LEGO 10318 Creator Icons Expert Wall mount for the Lego Icons Concorde 10318

Not many have space to display this impressive model, and were better than on a wall! 

You can display it flying Left or Right as in the pictures

Fixes to the wall using 3 x 4.2mm x 30mm screws (not included) Beware of others who only use 1 or 2 screws! 

We use custom profiles to help produce the best quality 3D printed models & designs in high resolution printing.

All 3D Models / items are brand New & made in the UK. We aim to dispatch your order within 5 days some might be dispatched sooner if they are in stock, but most items are custom printed to order. (most are sent out within 24 hrs of  purchase) - Once you have received the dispatch notification via eBay's system then its been Printed & dispatched. 

If you need something quicker then please message to see if it's in stock. 

We dispatched with Royal Mail Signed for / tracked / Yodel / Evri depending on what the items is / Value. 

They are made from PLA / PLA + Plastic and are fully paintable so you can even match to wall colours if required etc. 

If you require it in a colour that we don't have listed then please message us and we will let you know thanks.

Once printed we quality check all models before dispatch to ensure that only the highest quality prints are dispatched, any fine finishing touches are the customers responsibility.

3D Print Disclaimer: - Please remember you are purchasing an unfinished 3D Printed item with the expectation of having to finish the item yourself (this doesn't mean that you will need to as most are perfectly usable with out any finishing) whether that be sanding, priming or painting etc. We are not charging you for the item itself, but our printing time, material used & P&P . All sizes are approximations and not exact.  
Although the 3D printed objects are made with high precision high quality machinery, they are by no means perfect like they have been injection moulded etc. We provide no liability of incorrect installation, Please ensure you use the correct fixings / length screws for the wall substrate you require fixing to. Do not mount above any people, animals or personal items. 


If you are after anything 3D printed please message us for a quote as we can design / print anything required. 

Made in the UK

** IMPORTANT ** - you must mount it as shown in the auction pictures which is the mount vertically and the brace bar / two screw holes at the top - if you do what 🤦🏽 'sarahd7659' 🤦🏽did and mount it horizontally then you will increase the load by 3 x what the mount was designed for due to the forces that Concorde will exert on the bracket as it will not be at the right angle of attack and the supporting brace will not be at the top either! resulting in the mount failing - This is not an issue with the mount but how it was installed - it's a bit like trying to drive a 7.5tonn vehicle over a bridge that has a max weight limit of 2 tons! then you moan the bridge clasped when you tried to drive the 7.5 ton vehicle over it! IF YOU ARE NOT SURE THEN PLEASE ASK BEFORE FITTING. 🤦🏽

“LEGO® is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse this item / sale / site”. 

*NOTE* If you select Random Colour then this can be ANY colour we have loaded in the printer, not just White, Black, Grey so you could end up with Yellow, Red, Blue, Purple, Pink, Green or any other colour etc.