Twin Sytec OTP044 Fuel Pump And Bosch Filter Manifold Cradle Billet Assembly in Black

Comes with all the parts/filter/pumps as shown in the photos. 
This clever assembly enables one fuel tank feed to supply two Sytec Hi OTP044 pumps. 
The outputs of which are linked so that they utilise the Sytec check valves and feed into one High flow billet aluminium 30 micron stainless steel element filter ( Ethanol proof). 

The supply to the pumps and the output of the filter can be supplied in any AN size (AN-6, AN-8, AN-10 and AN-12)
The direction of the pump supply can be orientated so that it is in line or at 90 degrees to the output. 
The billet aluminium cradles are o-ring lined to surround the pumps and filters. This dampens any vibrations thus protecting the pumps and reducing running noise.

There is one double cradle to hold the two Sytec fuel pumps and one single cradle to hold the filter.
The top of the double cradle is slotted to enable the single cradle to slide into place. 
If the supplied allen bolt to hold the single and double cradles together isn't used then the filter can simply be slotted out/removed and replaced in seconds. 

The fuel pump cradles are also fitted with bespoke aluminium fasteners anodized to match the cradles. When removed these enable a allen key to pass through the hole in order to tighten the supplied mounting allen bolts onto a surface panel etc . (This is shown in the last two photos)

Manufactured from aluminium 6061-T6 and each component is precision-machined to exact tolerances for trouble-free performance.


We are a Sytec distributor so this is brand new and 100% genuine.


It comes with either AN-12, AN-10, AN-8 or AN-6 Fittings.  You decide. Pick one inlet and one outlet.

However as default it comes with AN10 In and AN8 Out Unless Others Requested

Popular options are;

AN-8 Inlet, AN-6 Outlet

AN-10 inlet , AN-8 Outlet

AN-12 inlet, AN-10 Oulet 


In our opinion this is the best external fuel pump set-up available capable of feeding enough fuel for 1000+ bhp . It is also excellent value when compared to the Aeromotive external fuel pumps. 

Fuel Pump Specification

Thread Input:- M18x1.5 Female

Thread Output:- M12x1.5 Banjo One Way Check Valve Stub (Female M12x1.5 Thread)

Pump:- P3044.1

Voltage:- 12v

Flow Ltr/Hr (Max):- 378

Flow Ltr/Hr @ 3 Bar (44psi):- 318

Flow Ltr/Hr @ 5 Bar (73psi):- 258

Max Pressure (Bar);- 10.4


Fuel Filter Specification

·         High-flow, 30-micron Stainless steel (fine) cleanable element.

· Magnetic filter element to collect even the microscopic swarf /debris etc

·      Flows 2,000 lb/hr with a pressure drop of less than 1 PSI.

·         Fittings available to adapt these filters to AN-10, -08 and -06 line sizes.

·   Designed to stand up to the destructive properties of alcohol based fuels, including ethanol and methanol. 

·   All filter assemblies feature an O-ring for positive sealing in high pressure applications.

·         CNC-machined from 6061-T6 aircraft aluminium.

·         Bright dip Black anodized finish for a corrosion resistant, show car quality appearance.

Replacement 30 Micron Stainless steel (Fine) elements are available separately

 Quick Overview