Description
WAVE ROVER Full Metal Robot Chassis Flexible and Expandable 4WD Mobile Robot Car Onboard ESP32 Module with 0.91-inch OLED
Features:
- The WAVE ROVER is a full metal body 4WD mobile robot chassis, which features superb off-road crossing ability and shock-absorbing performance, open source all code for secondary development. It supports multiple host computers (for Raspberry Pi, for Jetson Nano, for Jetson Orin Nano, etc), the host computer can communicate with the ESP32 slave computer through the serial port. Equipped with four N20 geared motors using a high-quality gearbox, which allows the mobile robot to drive at high speed with great power. Built in 3S UPS power supply module, supports 3 x 18650 Li batteries (in series, NOT included), which provides uninterruptible power for the robot and supports charging and power output at the same time. Built in multi-functional robot driver board, based on ESP32, with onboard WIFI and Bluetooth, for driving serial bus servos, outputting PWM signal, expanding TF card slot, etc.
- The WAVE ROVER adopts flexible rubber tires which greatly reduce the impact of complex terrains, can easily meet the needs of high-speed driving, shock absorption, and off-road. Comes with a mounting plate, can be used to install the host computers (for Raspberry Pi 4B, for Jetson Nano, for Jetson Orin Nano, etc.), LD19/STL-27L lidar, and pan-tilt camera, providing more possibilities for secondary development.
Specification:
- Dimension: 194 x 168 x 100mm
- Tire material: Nylon wheel hub, rubber tire
- Chassis height: 33.7mm
- OLED: 0.91-inch
- Tire width: 42.5mm
- Running speed: 1.25m/s
- Tire diameter: 80mm
- Number of driving wheels: 4
- Motor: N20 12V; 200RPM x 4
- Body material: 2mm (thickness) 5052 aluminum alloy
- Net weight: 860g
- Vertical obstacle ability: 40mm
- Driving payload: 0.8kg
- Climbing ability: 22°
- Battery support: 18650 Lithium battery x 3
- Minimum turning radius: 0m (In-situ Rotation)
- Motor power: 1.5W x 4
- Remote control function: WIFI AP/STA
- Upper surface area: 17551mm2
- Communication interface: UART / serial bus servo interface / I2C
Data Information:
- www.waveshare.net/wiki/WAVE_ROVER
Package Included:
- 1 x Set of WAVE ROVER Robot Chassis
Features:
- The WAVE ROVER is a full metal body 4WD mobile robot chassis, which features superb off-road crossing ability and shock-absorbing performance, open source all code for secondary development. It supports multiple host computers (for Raspberry Pi, for Jetson Nano, for Jetson Orin Nano, etc), the host computer can communicate with the ESP32 slave computer through the serial port. Equipped with four N20 geared motors using a high-quality gearbox, which allows the mobile robot to drive at high speed with great power. Built in 3S UPS power supply module, supports 3 x 18650 Li batteries (in series, NOT included), which provides uninterruptible power for the robot and supports charging and power output at the same time. Built in multi-functional robot driver board, based on ESP32, with onboard WIFI and Bluetooth, for driving serial bus servos, outputting PWM signal, expanding TF card slot, etc.
- The WAVE ROVER adopts flexible rubber tires which greatly reduce the impact of complex terrains, can easily meet the needs of high-speed driving, shock absorption, and off-road. Comes with a mounting plate, can be used to install the host computers (for Raspberry Pi 4B, for Jetson Nano, for Jetson Orin Nano, etc.), LD19/STL-27L lidar, and pan-tilt camera, providing more possibilities for secondary development.
Specification:
- Dimension: 194 x 168 x 100mm
- Tire material: Nylon wheel hub, rubber tire
- Chassis height: 33.7mm
- OLED: 0.91-inch
- Tire width: 42.5mm
- Running speed: 1.25m/s
- Tire diameter: 80mm
- Number of driving wheels: 4
- Motor: N20 12V; 200RPM x 4
- Body material: 2mm (thickness) 5052 aluminum alloy
- Net weight: 860g
- Vertical obstacle ability: 40mm
- Driving payload: 0.8kg
- Climbing ability: 22°
- Battery support: 18650 Lithium battery x 3
- Minimum turning radius: 0m (In-situ Rotation)
- Motor power: 1.5W x 4
- Remote control function: WIFI AP/STA
- Upper surface area: 17551mm2
- Communication interface: UART / serial bus servo interface / I2C
Data Information:
- www.waveshare.net/wiki/WAVE_ROVER
Package Included:
- 1 x Set of WAVE ROVER Robot Chassis
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Dec 7, 2023 at 22:04:46 PST, seller added the following information: