Xtreme Anti Mould Sanitary Silicone Sealant Kitchen Shower Wet Bathroom 310ml

Description:
A specially formulated sealant containing fungicide for sanitary applications in areas of high humidity. Conforms
to BS EN 15651‐1,3:2012

Benefits:
u High resistance to chemicals.
u Good tooling characteristics.
u Permanently flexible.
One part silicone sealant with excellent primerless adhesion to
enamel, tiles, glazed ceramic, glass, stainless steel, polycarbonate
glass (Plexiglass) and acrylics. Can also be used on wood,
aluminium, chrome, concrete, brick and PVC when used in
conjunction with a primer.
Bond It XTREME contains a biocide to prevent unsightly mould
growth.

Uses
Bond It XTREME can be used in swimming pool areas (but not IN
swimming pools). Ideal for sanitary applications including
connection and expansion joints in bath rooms, kitchens, toilet
areas and swimming pool areas.
 
Preparation
Ensure all surfaces are clean, dry and free from grease or any
contaminants that may hinder adhesion. Remove any old sealant.
Application
Apply using a standard sealant gun with the nozzle cut at an angle
of 45°, and to an opening slightly larger than the joint to be
sealed.
For bath surrounds: 1/2 fill bath with water to allow sealant to be
applied at joint mid point. If necessary masking tape may be
applied. If large gaps are to be filled, polythene foam, rod or tape
should be used to provide support and minimise sealant wastage.
Tool down within 5 minutes using a wet
spatula or Bond It SEALANT APPLICATOR
TOOL. Wait until silicone has cured before
emptying the bath of the water. Any trims
should be bedded into the silicone within
5 minutes.
For sealing waste outlets in sinks and baths: XTREME should be

applied so that it will be in compression after tightening of
connecting pipes.
For metalised plastic trims: test for discolouration by sealant
before use.

Limitations
Due to the large number of existing paint systems, it is necessary
to conduct a compatibility test to ensure suitability.
There is also danger of yellowing on contact with white alkyd resin
paints. Risk of corrosion when used on bare iron or non-ferrous
metals.
 
Container Size
310ml plastic cartridge.
Colours
XTREME comes in 3 colours: white, clear and grey.
Shelf Life
12 months from date of manufacture when stored in unopened
cartridges.
Storage Conditions
Store in cool, dry conditions.
Disposal of Containers
Do not leave empty containers where residue could be harmful to
children, animals or the environment. Remove any containers to a
central disposal point in accordance with local regulations.
 
Health & Safety
Please refer to separate material safety data sheet for full
handling, use and storage instructions. Keep out of reach of
children. It is the users responsibility to determine suitability for
use. If in doubt contact our Technical Department for advice.
Note: this information is for general guidance only, since site conditions
and labour are beyond our control. It is recommended that users make
their own tests to determine suitability.
Never compromise on quality!
 
Package Content:
Xtreme Anti Mould Sanitary Silicone Sealant Kitchen Shower Wet Bathroom 310ml