Description
CNC Photoelectric 3D Edge Finder 3D Touch Probe (Green Light) for CNC Milling Machine Tool Checking Instrument
Description:
01. Clamp the probe on the machine spindle through the tool holder, and loosen it slightly. The two opposite fastening screws at the bottom can adjust the four symmetrical adjustment tops on the side. The ball head of the wire adjustment probe coincides with the center of the spindle.
02. There is no need to rotate the spindle when measuring the centering, and the centering measurement can make the probe rotate. Turn 180° to make the measurement more accurate.
03. The probe supports measurement in three directions (X, Y, and Z), with reciprocating positioning accuracy ≤0.01, X Y deflection range 0-6°, Z direction telescopic range 1mm.
Beyond the safe range will damage the probe and probe.
04. The probe has two built-in 3V CR1616 lithium button batteries. Loosen the fastening screw and adjusting top wire when it is insufficient, remove the top cover to replace it. Pay attention to the positive and negative poles of the battery when replacing, and re-adjust the probe center position after replacement.
05. The side head does not support the detection of insulating materials and insulated machine bed.
06. The probe supports dust and a small amount of dripping and water resistance, do not drip for a long time and wash.
Features:
- New photoelectric 3D edge finder
- With aluminum alloy shell
- All-polished tungsten steel probe
- Repeat positioning 0.01
- Travel 1mm/0.04" in Z direction and XY swing about 6 degrees
- Probe thread M4
- Ball head diameter 4mm/0.2" and length 40mm/1.6"
- The detection of insulating materials and insulating spindles is not supported
Package Included:
- 1 x 3D Edge Finder
Description:
01. Clamp the probe on the machine spindle through the tool holder, and loosen it slightly. The two opposite fastening screws at the bottom can adjust the four symmetrical adjustment tops on the side. The ball head of the wire adjustment probe coincides with the center of the spindle.
02. There is no need to rotate the spindle when measuring the centering, and the centering measurement can make the probe rotate. Turn 180° to make the measurement more accurate.
03. The probe supports measurement in three directions (X, Y, and Z), with reciprocating positioning accuracy ≤0.01, X Y deflection range 0-6°, Z direction telescopic range 1mm.
Beyond the safe range will damage the probe and probe.
04. The probe has two built-in 3V CR1616 lithium button batteries. Loosen the fastening screw and adjusting top wire when it is insufficient, remove the top cover to replace it. Pay attention to the positive and negative poles of the battery when replacing, and re-adjust the probe center position after replacement.
05. The side head does not support the detection of insulating materials and insulated machine bed.
06. The probe supports dust and a small amount of dripping and water resistance, do not drip for a long time and wash.
Features:
- New photoelectric 3D edge finder
- With aluminum alloy shell
- All-polished tungsten steel probe
- Repeat positioning 0.01
- Travel 1mm/0.04" in Z direction and XY swing about 6 degrees
- Probe thread M4
- Ball head diameter 4mm/0.2" and length 40mm/1.6"
- The detection of insulating materials and insulating spindles is not supported
Package Included:
- 1 x 3D Edge Finder
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Oct 15, 2023 at 20:46:19 PDT, seller added the following information: