|
Feature: 1. With automatic protection functions such as overcurrent, overvoltage, overheating, short circuit, etc.2. When the protected circuit enters an unsafe value, the built‑in protector automatically cuts off the circuit, and resumes normal operation when the value returns to the normal range. 3. It is potted with organic silica gel, which is waterproof, dustproof and anti‑vibration, and is suitable for use in various harsh environments. 4. Suitable for LED car display screens, surveillance cameras, electric fans, water pumps, motors, photovoltaic energy numerical control equipment, pumps, routers, ADSL modems, switches, LED lights, digital photo frames, electronic refrigerators, portable DVDs, stereos, security systems, portable tools, printers, network equipment, various industrial electrical equipment corresponding to voltages, etc. 5. Input voltage range: 8‑40V, output voltage: 5V, rated output current: 10A, output power: 50W. Specification: Condition: 100% Brand New Package List: 1 x Voltage ReducerNote: No.1: In order to ensure the normal operation of the converter within the input voltage range, the input voltage must not be lower than the minimum or maximum input value restricted by the product during use, and the input voltage value must be higher than the output voltage value by more than 2V, if there is no 2v differential pressure , The output value will become low, but it will not damage (affect) the use of the converter. No.2: The input current must be greater than or equal to the power required by the output load device (for example, if the power of the load device needs 100w, then the input power must be greater than or equal to 100w). When the converter is in use, the current of the load device should not be greater than the maximum current value that the converter can withstand, and leave as much margin as possible for the converter to ensure that the converter works normally to achieve the highest conversion efficiency. NO.3: The positive and negative poles of the converter cannot be reversed during use. Reversed connection may cause damage to the converter. It is recommended to add a suitable fuse to the input during use. No.4: The chip works in light load mode when there is no load, and the output voltage may vary within a certain range. |
