THIS IS 0.4s VERSION OF THE SID KICK. THE PLACEMENT OF THE PINS ALLOWS IT TO WORK IN OLD LONGBOARDS (407)

This is a complete, flashed and tested SIDKick + optional Midi Expansion included (board only).
A contribution from each sale goes towards supporting the developer of this project. 

INCLUDED IN THIS LISTING:

1 x BUILT TO ORDER COMPLETE SIDKICK with DAC
Angled Header Pins

1 x MIDI Breakout Board (PCB Only)

please read project details here before purchase:

https://github.com/frntc/SIDKick

PLEASE NOTE THAT THIS 0.4s VERSION WORKS WITH SHORT BOARD AND OLDER LONG 250407 LONGBOARDS

THE 0.4 VERSION FOR OTHER LONGBOARDs IS FOUND HERE :

https://www.ebay.com.au/itm/364565413917

I have tested it on a 250407 and it fits without the need of relocation. It will not fit on my c64c with 250466 boards.

The SIDKick has been flashed with the latest firmware and set for internal mono output. This can be changed by solder jumpers on the SIDKick board and by installation of a different firmware. Please let me know if you would like me to change or even patch the firmware with specific prgs you would like in the SID Kick launcher menu. The firmware is updated using "Teensy Uploader" and a micro usb data cable. 

These are some of the features of the SIDKick:

SIDKick is a versatile sound device for C64s and C128s: it serves as a drop-in replacement for the SID 6581/8580 sound chips, and at the same time provides Sound Expander-emulation (Yamaha OPL-based FM sound), a MIDI interface and can control LED stripes. It is based on a Teensy 4.1 and makes no compromises with regard to quality: the emulation is based on reSID and fmOPL. It also comes with a few extras.

Currently its features include:

dual 6581 and/or 8580 emulation based on reSID 0.16 or reSID 1.0 (configurable)
2nd-SID address at $d400, $d420, $d500, $d420 + $d500 simultaneously, $de00, $df00
Sound Expander/FM emulation based on fmOPL (at $df00), support for OPL sample playing technique
paddle/mouse support
built-in configuration menu (launch with "SYS 54301" or "SYS 54333", also from C128-mode)
built-in PRG launcher (via menu)
10 different profiles, switchable on-the-fly via an optional button (otherwise via menu), optional "SAM speech synthesis" telling you which one is selected
MIDI interface emulation and breakout connector (DATEL, Sequential, Namesoft and compatible interfaces based on the MC6850 UART IC, addresses at $de0x) 1
LED-stripes (WS2812b) support with several display modes (peak meter, color cycling, ...) 1
sound output via Teensy MQS (PWM) or high-quality using a PT8211/TM8211-DAC, filters, and an operational amplifier
output available at connectors (stereo) or routed through the mainboard (mono)