Size of Wraps are 24" by 48" 

You will receive 2 of the wraps as pictured unless you contact me about wanting one of my other designs.

With LAMINATED CORNHOLE WRAPS. you will not need to apply a clear coat over the top of them. Instead we go the extra mile and apply a tough, clear laminate on top of each print to add a high gloss finish and extra protection.

With laminated graphics, just apply and PLAY!

Wraps are digitally printed with Eco-Sol Ink on Rapid Air Release Vinyl. This is the best ink on the market and high quality wrap vinyl. This special vinyl allows you to eliminate any bubbles you may have much easier, while trying to install, just by simply pressing gently on them with your finger. All wraps must be applied dry and to a very clean, smooth surface. All wraps should have a clear coat applied after being installed to help protect your wrap and to give you the slick surface needed for cornhole boards.

Center hole is not pre-cut and will not be printed on the design. The only time a circle will be printed is if once it is applied to the board and trimmed, creating a ring around the hole. This allows you to install the graphic to your custom built board, then cut the hole out with a razor blade. If you want to have a border around your board, just install the wrap as normal, then with a straight edge, trim off the outside edges to give yourself that 1/4" or 1/2" border to set the look off!!

Orders are shipped within 24 hours so you get your wraps QUICK!

All of my decals are.....

Made in the USA

Printed on the Highest Resolution Possible

Printed with Eco-Sol Ink

Printed on High Quality Vinyl

THANKS AND PLEASE FEEL FREE TO CONTACT ME WITH ANY QUESTIONS