|
It can realize the functions of glass-ceramiccrystallization,glazing, porcelain baking,porcelain mending, dyeing, ring burning andso on. Small and compact, occupying a smallspace, it is very easy to place and store. It isespecially suitable for dental hospitals, clinicsand denture studios that are clean, tidy andhave space requirements. It can be used withchair-side CNC,and almost all tasks can becompleted in a very small space. In addition,it is extremely convenient to carry. In extremecases, it can be started by using 12V batterypower supply with the driver. It is not afraid ofpower failure and other interference, and doesnot affect the operation of temporary porcelainmending, dyeing and so on.
FUNCTIONS
● Hyperbolic ceramic furnace function, the program can be set to single curve mode or hyperbolic mode, hyperbolic mode provides a complete crystallization process for glass-ceramic crystallization.
● Voice prompt function.
● High quality temperature automatic adjustment function, to ensure that the actual temperature error within + / - 1 degrees.
● Portable for easy transfer and storage.
● Quartz spiral furnace.
● Automatic temperature calibration before each baking procedure.
● The built-in vacuum pump can reach - 90kpa at most.
● True color touch screen, easy to operate.
● 99 custom programs and built-in programs.
● Automatic detection of furnace door closing before heating.
● Full body high thermal conductivity silicon carbide reflection furnace.
TYPICAL APPLICATION
SPECIFICATIONS
OPERATION：
The velocity of temperature increasing: 100℃/min max. (212°F /minute)
The max temperature: : 1100℃ max (2012°F)
The time which can be kept at the max temperature: 2 H
Vacuum level:1-101%
ELECTRIC POWER：
Operation range：100-120V 50/60HZ 230V 50/60HZ
Electric current：14.5ampere@110V 7.0ampere@230V
Power：max 1500w
TYPICAL SPECIFICATION：
WxDxH :width 18cm Depth 25cm Height 38.5cm
Usable measure (firing chamber): 7*7cm square
AMBIENT CONDITIONS
• Indoor use
• Ambient temperature: 2°C to 40°C
• Relative humidity 80% at 31°C
• Maximum altitude: 1500 m (Special Model:3500m)
• Rated voltage fluctuations must not exceed plus/minus 10% of the rated voltage .
COMPLETE WITH:
• 1 firing pan
• 1 spare wrench for furnace door
• 1 connection cable for the mains power supply
• 1 instructions
• 1 Burning rack
|