• 2 Ton Scissor Jack Wind Up Tyre Lift Garage Home Auto Car Emergency Tool Repair for Car Van 2 Tons (4410 lbs) Capacity Saving Strength Design Crank Lift Stand Tool

    • 2 Ton Scissor Jack Wrench Jack Handle Crank Tool Car Van Garage Tire Wheel Lug

    2 Ton Scissor Jack Wind Up Tyre Lift Garage Home Auto Car Emergency Tool Repair for Car Van 2 Tons (4410 lbs) Capacity Saving Strength Design Crank Lift Stand Tool

    Product Descriptions:
      The 2 Ton Scissor Jack can be used as a rugged replacement jack or an extra utility jack that can be easy stored in the trunk of your car.
      With the scissor jack you can easily and quickly adjust the height of your vehicles.
      With tooth gears, the scissor jack can be extended from 85mm (close position) to 400mm, more than enough to lift most vehicles. Working Height: 230-320mm.
      The solid base plate also ensures a secure footing, corrosion-resistant, Strong metal construction made of steel, withstands high pressure.
      Ratchet handle Saving Strength and Stable Design

     

    Specification:
    Type: Scissor Jack
    Maximum Weight Capacity: 2 tonne / 4410 LBS
    Minimum Height: 850mm (Lowered)
    Maximum Height: 400mm (Raised)
    Lifting Height: 230-320mm
    Item Weight:
    Item Size: As picture
    (Please allow 0.5-2 cm differences due to manual measurement.)
    Material: Steel
    Suitable for small and medium sized vehicles.

    CAUTIONS:
    Set parking brake firmly and set automatic transmission In "P", manual transmission in First or Reverse.
    Use wheel chocks or blocks to fix other wheels
    Place jack at jack-up points only.
    Never jack up more than necessary.
    Never get beneath vehicle when it is supported by jack.
    Never use blocks on or under jack.
    Park on a horizontal surface.
    When jack is not in use, lifting arm should be in full down position.
    Where possible, support the lifted car with Jack stands.
    Working height:230-320mm / 9-12.6 inch

    HEIGHT/CAPACITY CURVE
    This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position.

    OPERATING INSTRUCTIONS
    1. Insert the jack handle into the hole of the handle socket.
    2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
    3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
    4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.

     

    Package Included:
    1x 2 Ton Scissor Jack
    1x Handle


    Item Specifics
    Brand Unbranded
    Manufacturer Part Number Does Not Apply
    Type Scissor Jack
    Vehicle Type ATV
    Number of Pieces 1
    Drive Manual
    Material Steel
    Warranty Lifetime
    Set or Single Item Set
    Capacity per Stand 2000lbs.
    Maximum Lift Height 360MM
    Minimum Height 90MM
    Custom Bundle No
    Modified Item No
    Country/Region of Manufacture China

    Return Policy

    Restocking fee: There will be a 20% restocking fee if returning mistakenly order or no longer needed item, read the tips below on how to avoid it.

    1. Read the item description carefully instead of only the listing title.
    2. Choose the correct item from the drop-down menu (if applicable) before clicking on the add to cart button.
    3. If you have any questions regarding the item, please send us a message before purchasing.

    Installation Fee: All LCD in original condition may be returned within (30) days from the purchase date for a full refund without installation. We highly recommend to our customers to test the LCD and make sure it is fully functioning before installation since the components on the LCD is fragile and can easily be damaged by static electricity or other factors that causes image or touch issues. Depending on the used condition of the LCD, it may be Disqualified for a return or charging a 20% installation Fee.
    DOA (Dead On Arrival): Take a picture of the outer box if you have received a damaged package, check all the contents inside for any physical damage and send the pictures to us as evidence within 3 Days for a return or refund.

    LCD Test Instruction

    1.Wear Anti-Static Gloves or a Wrist Strap to release any static electricity before touching the LCD.
    2.Check the pins on the flex cable connector to see if any of them is bent or missing.
    3.Check around the LCD and make sure none of the components are damaged.
    4.Check the light reflection on the LCD under a lamp to see if any of the areas have a different color.
    5.Connect the LCD and Digitizer/Touch flex cables to your device's motherboard connectors first. *DO NOT install the LCD onto the device BEFORE testing the parts!
    6.Move an icon around on your screen to make sure the display and touch are fully functional.

    Payment

    We only accept payment via PayPal.
    Please make your payment within 5 days after auction ends otherwise a non-payment dispute will be opened.
    Before purchasing, please make sure that your address is correct.
    After getting the returned item, we will refund the customer at the item's price

    Contact Us

    We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. We will solve any from problem for our valued customer.

    Shop Category
     Store Home
     For Samsung Digitizer
     For iPhone Digitizer
     For Samsung Tablet
     For Apple Tablet
     Other Tablet Accessories
     For iPhone Case
     Smart Watch Accessories
     Memory RAM
     Front Glass
     Stylus
     Z Wholesale
     L Wholesale
     Other
    Hot Item
    Delivery

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    2 Ton Scissor Jack Wrench Jack Handle Crank Tool Car Van Garage Tire Wheel Lug

    2 Ton Scissor Jack Wind Up Tyre Lift Garage Home Auto Car Emergency Tool Repair for Car Van 2 Tons (4410 lbs) Capacity Saving Strength Design Crank Lift Stand Tool

    Product Descriptions:
      The 2 Ton Scissor Jack can be used as a rugged replacement jack or an extra utility jack that can be easy stored in the trunk of your car.
      With the scissor jack you can easily and quickly adjust the height of your vehicles.
      With tooth gears, the scissor jack can be extended from 85mm (close position) to 400mm, more than enough to lift most vehicles. Working Height: 230-320mm.
      The solid base plate also ensures a secure footing, corrosion-resistant, Strong metal construction made of steel, withstands high pressure.
      Ratchet handle Saving Strength and Stable Design

     

    Specification:
    Type: Scissor Jack
    Maximum Weight Capacity: 2 tonne / 4410 LBS
    Minimum Height: 850mm (Lowered)
    Maximum Height: 400mm (Raised)
    Lifting Height: 230-320mm
    Item Weight:
    Item Size: As picture
    (Please allow 0.5-2 cm differences due to manual measurement.)
    Material: Steel
    Suitable for small and medium sized vehicles.

    CAUTIONS:
    Set parking brake firmly and set automatic transmission In "P", manual transmission in First or Reverse.
    Use wheel chocks or blocks to fix other wheels
    Place jack at jack-up points only.
    Never jack up more than necessary.
    Never get beneath vehicle when it is supported by jack.
    Never use blocks on or under jack.
    Park on a horizontal surface.
    When jack is not in use, lifting arm should be in full down position.
    Where possible, support the lifted car with Jack stands.
    Working height:230-320mm / 9-12.6 inch

    HEIGHT/CAPACITY CURVE
    This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position.

    OPERATING INSTRUCTIONS
    1. Insert the jack handle into the hole of the handle socket.
    2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
    3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
    4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.

     

    Package Included:
    1x 2 Ton Scissor Jack
    1x Handle


    Return Policy

    Restocking fee: There will be a 20% restocking fee if returning mistakenly order or no longer needed item, read the tips below on how to avoid it.

    1. Read the item description carefully instead of only the listing title.
    2. Choose the correct item from the drop-down menu (if applicable) before clicking on the add to cart button.
    3. If you have any questions regarding the item, please send us a message before purchasing.

    Installation Fee: All LCD in original condition may be returned within (30) days from the purchase date for a full refund without installation. We highly recommend to our customers to test the LCD and make sure it is fully functioning before installation since the components on the LCD is fragile and can easily be damaged by static electricity or other factors that causes image or touch issues. Depending on the used condition of the LCD, it may be Disqualified for a return or charging a 20% installation Fee.
    DOA (Dead On Arrival): Take a picture of the outer box if you have received a damaged package, check all the contents inside for any physical damage and send the pictures to us as evidence within 3 Days for a return or refund.
    LCD Test Instruction

    1.Wear Anti-Static Gloves or a Wrist Strap to release any static electricity before touching the LCD.
    2.Check the pins on the flex cable connector to see if any of them is bent or missing.
    3.Check around the LCD and make sure none of the components are damaged.
    4.Check the light reflection on the LCD under a lamp to see if any of the areas have a different color.
    5.Connect the LCD and Digitizer/Touch flex cables to your device's motherboard connectors first. *DO NOT install the LCD onto the device BEFORE testing the parts!
    6.Move an icon around on your screen to make sure the display and touch are fully functional.

    Payment

    We only accept payment via PayPal.
    Please make your payment within 5 days after auction ends otherwise a non-payment dispute will be opened.
    Before purchasing, please make sure that your address is correct.
    After getting the returned item, we will refund the customer at the item's price

    Contact Us

    We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. We will solve any from problem for our valued customer.


    All rights reserved.