Extron XPA 1002 Two Channel Low Impedance Xtra Power Signal Amplifier
Model: XPA 1002
Part Number: 60-849-01
In Good Condition, Full Working Order
Tested
Includes AC Adapter
Includes:
- 1 x Extron XPA 1002 Two Channel Low Impedance Xtra Power Signal Amplifier 60-849-01
Description:
The Extron XTRA Series XPA 1002 is a half rack 1U, convection cooled power amplifier delivering two channels of 60 watts per channel at 8 ohms. The XPA 1002 is an ENERGY STAR qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The XPA 1002 is housed in a half rack width metal enclosure, conserving rack space and weighing only 2.5 lbs (1.1 kg). The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be convection cooled.
Specifications:
Audio- Voltage gain: 16x (24 dB)
- Stereo channel separation: >75 dB @ 1 kHz
- CMRR: 75 dB @ 1 kHz (typical)
Audio input
- Number/signal type : 1 stereo or 2 mono, balanced/unbalanced
- Connectors: (1) 3.5 mm captive screw connector, 5 pole
- Impedance: >10k ohms unbalanced/balanced, DC coupled
- Nominal level: +4 dBu (1.23 Vrms), balanced
- Maximum level: +20 dBu (7.75 Vrms), balanced
- Input sensitivity: +4 dBu (1.23 Vrms)
- Input signal detection threshold: -40 dBu ±3 dB, balanced
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output:
- Number/signal type: 1 stereo, 4 or 8 ohm direct
- Connectors: (1) 5 mm screw lock captive screw connector, 4 pole
- NOTE: These connectors accept wires of 22 AWG to 12 AWG.
- Load impedance: 4 ohms minimum
- Amplifier type: Class D
- Output power:
- 60 watts rms per channel, 8 ohms, 1 kHz, <0.05% THD
- 100 watts rms per channel, 4 ohms, 1 kHz, <0.05% THD
- Frequency response: 20 Hz to 20 kHz, ±1 dB
- THD + Noise: 0.05% @ 20 Hz - 20 kHz, 8 ohms, at 3 dB below clipping
- S/N: 105 dB, 20 Hz - 20 kHz, unweighted
- Damping factor: >100 @ 8 ohms
Control/remote:
- Control port: (1) 3.5 mm captive screw connector, 5 pole
- Pin configurations:
- DC volume control (analog): Pin 1 = +10 VDC, 50 mA (max.), pin 2 = volume/mute (variable voltage), pin 3 = GND
- Volume control voltage range: 0 V (mute) to 10 V (maximum volume)
- Standby power control (contact closure): Pin 4 = GND, pin 5 = standby
General:
- Power supply: Internal
- Input: 100-240 VAC, 50-60 Hz, 0.5 A
- Ambient temperature/humidity:
- Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
- Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
- Cooling: Convection, no vents, with internal heat sinks
- Protection: Clip limiting, thermal, short circuit, DC output
- Indication: Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, short circuit
- Rack mount: Yes, with optional 1U rack shelf
- Enclosure type: Metal
- Enclosure dimensions: 1.7" H x 8.7" W x 9.5" D (1U high, half rack wide) (4.3 cm H x 22.1 cm W x 24.1 cm D)
- Product weight: 2.5 lbs (1.1 kg)
- Vibration: ISTA 1A in carton (International Safe Transit Association)
VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED
£80 excluding VAT
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK
CS 300505