Set of 2  ( Pair)

Universal Mud Flaps
Fitment instructions:
Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch if you do then these mudflaps will just simply screw on but you may need to bore guide hole. Please note if arches are rolled and you dont have a 10mm surface to screw to then you will need to use clips for fitting. These can be bought in any motor factors.

1. First thing to do when fitting is line the mudflaps to the edge of bumper.

2. If you need to bore guide holes for screws you will need to do this now. Note : With larger rear wheels you may need to take these of to fit rear mudflaps for the wheels on the front you should be fine as you can lock the steering for fitting.

3. Now screw into place and make sure they line up correctly and job is done. 

Please note to do the front and rear of the car you will need to buy to 2 of these mudflaps. 

These screw type mudflaps will fit 99% of vehicles and are a quick and inexpensive way of ensuring your car is protected from day to day wear and tear. Made from 100% rubber these flaps easily shape around the contour of the wheel arch.
Fitting position: Front or RearScrews providedLength: 12" / 300mmWidth (across the bottom) : 8" / 210mm