Description
6 Axis Mach3 Controller Board CNC Motion Controller Support USB + Ethernet For CNC Engraving Machine
Features:
- It also has dual USB/Ethernet (Ethernet) interfaces.
- 100M Ethernet interface, built-in network transformer isolation, supports long-distance wired connection. With wireless router, it can realize the wireless connection between PC (notebook computer) and motion control board.
- Support 6-axis linkage, 500KHz output at the same time, connected to servo/stepping. Any one axis can be configured as a pulse spindle.
- 2 real-time electronic handwheel (MPG) input ports, which can connect 2 electronic handwheels at the same time. When the MACH3 electronic handwheel is set in Multi-Step mode, it has the same real-time performance as the CNC machining center, and runs smoothly. There is no delay in the control board, and the performance of the mechanical system is fully utilized.
- With real-time jog, the control panel has no delay, the motor responds quickly and flexibly, and the experience is zero delay.
- 18 general digital input points, corresponding to 1 LED indicator, self-defining configuration function in MACH3.
- 8 general-purpose digital output points, configurable as: spindle start/stop/coolant/custom M code VBasic programming control
- 1 PWM output point for analog spindle speed control: pulse width speed control / 0-10V inverter speed control.
- 2 analog inputs, used to adjust the processing speed / jog speed / spindle speed.
- 1 status indicator, which can prompt USB/Ethernet (Ethernet) connection, and various statuses of the motor are clear at a glance.
- It adopts 6 dual-channel 10Mhz high-speed optocouplers and 28 general optocouplers, totaling 34 optocouplers to isolate all inputs/outputs. Onboard an isolated power supply, high-cost design provides complete anti-interference performance and complete safety protection.
- 168M speed, without PC intervention, the signal is processed independently by the motion control card, to ensure that you have real-time and reliability.
- Support all versions of Mach3. Support for all versions of Windows XP to Windows10 (32-bit/64-bit), and no driver is required, all versions for Windows are plug and play.
- The chip firmware supports upgrades, and users can continuously get the latest function support.
- Provide a complete installation manual with clear documentation, illustrations and detailed descriptions.
Environmentally friendly copper pluggable terminals
100M Ethernet interface / USB interface / isolated power supply
Network cable connection
USB cable connection
6-axis output signal (direction signal + pulse signal): 10MHz high-speed optocoupler isolation x12 channels
Optocoupler isolation PWM spindle speed control signal output x1 / Optocoupler isolation general output x8
Power input: self-recovery fuse + anti-reverse diode + TVS anti-surge diode
Optocoupler isolated NPN input x16
External magnification knob
Connect Controller Board To Laptop PC:
Connection Via USB Cable
Direction Connection Via Ethernet Cable
Network cable passes through a router
Wireless network (WLAN)
Download Manual (EDG381) 1.0.7 version (ZIP/9M).
http://leafboy77.com/files/usb_eth_edg381/Mach3_USB_Ethernet_Motion_Board(EDG381)Installation_Manual(english).zip
Download Plugin (eMotionMach3.ZIP/0.3M) 1.2.1.0 version.
http://leafboy77.com/files/usb_eth_edg381/eMotionMach3.zip
Download Latest Mach3:
http://www.machsupport.com/software/mach3/
Schematic Diagram:
USB main control chip + external magnification knob x2
10MHz high-speed optocoupler isolation x12 channels
Optocoupler isolated NPN input x16 + Optocoupler isolated PNP input x2
Optocoupler isolation general output x8 + Optocoupler isolation PWM spindle speed control signal output x1
Ethernet interface chip
Power + isolated power
Package Included:
- 1 x Set of CNC Controller Board
Note:
- Other items are not included, for demonstration purposes only. Thank you for your understanding!
Features:
- It also has dual USB/Ethernet (Ethernet) interfaces.
- 100M Ethernet interface, built-in network transformer isolation, supports long-distance wired connection. With wireless router, it can realize the wireless connection between PC (notebook computer) and motion control board.
- Support 6-axis linkage, 500KHz output at the same time, connected to servo/stepping. Any one axis can be configured as a pulse spindle.
- 2 real-time electronic handwheel (MPG) input ports, which can connect 2 electronic handwheels at the same time. When the MACH3 electronic handwheel is set in Multi-Step mode, it has the same real-time performance as the CNC machining center, and runs smoothly. There is no delay in the control board, and the performance of the mechanical system is fully utilized.
- With real-time jog, the control panel has no delay, the motor responds quickly and flexibly, and the experience is zero delay.
- 18 general digital input points, corresponding to 1 LED indicator, self-defining configuration function in MACH3.
- 8 general-purpose digital output points, configurable as: spindle start/stop/coolant/custom M code VBasic programming control
- 1 PWM output point for analog spindle speed control: pulse width speed control / 0-10V inverter speed control.
- 2 analog inputs, used to adjust the processing speed / jog speed / spindle speed.
- 1 status indicator, which can prompt USB/Ethernet (Ethernet) connection, and various statuses of the motor are clear at a glance.
- It adopts 6 dual-channel 10Mhz high-speed optocouplers and 28 general optocouplers, totaling 34 optocouplers to isolate all inputs/outputs. Onboard an isolated power supply, high-cost design provides complete anti-interference performance and complete safety protection.
- 168M speed, without PC intervention, the signal is processed independently by the motion control card, to ensure that you have real-time and reliability.
- Support all versions of Mach3. Support for all versions of Windows XP to Windows10 (32-bit/64-bit), and no driver is required, all versions for Windows are plug and play.
- The chip firmware supports upgrades, and users can continuously get the latest function support.
- Provide a complete installation manual with clear documentation, illustrations and detailed descriptions.
Environmentally friendly copper pluggable terminals
100M Ethernet interface / USB interface / isolated power supply
Network cable connection
USB cable connection
6-axis output signal (direction signal + pulse signal): 10MHz high-speed optocoupler isolation x12 channels
Optocoupler isolation PWM spindle speed control signal output x1 / Optocoupler isolation general output x8
Power input: self-recovery fuse + anti-reverse diode + TVS anti-surge diode
Optocoupler isolated NPN input x16
External magnification knob
Connect Controller Board To Laptop PC:
Connection Via USB Cable
Direction Connection Via Ethernet Cable
Network cable passes through a router
Wireless network (WLAN)
Download Manual (EDG381) 1.0.7 version (ZIP/9M).
http://leafboy77.com/files/usb_eth_edg381/Mach3_USB_Ethernet_Motion_Board(EDG381)Installation_Manual(english).zip
Download Plugin (eMotionMach3.ZIP/0.3M) 1.2.1.0 version.
http://leafboy77.com/files/usb_eth_edg381/eMotionMach3.zip
Download Latest Mach3:
http://www.machsupport.com/software/mach3/
Schematic Diagram:
USB main control chip + external magnification knob x2
10MHz high-speed optocoupler isolation x12 channels
Optocoupler isolated NPN input x16 + Optocoupler isolated PNP input x2
Optocoupler isolation general output x8 + Optocoupler isolation PWM spindle speed control signal output x1
Ethernet interface chip
Power + isolated power
Package Included:
- 1 x Set of CNC Controller Board
Note:
- Other items are not included, for demonstration purposes only. Thank you for your understanding!
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.