***PLEASE NOTE. WE NOW ONLY SHIP USING TRACKABLE SERVICES. ***
Description
Polyvine Multi Surface (was previously Crystal Clear) Satin Lacquer is a hard and durable, clear, cross linked protection – fast drying, it protects a wide range of surfaces
This high quality cross linked lacquer dries to a hard, clear satin or high satin film, with extremely good sanding properties and is specially formulated to bond to a wide range of surfaces.
Preparation
Ensure that surfaces to be varnished are clean, dry and free from dirt, dust, grease, wax, polish and any other surface contaminants.
Bare or New Wood
- Fill any gaps or minor imperfections in the wood with a suitable wood filler
- Lightly sand bare or new wood to provide a key
- Take care to remove all traces of sanding dust prior to varnishing
- Degrease wooden surfaces with a lint-free cloth dampened with Methylated Spirit if required
Previously Painted Surfaces
- Newly painted wood should first be sanded to provide a key
- Take care to remove all traces of sanding dust prior to varnishing
- Older painted wood, where the paint itself may fail, should be stripped using a hot air gun or a suitable paint stripper, then sanded and cleaned prior to coating with varnish
Polyvine Multi Surface (was previously Crystal Clear) Satin Lacquer is a hard and durable, clear, cross linked protection – fast drying, it protects a wide range of surfaces
This high quality cross linked lacquer dries to a hard, clear satin or high satin film, with extremely good sanding properties and is specially formulated to bond to a wide range of surfaces.
Preparation
Ensure that surfaces to be varnished are clean, dry and free from dirt, dust, grease, wax, polish and any other surface contaminants.
Bare or New Wood
- Fill any gaps or minor imperfections in the wood with a suitable wood filler
- Lightly sand bare or new wood to provide a key
- Take care to remove all traces of sanding dust prior to varnishing
- Degrease wooden surfaces with a lint-free cloth dampened with Methylated Spirit if required
Previously Painted Surfaces
- Newly painted wood should first be sanded to provide a key
- Take care to remove all traces of sanding dust prior to varnishing
- Older painted wood, where the paint itself may fail, should be stripped using a hot air gun or a suitable paint stripper, then sanded and cleaned prior to coating with varnish
Application
Ensure the product is well mixed but do not shake. Use a good quality synthetic varnish brush and apply evenly using light brush strokes. Apply the first coat, to prime porous surfaces, dilute with 10% water. and allow to dry. Apply one or two further coats.
It can also be used as a multi surface primer.
Ensure the product is well mixed but do not shake. Use a good quality synthetic varnish brush and apply evenly using light brush strokes. Apply the first coat, to prime porous surfaces, dilute with 10% water. and allow to dry. Apply one or two further coats.
It can also be used as a multi surface primer.
Caution
Always apply to a test area before starting work. Do not apply over uncured oil based paint. When applied over emulsion/latex paint, it is possible that the lacquer can draw certain stains through the paint, which would not otherwise be visible.
Always apply to a test area before starting work. Do not apply over uncured oil based paint. When applied over emulsion/latex paint, it is possible that the lacquer can draw certain stains through the paint, which would not otherwise be visible.
Storage
Protect from extremes of temperature during storage and application.
Protect from extremes of temperature during storage and application.
Health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes – wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.
Cleaning Equipment – Application equipment can be cleaned using soap and water before the varnish dries. Wipe any excess off surfaces with a damp, lint-free cloth. Any dried deposits will need a paint stripper to remove them.
Aftercare
Regular Cleaning
Surfaces coated with Polyvine Multi Surface Satin Lacquer can be wiped clean with a dampened lint-free cloth. Never soak wooden surfaces with water or use household detergents or cleaners as these can damage the finish.
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes – wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.
Cleaning Equipment – Application equipment can be cleaned using soap and water before the varnish dries. Wipe any excess off surfaces with a damp, lint-free cloth. Any dried deposits will need a paint stripper to remove them.
Aftercare
Regular Cleaning
Surfaces coated with Polyvine Multi Surface Satin Lacquer can be wiped clean with a dampened lint-free cloth. Never soak wooden surfaces with water or use household detergents or cleaners as these can damage the finish.