXXAS
Tires & wheels, assembled, glued (Gemini black chrome wheels, Talon tires, foam inserts) (2)" "The Talon's unique tread pattern and soft compound rubber delivers excellent grip on a variety of surfaces. The large Gemini black chrome 3.8″ wheels provide responsive handling with the low-profile tire sidewall. Tires come pre-glued and ready to mount with matching foam inserts. Fits 14 mm wheel hubs with 6 mm axles.
Accessory part for these models:
Summit"
5378X TRAXXAS Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck) "Pivot ball cap set includes pivot ball caps (4), rubber dust boots (4) rubber dust plugs (4), blue dust boot retainers (4), and black dust boot retainers (4). Two sets required for complete truck.
Replacement part for these models:
E-Revo® VXL Brushless
Revo®
Slayer® Pro 4X4
Summit
T-Maxx®"
5458X TRAXXAS Yokes, differential and transmission (2)/ 4x15mm screw pins (2) "Replacement differential and transmission yokes( 2) with 4x15 mm screw pins (2).
Replacement part for these models:
Revo®
Slayer® Pro 4X4
T-Maxx®"
5677R TRAXXAS Cover, gear/ 3x8mm CS (1) (for single motor installation, use with motor plate #5690X) "Easily convert your dual-motor truck to a single brushless motor using the Traxxas single motor gear cover. The one-piece gear cover keeps dirt and debris out, while allowing easy access to the pinion and spur gear. Slipper clutch adjustments are easy thanks to the exposed slipper nut. These parts give your brushless install a clean factory fit and finish. Requires 5690X single-motor plate.
Replacement part for these models:
Summit"
"6851R TRAXXAS
Driveshafts, front, steel-spline constant-velocity (complete assembly) (2)" "Traxxas steel constant velocity driveshafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look.
Accessory part for these models:
Hoss® 4X4 VXL
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Slash® 4X4 Ultimate
Slash® 4X4 VXL
Stampede® 4X4 VXL
Stampede® 4X4"
6852X TRAXXAS Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) "The heavy-duty rear driveshaft comes pre-assembled and ready to install with screw pin. It's a step up from standard driveshafts with improved performance and durability. For higher-power applications, Traxxas Extreme HD and steel CV driveshafts provide the ultimate level of performance. Fits left or right side.
Replacement part for these models:
Nitro Slash
Slash 4X4 VXL
Slash 4X4
Slash VXL
Slash® VXL
Stampede® 4X4 VXL
Stampede® 4X4
Accessory part for these models:
Ford® F-150 Raptor
Slash 2WD Unassembled Kit
Slash
Slash®"
6888X TRAXXAS Drive hub, front, hardened steel (1)/ screw pin (1) "The replacement hardened-steel drive hub connects your front differential to the aluminum center driveshaft. This is a required part if upgrading from a composite driveshaft to an aluminum driveshaft. Includes screw pin.
Replacement part for these models:
Ford Fiesta® ST Rally
Ford® F-150® Raptor R™ 4X4
Hoss® 4X4 VXL
Rustler® 4X4 Brushless
Rustler® 4X4 VXL
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash® 4X4 Ultimate
Slash® 4X4 VXL
Stampede® 4X4 VXL
XO-1®
Accessory part for these models:
Ford® Fiesta® ST Rally
Rustler® 4X4 Brushless
Rustler® 4X4
Slash 4X4
Slash® 4X4 Brushless
Stampede® 4X4 Brushless
Stampede® 4X4"
"6893X TRAXXAS
Bearing adapter, 6061-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)" "Upgrade your slipper shaft with this tough 6160-T6 aluminum adapter. Perfect for high-power applications, the aluminum bearing adapter tolerates a wide heat range to keep you on the throttle longer for more intense action. Includes 10x15x4 mm black-seal bearing.
Replacement part for these models:
Slash 4X4 Ultimate
Slash® 4X4 Ultimate
Accessory part for these models:
Ford Fiesta® ST Rally
Ford® F-150® Raptor R™ 4X4
Ford® Fiesta® ST Rally
Rustler® 4X4 Brushless
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Slash® 4X4 Brushless
Slash® 4X4 Ultimate
Slash® 4X4 VXL
Stampede® 4X4 Brushless
Stampede® 4X4 VXL
Stampede® 4X4"
"7045R TRAXXAS
Spur gear, 45-tooth" "45-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.
Accessory part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Slash 4WD
1/16 Summit™"
"7118X TRAXXAS
Push rods, aluminum (red-anodized) (4) (assembled with rod ends)" "Reduce flex, increase precision, and add red-anodized style to your 1/16 scale Traxxas truck with this set of four 6061-T6 aluminum push rods. Solid aluminum construction delivers exceptional stiffness without excess weight, and the rod ends are installed for you.
Accessory part for these models:
1/16 E-Revo® VXL
1/16 E-Revo®
1/16 Summit™"