Description:
Mini and lightweight, compact to use
Support 500-2500us 180-degree servo
One 3P cable (10cm in length) and one plug design, simple to connect
The steering gear is usually 180 degrees, but the remote control can only turn it 90 degrees
Specification:
Adapted voltage: 3.6-16V
Board size: Approx. 25x9mm
Application: Where you want to extend the angle with a remote control, such as (robot arm, homemade sailboat). Please note that some servos meet the limit plate before it reaches 180 degrees. Do not perform hard operation and cause the motor to stall. The steering gear reversal is to give the complementary signal of the steering gear, for example, it is currently 1500, and the motor sets the middle position. At this time, if the steering gear is rotated 9 degrees counterclockwise, the signal of 1600 should be given, but the reverser changes it. It is 1400 so that the steering gear rotates 9 degrees clockwise.
Principle:
The remote control pwm output is: 1000-2000us (At this time, the steering gear can rotate 90 degrees)
This device expands it to 500-2500us to achieve the purpose of rotating 180 degrees
Premise: The steering gear can rotate 180 degrees within the range of 500-2500us.
Package:
1x Servo Angle Expander
Note:
This is the extension of the remote control servo angle, which originally controlled 90 degrees, and expanded to control the 180 degree servo. It does not directly change the 90-degree steering gear to 180-degree.
