2x Bond-It Coving Adhesive Glue White Gap Joint Filler Polystyrene EU3 Cartridge

Description
A high strength, solvent­ free, gap ­filling coving and decorating adhesive.
COVE­MATE is a solvent ­free, quick grab,
interior coving and decorating adhesive. It
replaces mechanical fixings in a multitude of
home improvement applications. Dries to a
white finish and can be over painted once dry

Uses
Bond It COVE­MATE is ideal for fixing polystyrene
and PU covings, skirting boards, architraves and
dado rails, etc. It can be used internally on plaster,
brick and stone. It is also suitable for bonding work
tops to base units and for bonding cork tiles and
cork sheet.

Preparation
Ensure all surfaces to be bonded are clean, dry
and free from grease, dust or any other
contaminants that may hinder adhesion.

Application
Carefully cut the tip off cartridge. Cut nozzle to
required width of bead at a 450 angle and attach to
cartridge. Place cartridge in a standard sealant gun.
For lightweight items (eg. coving, dado rails and
skirting) apply the adhesive to the back of the item
in one or two continuous 6mm beads and press
immediately into place.
For bonding heavy items (eg. plasterboards, work
tops and wall panels) apply the adhesive all the
way around approx 30­50mm from the edge. Apply
adhesive direct to battens also and then press the
item in to place. Note: with heavy items we
recommend providing temporary support until the
adhesive has dried.
Clean any excess material with a damp cloth. Full
bond strength will be achieved 24­48 hours after
application.

Limitations
­ At least one of the surfaces must be porous.
­ Not suitable for polythene, polypropylene,
Teflon or nylon.
­ On low porosity surfaces or in damp, cold or
humid conditions, curing time may be
significantly affected.
­ Only apply between 5o C and 30 oC.
­ Not recommended for plaster coving.

Container Size
EU3 plastic cartridge.

Shelf Life
Use within 2 years from date of manufacture.
Store in unopened cartridges.

Storage Conditions
Store in cool, dry conditions and protect from
frost.

Disposal of Containers
Do not leave empty containers where residue
could be harmful to children, animals or the
environment. Remove any containers to a
central disposal point in accordance with local
regulations.

Health & Safety
Please refer to separate material safety data
sheet for full handling, use and storage
instructions. Keep out of reach of children. It is
the users responsibility to determine suitability
for use. If in doubt contact our Technical
Department for advice.

Specification Summary
Flammability Non flammable
Application Temperature 5o
C to 30oC

Container Sizes:
Code: BDCMWH
Size: EU3
Colour: White
Barcode: 5060021364678

Package Content
2x Cove Mate Coving Decoration Adhesive Gap Filling Quick Grab White EU3 Cartridge