600W Micro Grid Tie Inverter for 24V - 96V Battery Adjustable output power MPPT

600W MPPT Pure Sine Wave Micro Grid Tie Inverter 24V 48V Battery Discharge Adjustable to AC 110V or 220V MPPT Solar Panel Grid Tie Inverter CE
The latest producted item (600ADJ)would be with new  improved potentiometer and there would be no  Aluminum fin heat sink  for new produced 600W grid tie inverters but with two fans.(you may still receive old version before  end Dec ,2022)

Specifications:

Rated Power	600W
Input(DC)
PV open voltage range		26V-45V		39V-60V		55V-90V		85V-130V		120-180V
PV MAX input power(W)	7000W
MPPT Voltage range(V)		22-34VDC		33-47VDC		44V-70VDC		66-100VDC		90-140V
MPP tracking efficiency	>99%
MAX.DC current(A)		30A		20A		15A		10A		10A
Suitable for Battery voltage(V)		24V		36V		48V		72V		96V
Battery Low Voltage Protection(V)		22V		33V		44V		66V		88V
Output(AC)
PV mode AC MAX output (W)	500
Battery mode Max output power			450W		450W		450W		450W		450W
AC output range	220VAC(190-260VAC) or 120VAC(90-135VAC)
Frequency range	50Hz(48~52) or 60Hz(58~62)
Power Factor	>98%
THD	<5%
Phase Shift	<1%
Stable real efficiency / 120V		87%		88%		89%		89%		91%
Stable real efficiency / 220V		88%		89%		91%		92%		94%
Other electrical data
Protection	Islanding; Short-circuit; Low Voltage; Over Voltage; Over temperature Protection
Work Temperature	‘-25°C~ 80°C
Work Humidity	0%~90%RH non-condensing
Grade of Waterproof	Outdoor design  IP22
LED Show	R&G&B LED
Cooling	Fan
Stand-by Power	<1W
Matching component:	Monocrystalline ,polycrystalline , thin-film solar panels.
Mechanical data
Net Weigtht	2.2kgs/pc
Gross Weight	2.5kgs/pc
Machine size(LxWxH)	22.2x16.2x6.5CM
Packing Size (LxWxH)	32x22x12CM

PV grid-connected inverter operating mode

The grid-tied inverter has an automated working order, without needing to monitor. On detection the power output from solar panels, device will decide if the power was large enough to begin the conversion process. Coversion process includes 5 modes, Startup, Grid-tied begin, Standby, Stop, Fault-find.
Startup - When the start button is on, solar panel and grid lines both connected in normal condition, inverter enters working condition.
Grid-tied begin - Grid-tied begin mode is when inverter starts to convert the Direct Current fed through from PV solar panel to a stable Alternate Current and flow to the utility grid. To enable the maximum output of energy, the device uses MPPT control technology to track sun rays, this technology promises the maximum efficiency under diferent daylight and temperature conditions.
Standby - Standby mode is when device detects insufficient power feeding through from the solar panel, or device detects abnormal status such as voltages, frequencies, and temperatures not in the permitted range, the device enters standby mode.
Stop - Insufficient sunlight hence insufficient PV power feeding through to the device and device enters into the standby mode, when this condition continues and DC voltages falls below 12V for over 1 minute, the device will enter Stop mode.
When error ocurs, fault find indicator starts flashing, device will enter Stop mode. Please see 3.4 error status on LED indicator.

(Battery) discharge and grid mode(With ADJ function models)

1.The DC input of the system can be directly connected with the battery, Turn the knob of the inverter to the right into the battery mode, then the tracking function will be turned off, the output power will be adjusted from left to right, At this point the output power can be adjusted from 80W-450W or so arbitrary output to ensure that the inverter can work for a long time in the grid status.
2. When the inverter connected to the battery discharge, if the battery voltage is too low, the inverter will automatically stop and cut off grid output to protect the battery over discharge to extend battery life.
3.Different specifications of the input voltage of the inverter will be used with different voltage battery, the battery voltage protection point please refer to the following

Battery voltage	Inverter Input	Battery Low voltage protection	Battery high voltage protection
12V battery	16V~28V	11V	14.5V
24V battery	26V~45V	21V	29V
36V battery	40V~62V	33V	43.5V
48V battery	55V~90V	44V	58V
60V battery	48V~86V	55V	72.5V
72V battery	85V~130V	66V	87V
96V battery	120V-180V	88V	120V