XProN TTL Wireless Flash Trigger can not only control the flashes with built-in Godox wireless X system, e g camera flashes, outdoor flashes and studio flashes, but also can control the Nikon original flashes when using in combination with X1R-N receiver. Featuring multi-channel triggering and stable signal transmission, this flash trigger applies to hotshoe-mounted Nikon series cameras.

Features:

Built-in Godox 2.4G Wireless X System & Versatile Using Methods

-As a wireless Godox Flash Trigger/ wireless Shutter Release Trigger/ wireless Nikon Speedlights Trigger/ Flash Trigger with 2.5mm Sync Cord Jack

Support i-TTL Autoflash and Professional Functions

-16 groups and 32 channels to wirelessly control and trigger Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively.

-Fully support TTL autoflash, 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation. TCM transform function, magnification function, one-shoot & multi- shoot setting, group modeling lamp control, group zooming, adjusting all groups1 output value simultaneously, etc.

Outstanding Design, Easy Operation and Great Portability

-Extra-large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation.

-XProN is quite portable for it only weighs 80g.

-Support Type-C USB firmware upgrade and wireless triggering by 2.5mm sync cord jack.

This flash trigger can be used on the following Nikon series camera models:

D5 D4 D60 D70S D90 D100 D200     

0300S D300 D500 D610 D7C0 D750   D800     

D810 D3100 D3200 D3300 D5000 D5100   D5200

D5300 D7000 D7100    

This flash trigger can be used to control the following flashes models:

Specifications:

Model: XProN

Compatible cameras: Nikon series cameras (i-TTL autoflash)Support for the cameras that have PC sync socket.

Power supply : 2’AA batteries

TTL autoflash :  i-TTL

Manual flash  : Yes

Stroboscopic flash       : Yes

High-speed sync : Yes

Second-curtain sync: Yes

Flash exposure compensation: Yes. 士3 stops in 1/3 stop increments

Flash exposure lock: Yes

Focus assist: Yes

Modeling lamp: Control the modeling lamp by the flash trigger

Beeper:  Control the beeper by the flash trigger

Wireless setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack

ZOOM setting:  Adjust the ZOOM value by the transmitter

TCM function : Transform the TTL shooting value into the output value in the M node

Firmware upgrade  : Upgrade through the Type-C USB port

Memory function: Settings will be stored 2 seconds after last operation and recover after a restart

Transmission range (approx.) : 0-100m

Built-in wireless: 24G

Modulation mode:  MSK

Channel  : 32

Wireless ID: 01-99

Group: 16

Display:  Large LCD panel, backlighting ON or OFF

Dimension/Weight :  90x58x50mm/80g